Configurable product options question

[skhalil]

Hi community,

I cannot found the detail of a configuration (i.e. options) of a configurable product in the order. Suppose, I buy a configurable PC, how can the backoffice do an assembly of that PC if the chosen configuration is not stocked somewhere, or if the user want to cancel an option or modify it how can it be done? Also if I want to update an order from the backoffice, and add a configurable product, how can I pick my options?

Thanks & regards,

Khalil

[BJ Freeman]

there has been quite a bit of discussion both on the user and dev lists.
some has to do with dealing with the configuration after an order is placed.

However the actual ordering process to the creation is covered and
works. If you don't have the inventory then it will not run the process
and will not put in inventory as a completed item.
Remember these configuration are built at the time of the order, to the
raw materials must be in inventory.

skhalil sent the following on 7/16/2008 10:03 AM:

> Hi community,
>
> I cannot found the detail of a configuration (i.e. options) of a
> configurable product in the order. Suppose, I buy a configurable PC, how can
> the backoffice do an assembly of that PC if the chosen configuration is not
> stocked somewhere, or if the user want to cancel an option or modify it how
> can it be done? Also if I want to update an order from the backoffice, and
> add a configurable product, how can I pick my options?
>
> Thanks & regards,
>
> Khalil
>

[skhalil]

Thanks for your reply BJ, I understand that the parts must be in stock to complete processing the order, but when the order is processed, is there somewhere where I can find the configuration picked by the customer ? Because I need to keep track of this config for further use, and not just use it to obtain a total price (as I said to know how to assemble the ordered PC for example).

Regards,

Khalil

BJ Freeman wrote

there has been quite a bit of discussion both on the user and dev lists.
some has to do with dealing with the configuration after an order is placed.

However the actual ordering process to the creation is covered and
works. If you don't have the inventory then it will not run the process
and will not put in inventory as a completed item.
Remember these configuration are built at the time of the order, to the
raw materials must be in inventory.

skhalil sent the following on 7/16/2008 10:03 AM:
> Hi community,
>
> I cannot found the detail of a configuration (i.e. options) of a
> configurable product in the order. Suppose, I buy a configurable PC, how can
> the backoffice do an assembly of that PC if the chosen configuration is not
> stocked somewhere, or if the user want to cancel an option or modify it how
> can it be done? Also if I want to update an order from the backoffice, and
> add a configurable product, how can I pick my options?
>
> Thanks & regards,
>
> Khalil
>

[hans_bakker]

please check the manufacturing run which is created.....

On Wed, 2008-07-16 at 14:36 -0700, skhalil wrote:

>
> Thanks for your reply BJ, I understand that the parts must be in stock to
> complete processing the order, but when the order is processed, is there
> somewhere where I can find the configuration picked by the customer ?
> Because I need to keep track of this config for further use, and not just
> use it to obtain a total price (as I said to know how to assemble the
> ordered PC for example).
>
> Regards,
>
> Khalil
>
>
>
> BJ Freeman wrote:
> >
> > there has been quite a bit of discussion both on the user and dev lists.
> > some has to do with dealing with the configuration after an order is
> > placed.
> >
> > However the actual ordering process to the creation is covered and
> > works. If you don't have the inventory then it will not run the process
> > and will not put in inventory as a completed item.
> > Remember these configuration are built at the time of the order, to the
> > raw materials must be in inventory.
> >
> > skhalil sent the following on 7/16/2008 10:03 AM:
> >> Hi community,
> >>
> >> I cannot found the detail of a configuration (i.e. options) of a
> >> configurable product in the order. Suppose, I buy a configurable PC, how
> >> can
> >> the backoffice do an assembly of that PC if the chosen configuration is
> >> not
> >> stocked somewhere, or if the user want to cancel an option or modify it
> >> how
> >> can it be done? Also if I want to update an order from the backoffice,
> >> and
> >> add a configurable product, how can I pick my options?
> >>
> >> Thanks & regards,
> >>
> >> Khalil
> >>
> >
> >
> >
>

[BJ Freeman]

you can look
https://demo.hotwaxmedia.com/manufacturing/control/FindProductionRun
10000   Configurable PC-PC assembly   10000   1   Created   2008-07-16
08:54:56.116     WebStoreWarehouse
when you click on 10000
you will have the task, materials and any equipment you will use

skhalil sent the following on 7/16/2008 2:36 PM:

> Thanks for your reply BJ, I understand that the parts must be in stock to
> complete processing the order, but when the order is processed, is there
> somewhere where I can find the configuration picked by the customer ?
> Because I need to keep track of this config for further use, and not just
> use it to obtain a total price (as I said to know how to assemble the
> ordered PC for example).
>
> Regards,
>
> Khalil
>
>
>
> BJ Freeman wrote:
>> there has been quite a bit of discussion both on the user and dev lists.
>> some has to do with dealing with the configuration after an order is
>> placed.
>>
>> However the actual ordering process to the creation is covered and
>> works. If you don't have the inventory then it will not run the process
>> and will not put in inventory as a completed item.
>> Remember these configuration are built at the time of the order, to the
>> raw materials must be in inventory.
>>
>> skhalil sent the following on 7/16/2008 10:03 AM:
>>> Hi community,
>>>
>>> I cannot found the detail of a configuration (i.e. options) of a
>>> configurable product in the order. Suppose, I buy a configurable PC, how
>>> can
>>> the backoffice do an assembly of that PC if the chosen configuration is
>>> not
>>> stocked somewhere, or if the user want to cancel an option or modify it
>>> how
>>> can it be done? Also if I want to update an order from the backoffice,
>>> and
>>> add a configurable product, how can I pick my options?
>>>
>>> Thanks & regards,
>>>
>>> Khalil
>>>
>>
>>
>

[BJ Freeman]

or you can look up the order
https://demo.hotwaxmedia.com/ordermgr/control/searchorders
click on the order #
then click on the Production Run  in the order Item page.

BJ Freeman sent the following on 7/16/2008 4:32 PM:

> you can look
> https://demo.hotwaxmedia.com/manufacturing/control/FindProductionRun
> 10000   Configurable PC-PC assembly   10000   1   Created   2008-07-16
> 08:54:56.116     WebStoreWarehouse
> when you click on 10000
> you will have the task, materials and any equipment you will use
>
> skhalil sent the following on 7/16/2008 2:36 PM:
>> Thanks for your reply BJ, I understand that the parts must be in stock to
>> complete processing the order, but when the order is processed, is there
>> somewhere where I can find the configuration picked by the customer ?
>> Because I need to keep track of this config for further use, and not just
>> use it to obtain a total price (as I said to know how to assemble the
>> ordered PC for example).
>>
>> Regards,
>>
>> Khalil
>>
>>
>>
>> BJ Freeman wrote:
>>> there has been quite a bit of discussion both on the user and dev lists.
>>> some has to do with dealing with the configuration after an order is
>>> placed.
>>>
>>> However the actual ordering process to the creation is covered and
>>> works. If you don't have the inventory then it will not run the process
>>> and will not put in inventory as a completed item.
>>> Remember these configuration are built at the time of the order, to the
>>> raw materials must be in inventory.
>>>
>>> skhalil sent the following on 7/16/2008 10:03 AM:
>>>> Hi community,
>>>>
>>>> I cannot found the detail of a configuration (i.e. options) of a
>>>> configurable product in the order. Suppose, I buy a configurable PC, how
>>>> can
>>>> the backoffice do an assembly of that PC if the chosen configuration is
>>>> not
>>>> stocked somewhere, or if the user want to cancel an option or modify it
>>>> how
>>>> can it be done? Also if I want to update an order from the backoffice,
>>>> and
>>>> add a configurable product, how can I pick my options?
>>>>
>>>> Thanks & regards,
>>>>
>>>> Khalil
>>>>
>>>
>
>
>
>

[Jacques Le Roux]

Hi BJ,

I put a link from FAQ to your page  "Steps to process a Configurable Product"

Thanks

Jacques

From: "BJ Freeman" <[hidden email]>

> or you can look up the order
> https://demo.hotwaxmedia.com/ordermgr/control/searchorders
> click on the order #
> then click on the Production Run  in the order Item page.
>
> BJ Freeman sent the following on 7/16/2008 4:32 PM:
>> you can look
>> https://demo.hotwaxmedia.com/manufacturing/control/FindProductionRun
>> 10000  Configurable PC-PC assembly  10000  1  Created  2008-07-16
>> 08:54:56.116     WebStoreWarehouse
>> when you click on 10000
>> you will have the task, materials and any equipment you will use
>>
>> skhalil sent the following on 7/16/2008 2:36 PM:
>>> Thanks for your reply BJ, I understand that the parts must be in stock to
>>> complete processing the order, but when the order is processed, is there
>>> somewhere where I can find the configuration picked by the customer ?
>>> Because I need to keep track of this config for further use, and not just
>>> use it to obtain a total price (as I said to know how to assemble the
>>> ordered PC for example).
>>>
>>> Regards,
>>>
>>> Khalil
>>>
>>>
>>>
>>> BJ Freeman wrote:
>>>> there has been quite a bit of discussion both on the user and dev lists.
>>>> some has to do with dealing with the configuration after an order is
>>>> placed.
>>>>
>>>> However the actual ordering process to the creation is covered and
>>>> works. If you don't have the inventory then it will not run the process
>>>> and will not put in inventory as a completed item.
>>>> Remember these configuration are built at the time of the order, to the
>>>> raw materials must be in inventory.
>>>>
>>>> skhalil sent the following on 7/16/2008 10:03 AM:
>>>>> Hi community,
>>>>>
>>>>> I cannot found the detail of a configuration (i.e. options) of a
>>>>> configurable product in the order. Suppose, I buy a configurable PC, how
>>>>> can
>>>>> the backoffice do an assembly of that PC if the chosen configuration is
>>>>> not
>>>>> stocked somewhere, or if the user want to cancel an option or modify it
>>>>> how
>>>>> can it be done? Also if I want to update an order from the backoffice,
>>>>> and
>>>>> add a configurable product, how can I pick my options?
>>>>>
>>>>> Thanks & regards,
>>>>>
>>>>> Khalil
>>>>>
>>>>
>>
>>
>>
>>
>

[BJ Freeman]

Glad to help

Jacques Le Roux sent the following on 7/17/2008 1:31 AM:

> Hi BJ,
>
> I put a link from FAQ to your page  "Steps to process a Configurable
> Product"
>
> Thanks
>
> Jacques
>
> From: "BJ Freeman" <[hidden email]>
>> or you can look up the order
>> https://demo.hotwaxmedia.com/ordermgr/control/searchorders
>> click on the order #
>> then click on the Production Run  in the order Item page.
>>
>> BJ Freeman sent the following on 7/16/2008 4:32 PM:
>>> you can look
>>> https://demo.hotwaxmedia.com/manufacturing/control/FindProductionRun
>>> 10000  Configurable PC-PC assembly  10000  1  Created  2008-07-16
>>> 08:54:56.116     WebStoreWarehouse
>>> when you click on 10000
>>> you will have the task, materials and any equipment you will use
>>>
>>> skhalil sent the following on 7/16/2008 2:36 PM:
>>>> Thanks for your reply BJ, I understand that the parts must be in
>>>> stock to
>>>> complete processing the order, but when the order is processed, is
>>>> there
>>>> somewhere where I can find the configuration picked by the customer ?
>>>> Because I need to keep track of this config for further use, and not
>>>> just
>>>> use it to obtain a total price (as I said to know how to assemble the
>>>> ordered PC for example).
>>>>
>>>> Regards,
>>>>
>>>> Khalil
>>>>
>>>>
>>>>
>>>> BJ Freeman wrote:
>>>>> there has been quite a bit of discussion both on the user and dev
>>>>> lists.
>>>>> some has to do with dealing with the configuration after an order is
>>>>> placed.
>>>>>
>>>>> However the actual ordering process to the creation is covered and
>>>>> works. If you don't have the inventory then it will not run the
>>>>> process
>>>>> and will not put in inventory as a completed item.
>>>>> Remember these configuration are built at the time of the order, to
>>>>> the
>>>>> raw materials must be in inventory.
>>>>>
>>>>> skhalil sent the following on 7/16/2008 10:03 AM:
>>>>>> Hi community,
>>>>>>
>>>>>> I cannot found the detail of a configuration (i.e. options) of a
>>>>>> configurable product in the order. Suppose, I buy a configurable
>>>>>> PC, how
>>>>>> can
>>>>>> the backoffice do an assembly of that PC if the chosen
>>>>>> configuration is
>>>>>> not
>>>>>> stocked somewhere, or if the user want to cancel an option or
>>>>>> modify it
>>>>>> how
>>>>>> can it be done? Also if I want to update an order from the
>>>>>> backoffice,
>>>>>> and
>>>>>> add a configurable product, how can I pick my options?
>>>>>>
>>>>>> Thanks & regards,
>>>>>>
>>>>>> Khalil
>>>>>>
>>>>>
>>>
>>>
>>>
>>>
>>
>
>
>