---------------------------------- SETUP A SIMPLE OFBIZ VENDOR BRANCH ---------------------------------- I went through the pain of setting up a "vendor branch" of ofbiz, so I thought I'd share it with the community. The supplied instructions in the wiki seemed confusing, and didn't go into detail. Since I'm into automation, my script (svn_local.sh) allows the following:
Keep a local copy of ofbiz (trunk|0904|1004), allow it to be modified, but at the same time have the ability to receive upstream updates from the Apache Ofbiz SVN server, and merge them into your own local copy. For the most part, this works automatically.
The attached ofbiz_vendor_branch.tar.gz has the script. To clarify, I'm not a subversion expert, so my setup is ultra simple, anonymous read/write, no password, etc. My svn server is safely behind a firewall, so I'm not worried about multi users, passwords, hackers, etc. This works for me because I'm a one man show. Your requirements are probably different.
To get started, we need to keep local copies of the following: http://svn.apache.org/repos/asf/ofbiz/branches/release10.04 --or-- all three!
These are always kept up to date via "svn update", and are kept in /opt/ofbiz.svn. The script (svn_local.sh) allows all three (or more in the future) branches to be tracked. For me, the best branch for deployment is trunk, because it seems to be the most stable, and gets more attention from the developers. For the purpose of this setup, I'm just going focus on trunk, but tracking 0904 or 1004 (or all three) is as easy as tweaking a variable (in svn_local.sh).
The Apache and Local versions are kept in /opt/ofbiz.svn, and are named: /opt/ofbiz.svn/asf.ofbiz.0904 /opt/ofbiz.svn/asf.ofbiz.1004 /opt/ofbiz.svn/asf.ofbiz.trunk
The "local" copies are called. /opt/ofbiz.svn/opt.ofbiz.0904 /opt/ofbiz.svn/opt.ofbiz.1004 /opt/ofbiz.svn/opt.ofbiz.trunk NOTE: Regarding this path (/opt/ofbiz.svn). For simplicity, use the same path (at least initially). The script resides in the "/opt/ofbiz.svn/bin" directory, and will always place the above checked out directories one level above the script (in /opt/ofbiz.svn).
Also, this script runs on an Ubuntu host, I've never tried to run this on windows. However, It might work under cygwin. Internally (within the local SVN repository), the directories are organized like this:
ofbiz/ ofbiz/asf/ ofbiz/asf/ofbiz.1004 ofbiz/asf/ofbiz.trunk ofbiz/opt/ ofbiz/opt/ofbiz.1004 ofbiz/opt/ofbiz.trunk
NOTE: If you already have an SVN repository, then I'd fully analyze/test this process (on a separate machine) to see if it "fits" into your local SVN repository w/o clobbering your own stuff. If you have "ofbiz" at the top of your SVN tree (like above), then there may be issues. You have been warned!
These directories are strictly used to track changes to the local repositories. Your actual names (when you check out a working copy) could be different. In my case, when I check out the working local copy, I place it in /opt/ofbiz.[version], and this is where I actually fire up ofbiz from (later).
You could tweak these names, but this will require hacking the script, and it is not recommended, at least until you understand how it works. The attached tar file contains the following items:
# tar ztvf ofbiz_vendor_branch.tar.gz drwxr-xr-x root/root 0 2011-03-16 10:38 opt/ofbiz.svn/bin/ -rwxr-xr-x root/root 6478 2011-03-16 09:36 opt/ofbiz.svn/bin/svn_local.sh
-rw-r--r-- root/root 9630 2009-05-12 10:25 opt/ofbiz.svn/bin/svn_load_dirs.README -rw-r--r-- root/root 7201 2011-03-16 10:12 opt/ofbiz.svn/bin/config -rw-r--r-- root/root 7201 2011-03-16 10:12 opt/ofbiz.svn/bin/README
-rwxr-xr-x root/root 67335 2010-08-27 18:50 opt/ofbiz.svn/bin/svn_load_dirs.pl -rwxr-xr-x root/root 436 2010-09-06 11:36 opt/ofbiz.svn/bin/svnserv
#
Here are the contents: -------------------------------------------------------------- /opt/ofbiz.svn/bin/svnserv (used to fire up the SVN daemon) /opt/ofbiz.svn/bin/svn_load_dirs.pl (NOT written by me)
/opt/ofbiz.svn/bin/svn_local.sh (MY script, that automates all) /opt/ofbiz.svn/bin/config (SVN client config file, discussed later) /opt/ofbiz.svn/bin/README (These docs) --------------------------------------------------------------
NOTE: The svn_load_dirs.pl (part of Apache) is a perl script which magically merges the various repositories. This one works for me, so I provided it. It DOES require various perl modules that must be satisfied so it properly works.
To get started, you will need your own SVN repository. Here are the steps. -------------------------------------------------------------- STEP 1) Create your own local SVN repository
-------------------------------------------------------------- # mkdir -p /var/svn/repos # svnadmin create /var/svn/repos I suggest you use /var/svn/repos, it will make it easier, and my script uses it (later).
-------------------------------------------------------------- STEP 2) Tweak SVN for anonymous read-write -------------------------------------------------------------- # vi /var/svn/repos/conf/svnserv.conf
[general] anon-access = write auth-access = write password-db = passwd Copy /opt/ofbiz.svn/bin/svnserv into /etc/init.d (unless you don't already have one), and fire up the svnserv init script. You may have to tweak it (works for Ubuntu).
# cp /opt/ofbiz.svn/bin/svnserv /etc/init.d # /etc/init.d/svnserv start Make sure it's running. /# ps -efww|grep svn root 6436 1 0 18:47 ? 00:00:00 svnserve -d -r /var/svn/repos
-------------------------------------------------------------- STEP 3) Copy the client config to the proper location. --------------------------------------------------------------
NOTE: The svn client config needs to be copied to the home directory of the user who runs the svn command. In this case, probably /root/.subversion/config --or-- place it in (again Ubuntu) /etc/subversion/config, which would make it available to all users on that machine. Also, if you plan on running ofbiz on a different machine, then you need to make sure this 'config' file is on all machines. so:
# cp /opt/ofbiz.svn/bin/config /root/.subversion/config --or-- # cp /opt/ofbiz.svn/bin/config /etc/subversion/config --------------------------------------------------------------
STEP 4) Create a "svn" DNS entry for your local domain (optional) -------------------------------------------------------------- If you have your own local area network and your own DNS server, it is good practice to create a "svn" host, which is an alias to the host where the local SVN repository exists. For instance, if your local domain is "internal.net", create "svn.internal.net", which points to the real host.
-------------------------------------------------------------- STEP 5) Untar the attached tar file from the root directory --------------------------------------------------------------
# cd / # tar zxvf /root/download/ofbiz_vendor_branch.tar.gz -------------------------------------------------------------- STEP 6) Configure the script (choose trunk/branches)
-------------------------------------------------------------- # cd /opt/ofbiz.svn/bin # vi svn_local.sh Set the variables ofbiz_versions and local_svnserv. Variable: ofbiz_versions All three Ofbiz versions (NOT recommended) ofbiz_versions="trunk:trunk branches/release10.04:1004 branches/release09.04:0904" Trunk+1004 (also not really recommended) ofbiz_versions="trunk:trunk branches/release10.04:1004" Just Trunk: ofbiz_versions="trunk:trunk" Just 1004: ofbiz_versions="branches/release10.04:1004" The item on the right side of the colon will be used to create the name of the directory entry. For instance, you check out the branch "branches/release10.04" and it create a directory called "opt.ofbiz.1004".
If you choose to track multiple branches (not recommended), then your local SVN server will get pretty fat (and slow). Beware. Variable: local_svnserv
local_svnserv="svn://svn.internal.net" #local_svnserv="svn://svn" #local_svnserv="file:///var/svn/repos" Choose the way you want to access you own local repository. If you followed the above directions, then you already have the svnserv daemon running. The first one is using the DNS name (so is the second, but there is an /etc/resolv.conf that has "search internal.net" defined). This is really the recommended way of accessing a local SVN server. You can then check out the code from ANY machine on your local area network. If you are running on just a single machine, then you COULD use the "file:///..." method, which is fast (and least flexible).
-------------------------------------------------------------- STEP 7) Run the svn_load_dirs.pl utility to make sure it works
--------------------------------------------------------------
# cd /opt/ofbiz.svn/bin # ./svn_load_dirs.pl Look for any perl modules missing, and satisfy the requirements. You should get the help syntax of the script.
On Ubuntu, you can do a bunch of "apt-get install ITEM" to satisfy the perl module, or you could use the CPAN method, which consists of a bunch of: perl -MCPAN -e "install Digest::MD5"
Statements until the script is happy. Don't attempt STEP 8 until svn_load_dirs.pl is happy. ALSO: Check svn_load_dirs.pl and verify line 32:
my $svn = '/usr/bin/svn'; Points to the correct svn binary (above is Ubuntu). # vi svn_load_dirs.pl
-------------------------------------------------------------- STEP 8) Run svn_local.sh in "init" mode --------------------------------------------------------------
NOTE: Don't forget STEP 3 (svn client "config") or you'll have problems with the next step. # cd /opt/ofbiz.svn/bin # ./svn_local.sh init [lots of output]
NOTE: This is only done ONCE (with "init"), to initially populate the repository. The script is in debug mode (during init) in case any problems occur. -------------------------------------------------------------- STEP 9) Checkout the "local" (running) branch of the ofbiz repository you want --------------------------------------------------------------
Decide where you want to run ofbiz. /opt always works for me. # trunk example # cd /opt # svn co svn://SVN_SERVER/ofbiz/opt/ofbiz.trunk/trunk/ ofbiz.trunk --or--
# svn co file:///var/svn/repos/ofbiz/opt/ofbiz.trunk/trunk/ ofbiz.trunk NOTE: The right argument is the directory that will be created. You can name it anything you want. I recommend ofbiz.[trunk|branch] to match SVN.
# 10.04 example # cd /opt # svn co svn://SVN_SERVER/ofbiz/opt/ofbiz.1004/trunk/ ofbiz.1004 --or-- # svn co file:///var/svn/repos/ofbiz/opt/ofbiz.1004/trunk/ ofbiz.1004
.... A ofbiz.trunk/ivy.xml A ofbiz.trunk/startofbizBoth.bat A ofbiz.trunk/KEYS A ofbiz.trunk/rc.ofbiz A ofbiz.trunk/startofbizPos.bat Checked out revision 11.
# Notice that even for 1004, you still checkout the "trunk" of the local 1004 repository --------------------------------------------------------------
STEP 10) Check things out, test, etc. -------------------------------------------------------------- Change directory, and run "svn info" You should see a low revision #, like 11.
# cd /opt/ofbiz.trunk; svn info; svn log The "Last Changed Rev:" is probably r11. The log should show "Initial import...." --------------------------------------------------------------
STEP 11) Change something, commit changes to your local repository -------------------------------------------------------------- # cd /opt/ofbiz.trunk/hot-deploy # mkdir newapp
# svn add newapp A newapp # svn commit -------------------------------------------------------------- This is a newapp in hot-deploy --This line, and those below, will be ignored--
A hot-deploy/newapp -------------------------------------------------------------- Adding hot-deploy/newapp Committed revision 12. -------------------------------------------------------------- STEP 12) Run updates from Apache OFBIZ, and "merge" changes into your local repo. --------------------------------------------------------------
Sometime later, after the developers tweaked something in trunk, run the following: # cd /opt/ofbiz.svn/bin # ./svn_local.sh If nothing changed, then you'll see:
-------------------------------------------------------------- NOTE: FOUND svn_load_dirs.pl in [/opt/ofbiz.svn/bin/svn_load_dirs.pl]
Remote ASF: http://svn.apache.org/repos/asf/ofbiz/trunk Local ASF: svn://svn/ofbiz/asf/ofbiz.trunk Local OFB: svn://svn/ofbiz/opt/ofbiz.trunk
http://svn.apache.org/repos/asf/ofbiz/trunk Revision: 1082281 Last Changed Revisions: Last:1082281 Current:1082281
Repository revisions match
# -------------------------------------------------------------- Otherwise, you'll lots of magical output that hopefully ends up with your local svn repository opt.ofbiz.[trunk|branch] updated with fresh patches/changes from Ofbiz being merged into your own changes being made locally.
This works automatically for the most part, but on occasion you may have a collision when you might have to accept/reject a merge option. The script also creates directories like this:
/opt/ofbiz.svn/asf.ofbiz.trunk.1079456 /opt/ofbiz.svn/asf.ofbiz.trunk.1080107 /opt/ofbiz.svn/asf.ofbiz.trunk.1080776 /opt/ofbiz.svn/asf.ofbiz.trunk.1081185 Which are checked out versions of trunk. These can be blown away if you like, but I like them because I can do stuff like "diffing" between revisions: diff -r asf.ofbiz.trunk.1081444 asf.ofbiz.trunk.1081740
-------------------------------------------------------------- STEP 13) Update your local (running) copy of ofbiz with the latest changes. --------------------------------------------------------------
Suppose you (like me) run the "running" version of ofbiz in /opt/ofbiz.trunk, which you checked out in STEP 9. You run the update/merge process: # cd /opt/ofbiz.svn/bin
# ./svn_local.sh [lots of output] Even though you did the above steps, the copy you are running in /opt/ofbiz.trunk is STILL running the old code. You must also update your running (checked out) code, like this:
# cd /opt/ofbiz.trunk # svn update ....... update statements ............ /etc/init.d/ofbiz.trunk restart ... etc.. Thats it. If you have problems initially creating the repository, make sure you followed STEP #3. You can always blow away the /var/svn/repos, and re-init.
If any errors show up, you can always un-comment line #6 "set -x" to show the debug steps. If you already have a modified ofbiz directory that you want to merge into this process, then that will be tricky, and a lot more work. However, you could probably do it like this:
Run the above procedure, checking out a new code branch (like in STEP 9). You then need to detect the changes between your existing, running code and copy each modified (or missing) file/directory (i.e., one by one into the checked out directory (/opt/ofbiz.trunk). Then, just:
# cd /opt/ofbiz.trunk # svn commit I hope this helps someone. Good luck!! ofbiz_vendor_branch.tgz (37K) Download Attachment |
Hi Mike,
I did not verify anything, but could you please post your message as a comment in https://cwiki.apache.org/confluence/display/OFBIZ/SVN+Tips+-+svn_load_dirs+Vendor+Branch You can also put your attachment there Thanks Jacques ----- Original Message ----- From: Mike To: [hidden email] Sent: Thursday, March 17, 2011 8:19 AM Subject: How to setup a simple ofbiz vendor branch ---------------------------------- SETUP A SIMPLE OFBIZ VENDOR BRANCH ---------------------------------- I went through the pain of setting up a "vendor branch" of ofbiz, so I thought I'd share it with the community. The supplied instructions in the wiki seemed confusing, and didn't go into detail. Since I'm into automation, my script (svn_local.sh) allows the following: Keep a local copy of ofbiz (trunk|0904|1004), allow it to be modified, but at the same time have the ability to receive upstream updates from the Apache Ofbiz SVN server, and merge them into your own local copy. For the most part, this works automatically. The attached ofbiz_vendor_branch.tar.gz has the script. To clarify, I'm not a subversion expert, so my setup is ultra simple, anonymous read/write, no password, etc. My svn server is safely behind a firewall, so I'm not worried about multi users, passwords, hackers, etc. This works for me because I'm a one man show. Your requirements are probably different. To get started, we need to keep local copies of the following: http://svn.apache.org/repos/asf/ofbiz/trunk --or-- http://svn.apache.org/repos/asf/ofbiz/branches/release09.04 --or-- http://svn.apache.org/repos/asf/ofbiz/branches/release10.04 --or-- all three! These are always kept up to date via "svn update", and are kept in /opt/ofbiz.svn. The script (svn_local.sh) allows all three (or more in the future) branches to be tracked. For me, the best branch for deployment is trunk, because it seems to be the most stable, and gets more attention from the developers. For the purpose of this setup, I'm just going focus on trunk, but tracking 0904 or 1004 (or all three) is as easy as tweaking a variable (in svn_local.sh). The Apache and Local versions are kept in /opt/ofbiz.svn, and are named: /opt/ofbiz.svn/asf.ofbiz.0904 /opt/ofbiz.svn/asf.ofbiz.1004 /opt/ofbiz.svn/asf.ofbiz.trunk The "local" copies are called. /opt/ofbiz.svn/opt.ofbiz.0904 /opt/ofbiz.svn/opt.ofbiz.1004 /opt/ofbiz.svn/opt.ofbiz.trunk NOTE: Regarding this path (/opt/ofbiz.svn). For simplicity, use the same path (at least initially). The script resides in the "/opt/ofbiz.svn/bin" directory, and will always place the above checked out directories one level above the script (in /opt/ofbiz.svn). Also, this script runs on an Ubuntu host, I've never tried to run this on windows. However, It might work under cygwin. Internally (within the local SVN repository), the directories are organized like this: ofbiz/ ofbiz/asf/ ofbiz/asf/ofbiz.1004 ofbiz/asf/ofbiz.trunk ofbiz/opt/ ofbiz/opt/ofbiz.1004 ofbiz/opt/ofbiz.trunk NOTE: If you already have an SVN repository, then I'd fully analyze/test this process (on a separate machine) to see if it "fits" into your local SVN repository w/o clobbering your own stuff. If you have "ofbiz" at the top of your SVN tree (like above), then there may be issues. You have been warned! These directories are strictly used to track changes to the local repositories. Your actual names (when you check out a working copy) could be different. In my case, when I check out the working local copy, I place it in /opt/ofbiz.[version], and this is where I actually fire up ofbiz from (later). You could tweak these names, but this will require hacking the script, and it is not recommended, at least until you understand how it works. The attached tar file contains the following items: # tar ztvf ofbiz_vendor_branch.tar.gz drwxr-xr-x root/root 0 2011-03-16 10:38 opt/ofbiz.svn/bin/ -rwxr-xr-x root/root 6478 2011-03-16 09:36 opt/ofbiz.svn/bin/svn_local.sh -rw-r--r-- root/root 9630 2009-05-12 10:25 opt/ofbiz.svn/bin/svn_load_dirs.README -rw-r--r-- root/root 7201 2011-03-16 10:12 opt/ofbiz.svn/bin/config -rw-r--r-- root/root 7201 2011-03-16 10:12 opt/ofbiz.svn/bin/README -rwxr-xr-x root/root 67335 2010-08-27 18:50 opt/ofbiz.svn/bin/svn_load_dirs.pl -rwxr-xr-x root/root 436 2010-09-06 11:36 opt/ofbiz.svn/bin/svnserv # Here are the contents: -------------------------------------------------------------- /opt/ofbiz.svn/bin/svnserv (used to fire up the SVN daemon) /opt/ofbiz.svn/bin/svn_load_dirs.pl (NOT written by me) /opt/ofbiz.svn/bin/svn_local.sh (MY script, that automates all) /opt/ofbiz.svn/bin/config (SVN client config file, discussed later) /opt/ofbiz.svn/bin/README (These docs) -------------------------------------------------------------- NOTE: The svn_load_dirs.pl (part of Apache) is a perl script which magically merges the various repositories. This one works for me, so I provided it. It DOES require various perl modules that must be satisfied so it properly works. To get started, you will need your own SVN repository. Here are the steps. -------------------------------------------------------------- STEP 1) Create your own local SVN repository -------------------------------------------------------------- # mkdir -p /var/svn/repos # svnadmin create /var/svn/repos I suggest you use /var/svn/repos, it will make it easier, and my script uses it (later). -------------------------------------------------------------- STEP 2) Tweak SVN for anonymous read-write -------------------------------------------------------------- # vi /var/svn/repos/conf/svnserv.conf [general] anon-access = write auth-access = write password-db = passwd Copy /opt/ofbiz.svn/bin/svnserv into /etc/init.d (unless you don't already have one), and fire up the svnserv init script. You may have to tweak it (works for Ubuntu). # cp /opt/ofbiz.svn/bin/svnserv /etc/init.d # /etc/init.d/svnserv start Make sure it's running. /# ps -efww|grep svn root 6436 1 0 18:47 ? 00:00:00 svnserve -d -r /var/svn/repos -------------------------------------------------------------- STEP 3) Copy the client config to the proper location. -------------------------------------------------------------- NOTE: The svn client config needs to be copied to the home directory of the user who runs the svn command. In this case, probably /root/.subversion/config --or-- place it in (again Ubuntu) /etc/subversion/config, which would make it available to all users on that machine. Also, if you plan on running ofbiz on a different machine, then you need to make sure this 'config' file is on all machines. so: # cp /opt/ofbiz.svn/bin/config /root/.subversion/config --or-- # cp /opt/ofbiz.svn/bin/config /etc/subversion/config -------------------------------------------------------------- STEP 4) Create a "svn" DNS entry for your local domain (optional) -------------------------------------------------------------- If you have your own local area network and your own DNS server, it is good practice to create a "svn" host, which is an alias to the host where the local SVN repository exists. For instance, if your local domain is "internal.net", create "svn.internal.net", which points to the real host. -------------------------------------------------------------- STEP 5) Untar the attached tar file from the root directory -------------------------------------------------------------- # cd / # tar zxvf /root/download/ofbiz_vendor_branch.tar.gz -------------------------------------------------------------- STEP 6) Configure the script (choose trunk/branches) -------------------------------------------------------------- # cd /opt/ofbiz.svn/bin # vi svn_local.sh Set the variables ofbiz_versions and local_svnserv. Variable: ofbiz_versions All three Ofbiz versions (NOT recommended) ofbiz_versions="trunk:trunk branches/release10.04:1004 branches/release09.04:0904" Trunk+1004 (also not really recommended) ofbiz_versions="trunk:trunk branches/release10.04:1004" Just Trunk: ofbiz_versions="trunk:trunk" Just 1004: ofbiz_versions="branches/release10.04:1004" The item on the right side of the colon will be used to create the name of the directory entry. For instance, you check out the branch "branches/release10.04" and it create a directory called "opt.ofbiz.1004". If you choose to track multiple branches (not recommended), then your local SVN server will get pretty fat (and slow). Beware. Variable: local_svnserv local_svnserv="svn://svn.internal.net" #local_svnserv="svn://svn" #local_svnserv="file:///var/svn/repos" Choose the way you want to access you own local repository. If you followed the above directions, then you already have the svnserv daemon running. The first one is using the DNS name (so is the second, but there is an /etc/resolv.conf that has "search internal.net" defined). This is really the recommended way of accessing a local SVN server. You can then check out the code from ANY machine on your local area network. If you are running on just a single machine, then you COULD use the "file:///..." method, which is fast (and least flexible). -------------------------------------------------------------- STEP 7) Run the svn_load_dirs.pl utility to make sure it works -------------------------------------------------------------- # cd /opt/ofbiz.svn/bin # ./svn_load_dirs.pl Look for any perl modules missing, and satisfy the requirements. You should get the help syntax of the script. On Ubuntu, you can do a bunch of "apt-get install ITEM" to satisfy the perl module, or you could use the CPAN method, which consists of a bunch of: perl -MCPAN -e "install Digest::MD5" Statements until the script is happy. Don't attempt STEP 8 until svn_load_dirs.pl is happy. ALSO: Check svn_load_dirs.pl and verify line 32: my $svn = '/usr/bin/svn'; Points to the correct svn binary (above is Ubuntu). # vi svn_load_dirs.pl -------------------------------------------------------------- STEP 8) Run svn_local.sh in "init" mode -------------------------------------------------------------- NOTE: Don't forget STEP 3 (svn client "config") or you'll have problems with the next step. # cd /opt/ofbiz.svn/bin # ./svn_local.sh init [lots of output] NOTE: This is only done ONCE (with "init"), to initially populate the repository. The script is in debug mode (during init) in case any problems occur. -------------------------------------------------------------- STEP 9) Checkout the "local" (running) branch of the ofbiz repository you want -------------------------------------------------------------- Decide where you want to run ofbiz. /opt always works for me. # trunk example # cd /opt # svn co svn://SVN_SERVER/ofbiz/opt/ofbiz.trunk/trunk/ ofbiz.trunk --or-- # svn co file:///var/svn/repos/ofbiz/opt/ofbiz.trunk/trunk/ ofbiz.trunk NOTE: The right argument is the directory that will be created. You can name it anything you want. I recommend ofbiz.[trunk|branch] to match SVN. # 10.04 example # cd /opt # svn co svn://SVN_SERVER/ofbiz/opt/ofbiz.1004/trunk/ ofbiz.1004 --or-- # svn co file:///var/svn/repos/ofbiz/opt/ofbiz.1004/trunk/ ofbiz.1004 .... A ofbiz.trunk/ivy.xml A ofbiz.trunk/startofbizBoth.bat A ofbiz.trunk/KEYS A ofbiz.trunk/rc.ofbiz A ofbiz.trunk/startofbizPos.bat Checked out revision 11. # Notice that even for 1004, you still checkout the "trunk" of the local 1004 repository -------------------------------------------------------------- STEP 10) Check things out, test, etc. -------------------------------------------------------------- Change directory, and run "svn info" You should see a low revision #, like 11. # cd /opt/ofbiz.trunk; svn info; svn log The "Last Changed Rev:" is probably r11. The log should show "Initial import...." -------------------------------------------------------------- STEP 11) Change something, commit changes to your local repository -------------------------------------------------------------- # cd /opt/ofbiz.trunk/hot-deploy # mkdir newapp # svn add newapp A newapp # svn commit -------------------------------------------------------------- This is a newapp in hot-deploy --This line, and those below, will be ignored-- A hot-deploy/newapp -------------------------------------------------------------- Adding hot-deploy/newapp Committed revision 12. -------------------------------------------------------------- STEP 12) Run updates from Apache OFBIZ, and "merge" changes into your local repo. -------------------------------------------------------------- Sometime later, after the developers tweaked something in trunk, run the following: # cd /opt/ofbiz.svn/bin # ./svn_local.sh If nothing changed, then you'll see: -------------------------------------------------------------- NOTE: FOUND svn_load_dirs.pl in [/opt/ofbiz.svn/bin/svn_load_dirs.pl] Remote ASF: http://svn.apache.org/repos/asf/ofbiz/trunk Local ASF: svn://svn/ofbiz/asf/ofbiz.trunk Local OFB: svn://svn/ofbiz/opt/ofbiz.trunk http://svn.apache.org/repos/asf/ofbiz/trunk Revision: 1082281 Last Changed Revisions: Last:1082281 Current:1082281 Repository revisions match # -------------------------------------------------------------- Otherwise, you'll lots of magical output that hopefully ends up with your local svn repository opt.ofbiz.[trunk|branch] updated with fresh patches/changes from Ofbiz being merged into your own changes being made locally. This works automatically for the most part, but on occasion you may have a collision when you might have to accept/reject a merge option. The script also creates directories like this: /opt/ofbiz.svn/asf.ofbiz.trunk.1079456 /opt/ofbiz.svn/asf.ofbiz.trunk.1080107 /opt/ofbiz.svn/asf.ofbiz.trunk.1080776 /opt/ofbiz.svn/asf.ofbiz.trunk.1081185 Which are checked out versions of trunk. These can be blown away if you like, but I like them because I can do stuff like "diffing" between revisions: diff -r asf.ofbiz.trunk.1081444 asf.ofbiz.trunk.1081740 -------------------------------------------------------------- STEP 13) Update your local (running) copy of ofbiz with the latest changes. -------------------------------------------------------------- Suppose you (like me) run the "running" version of ofbiz in /opt/ofbiz.trunk, which you checked out in STEP 9. You run the update/merge process: # cd /opt/ofbiz.svn/bin # ./svn_local.sh [lots of output] Even though you did the above steps, the copy you are running in /opt/ofbiz.trunk is STILL running the old code. You must also update your running (checked out) code, like this: # cd /opt/ofbiz.trunk # svn update ....... update statements ............ /etc/init.d/ofbiz.trunk restart ... etc.. Thats it. If you have problems initially creating the repository, make sure you followed STEP #3. You can always blow away the /var/svn/repos, and re-init. If any errors show up, you can always un-comment line #6 "set -x" to show the debug steps. If you already have a modified ofbiz directory that you want to merge into this process, then that will be tricky, and a lot more work. However, you could probably do it like this: Run the above procedure, checking out a new code branch (like in STEP 9). You then need to detect the changes between your existing, running code and copy each modified (or missing) file/directory (i.e., one by one into the checked out directory (/opt/ofbiz.trunk). Then, just: # cd /opt/ofbiz.trunk # svn commit I hope this helps someone. Good luck!! |
Done. I hope someone gives it a try. I just ran it this morning, and
it detected the following changes (since last night) and merged then into my local trunk: # cd /opt/ofbiz.svn/bin # ./svn_local.sh [update output] ...... Updating opt.ofbiz.trunk Merging Revisions: Last:1082417 Current:1082582 --- Merging differences between repository URLs into 'opt.ofbiz.trunk': U opt.ofbiz.trunk/themes/tomahawk/webapp/tomahawk/css/help.css U opt.ofbiz.trunk/applications/accounting/src/org/ofbiz/accounting/invoice/InvoiceServices.java U opt.ofbiz.trunk/applications/accounting/data/AccountingTypeData.xml U opt.ofbiz.trunk/framework/sql/src/org/ofbiz/sql/Planner.java Commiting Local Merged Revisions: Last:1082417 Current:1082582 Sending . Sending applications/accounting/data/AccountingTypeData.xml Sending applications/accounting/src/org/ofbiz/accounting/invoice/InvoiceServices.java Sending framework/sql/src/org/ofbiz/sql/Planner.java Sending themes/tomahawk/webapp/tomahawk/css/help.css Transmitting file data .... Committed revision 338. Easy..... On Thu, Mar 17, 2011 at 12:46 AM, Jacques Le Roux <[hidden email]> wrote: > Hi Mike, > > I did not verify anything, but could you please post your message as a comment in https://cwiki.apache.org/confluence/display/OFBIZ/SVN+Tips+-+svn_load_dirs+Vendor+Branch > You can also put your attachment there > > Thanks > > Jacques > ----- Original Message ----- > From: Mike > To: [hidden email] > Sent: Thursday, March 17, 2011 8:19 AM > Subject: How to setup a simple ofbiz vendor branch > > > ---------------------------------- > SETUP A SIMPLE OFBIZ VENDOR BRANCH > ---------------------------------- > > > I went through the pain of setting up a "vendor branch" of ofbiz, so I thought I'd share it with the community. The supplied instructions in the wiki seemed confusing, and didn't go into detail. Since I'm into automation, my script (svn_local.sh) allows the following: > > > Keep a local copy of ofbiz (trunk|0904|1004), allow it to be modified, but at the same time have the ability to receive upstream updates from the Apache Ofbiz SVN server, and merge them into your own local copy. For the most part, this works automatically. > > > The attached ofbiz_vendor_branch.tar.gz has the script. > > > To clarify, I'm not a subversion expert, so my setup is ultra simple, anonymous read/write, no password, etc. My svn server is safely behind a firewall, so I'm not worried about multi users, passwords, hackers, etc. This works for me because I'm a one man show. Your requirements are probably different. > > > To get started, we need to keep local copies of the following: > > > http://svn.apache.org/repos/asf/ofbiz/trunk --or-- > http://svn.apache.org/repos/asf/ofbiz/branches/release09.04 --or-- > http://svn.apache.org/repos/asf/ofbiz/branches/release10.04 --or-- all three! > > > These are always kept up to date via "svn update", and are kept in /opt/ofbiz.svn. > > > The script (svn_local.sh) allows all three (or more in the future) branches to be tracked. For me, the best branch for deployment is trunk, because it seems to be the most stable, and gets more attention from the developers. For the purpose of this setup, I'm just going focus on trunk, but tracking 0904 or 1004 (or all three) is as easy as tweaking a variable (in svn_local.sh). > > > The Apache and Local versions are kept in /opt/ofbiz.svn, and are named: > > > /opt/ofbiz.svn/asf.ofbiz.0904 > /opt/ofbiz.svn/asf.ofbiz.1004 > /opt/ofbiz.svn/asf.ofbiz.trunk > > > The "local" copies are called. > /opt/ofbiz.svn/opt.ofbiz.0904 > /opt/ofbiz.svn/opt.ofbiz.1004 > /opt/ofbiz.svn/opt.ofbiz.trunk > > > NOTE: Regarding this path (/opt/ofbiz.svn). For simplicity, use the same path (at least initially). The script resides in the "/opt/ofbiz.svn/bin" directory, and will always place the above checked out directories one level above the script (in /opt/ofbiz.svn). > > > Also, this script runs on an Ubuntu host, I've never tried to run this on windows. However, It might work under cygwin. > > > Internally (within the local SVN repository), the directories are organized like this: > > > ofbiz/ > ofbiz/asf/ > ofbiz/asf/ofbiz.1004 > ofbiz/asf/ofbiz.trunk > ofbiz/opt/ > ofbiz/opt/ofbiz.1004 > ofbiz/opt/ofbiz.trunk > > > NOTE: If you already have an SVN repository, then I'd fully analyze/test this process (on a separate machine) to see if it "fits" into your local SVN repository w/o clobbering your own stuff. If you have "ofbiz" at the top of your SVN tree (like above), then there may be issues. You have been warned! > > > These directories are strictly used to track changes to the local repositories. Your actual names (when you check out a working copy) could be different. In my case, when I check out the working local copy, I place it in /opt/ofbiz.[version], and this is where I actually fire up ofbiz from (later). > > > You could tweak these names, but this will require hacking the script, and it is not recommended, at least until you understand how it works. > > > The attached tar file contains the following items: > > > # tar ztvf ofbiz_vendor_branch.tar.gz > drwxr-xr-x root/root 0 2011-03-16 10:38 opt/ofbiz.svn/bin/ > -rwxr-xr-x root/root 6478 2011-03-16 09:36 opt/ofbiz.svn/bin/svn_local.sh > -rw-r--r-- root/root 9630 2009-05-12 10:25 opt/ofbiz.svn/bin/svn_load_dirs.README > -rw-r--r-- root/root 7201 2011-03-16 10:12 opt/ofbiz.svn/bin/config > -rw-r--r-- root/root 7201 2011-03-16 10:12 opt/ofbiz.svn/bin/README > -rwxr-xr-x root/root 67335 2010-08-27 18:50 opt/ofbiz.svn/bin/svn_load_dirs.pl > -rwxr-xr-x root/root 436 2010-09-06 11:36 opt/ofbiz.svn/bin/svnserv > # > > > Here are the contents: > -------------------------------------------------------------- > /opt/ofbiz.svn/bin/svnserv (used to fire up the SVN daemon) > /opt/ofbiz.svn/bin/svn_load_dirs.pl (NOT written by me) > /opt/ofbiz.svn/bin/svn_local.sh (MY script, that automates all) > /opt/ofbiz.svn/bin/config (SVN client config file, discussed later) > /opt/ofbiz.svn/bin/README (These docs) > -------------------------------------------------------------- > > > NOTE: The svn_load_dirs.pl (part of Apache) is a perl script which magically merges the various repositories. This one works for me, so I provided it. It DOES require various perl modules that must be satisfied so it properly works. > > > To get started, you will need your own SVN repository. Here are the steps. > > > -------------------------------------------------------------- > STEP 1) Create your own local SVN repository > -------------------------------------------------------------- > # mkdir -p /var/svn/repos > # svnadmin create /var/svn/repos > > > I suggest you use /var/svn/repos, it will make it easier, and my script uses it (later). > > > -------------------------------------------------------------- > STEP 2) Tweak SVN for anonymous read-write > -------------------------------------------------------------- > # vi /var/svn/repos/conf/svnserv.conf > > > [general] > anon-access = write > auth-access = write > password-db = passwd > > > Copy /opt/ofbiz.svn/bin/svnserv into /etc/init.d (unless you don't already have one), and fire up the svnserv init script. You may have to tweak it (works for Ubuntu). > > > # cp /opt/ofbiz.svn/bin/svnserv /etc/init.d > # /etc/init.d/svnserv start > > > Make sure it's running. > > > /# ps -efww|grep svn > root 6436 1 0 18:47 ? 00:00:00 svnserve -d -r /var/svn/repos > > > -------------------------------------------------------------- > STEP 3) Copy the client config to the proper location. > -------------------------------------------------------------- > NOTE: The svn client config needs to be copied to the home directory of the user who runs the svn command. In this case, probably /root/.subversion/config --or-- place it in (again Ubuntu) /etc/subversion/config, which would make it available to all users on that machine. Also, if you plan on running ofbiz on a different machine, then you need to make sure this 'config' file is on all machines. so: > > > # cp /opt/ofbiz.svn/bin/config /root/.subversion/config --or-- > # cp /opt/ofbiz.svn/bin/config /etc/subversion/config > > > -------------------------------------------------------------- > STEP 4) Create a "svn" DNS entry for your local domain (optional) > -------------------------------------------------------------- > If you have your own local area network and your own DNS server, it is good practice to create a "svn" host, which is an alias to the host where the local SVN repository exists. For instance, if your local domain is "internal.net", create "svn.internal.net", which points to the real host. > > > -------------------------------------------------------------- > STEP 5) Untar the attached tar file from the root directory > -------------------------------------------------------------- > # cd / > # tar zxvf /root/download/ofbiz_vendor_branch.tar.gz > > > -------------------------------------------------------------- > STEP 6) Configure the script (choose trunk/branches) > -------------------------------------------------------------- > # cd /opt/ofbiz.svn/bin > # vi svn_local.sh > > > Set the variables ofbiz_versions and local_svnserv. > > > Variable: ofbiz_versions > > > All three Ofbiz versions (NOT recommended) > ofbiz_versions="trunk:trunk branches/release10.04:1004 branches/release09.04:0904" > > > Trunk+1004 (also not really recommended) > ofbiz_versions="trunk:trunk branches/release10.04:1004" > > > Just Trunk: > ofbiz_versions="trunk:trunk" > > > Just 1004: > ofbiz_versions="branches/release10.04:1004" > > > The item on the right side of the colon will be used to create the name of the directory entry. For instance, you check out the branch "branches/release10.04" and it create a directory called "opt.ofbiz.1004". > > > If you choose to track multiple branches (not recommended), then your local SVN server will get pretty fat (and slow). Beware. > > > Variable: local_svnserv > > > local_svnserv="svn://svn.internal.net" > #local_svnserv="svn://svn" > #local_svnserv="file:///var/svn/repos" > > > Choose the way you want to access you own local repository. If you followed the above directions, then you already have the svnserv daemon running. The first one is using the DNS name (so is the second, but there is an /etc/resolv.conf that has "search internal.net" defined). This is really the recommended way of accessing a local SVN server. You can then check out the code from ANY machine on your local area network. If you are running on just a single machine, then you COULD use the "file:///..." method, which is fast (and least flexible). > > > -------------------------------------------------------------- > STEP 7) Run the svn_load_dirs.pl utility to make sure it works > -------------------------------------------------------------- > # cd /opt/ofbiz.svn/bin > # ./svn_load_dirs.pl > > > Look for any perl modules missing, and satisfy the requirements. You should get the help syntax of the script. > > > On Ubuntu, you can do a bunch of "apt-get install ITEM" to satisfy the perl module, or you could use the CPAN method, which consists of a bunch of: > > > perl -MCPAN -e "install Digest::MD5" > > > Statements until the script is happy. Don't attempt STEP 8 until svn_load_dirs.pl is happy. > > > ALSO: Check svn_load_dirs.pl and verify line 32: > > > my $svn = '/usr/bin/svn'; > > > Points to the correct svn binary (above is Ubuntu). > > > # vi svn_load_dirs.pl > > > -------------------------------------------------------------- > STEP 8) Run svn_local.sh in "init" mode > -------------------------------------------------------------- > NOTE: Don't forget STEP 3 (svn client "config") or you'll have problems with the next step. > > > # cd /opt/ofbiz.svn/bin > # ./svn_local.sh init > [lots of output] > > > NOTE: This is only done ONCE (with "init"), to initially populate the repository. > > > The script is in debug mode (during init) in case any problems occur. > > > -------------------------------------------------------------- > STEP 9) Checkout the "local" (running) branch of the ofbiz repository you want > -------------------------------------------------------------- > Decide where you want to run ofbiz. /opt always works for me. > > > # trunk example > # cd /opt > # svn co svn://SVN_SERVER/ofbiz/opt/ofbiz.trunk/trunk/ ofbiz.trunk --or-- > # svn co file:///var/svn/repos/ofbiz/opt/ofbiz.trunk/trunk/ ofbiz.trunk > > > NOTE: The right argument is the directory that will be created. You can name it > anything you want. I recommend ofbiz.[trunk|branch] to match SVN. > > > # 10.04 example > # cd /opt > # svn co svn://SVN_SERVER/ofbiz/opt/ofbiz.1004/trunk/ ofbiz.1004 --or-- > # svn co file:///var/svn/repos/ofbiz/opt/ofbiz.1004/trunk/ ofbiz.1004 > .... > A ofbiz.trunk/ivy.xml > A ofbiz.trunk/startofbizBoth.bat > A ofbiz.trunk/KEYS > A ofbiz.trunk/rc.ofbiz > A ofbiz.trunk/startofbizPos.bat > Checked out revision 11. > # > > > Notice that even for 1004, you still checkout the "trunk" of the local 1004 repository > > > -------------------------------------------------------------- > STEP 10) Check things out, test, etc. > -------------------------------------------------------------- > Change directory, and run "svn info" You should see a low revision #, like 11. > > > # cd /opt/ofbiz.trunk; svn info; svn log > > > The "Last Changed Rev:" is probably r11. The log should show "Initial import...." > > > -------------------------------------------------------------- > STEP 11) Change something, commit changes to your local repository > -------------------------------------------------------------- > # cd /opt/ofbiz.trunk/hot-deploy > # mkdir newapp > # svn add newapp > A newapp > # svn commit > -------------------------------------------------------------- > This is a newapp in hot-deploy > --This line, and those below, will be ignored-- > > > A hot-deploy/newapp > -------------------------------------------------------------- > Adding hot-deploy/newapp > > > Committed revision 12. > > > -------------------------------------------------------------- > STEP 12) Run updates from Apache OFBIZ, and "merge" changes into your local repo. > -------------------------------------------------------------- > Sometime later, after the developers tweaked something in trunk, run the following: > > > # cd /opt/ofbiz.svn/bin > # ./svn_local.sh > > > If nothing changed, then you'll see: > -------------------------------------------------------------- > NOTE: FOUND svn_load_dirs.pl in [/opt/ofbiz.svn/bin/svn_load_dirs.pl] > Remote ASF: http://svn.apache.org/repos/asf/ofbiz/trunk > Local ASF: svn://svn/ofbiz/asf/ofbiz.trunk > Local OFB: svn://svn/ofbiz/opt/ofbiz.trunk > > > http://svn.apache.org/repos/asf/ofbiz/trunk Revision: 1082281 > Last Changed Revisions: Last:1082281 Current:1082281 > Repository revisions match > # > -------------------------------------------------------------- > Otherwise, you'll lots of magical output that hopefully ends up with your local svn repository opt.ofbiz.[trunk|branch] updated with fresh patches/changes from Ofbiz being merged into your own changes being made locally. > > > This works automatically for the most part, but on occasion you may have a collision when you might have to accept/reject a merge option. > > > The script also creates directories like this: > > > /opt/ofbiz.svn/asf.ofbiz.trunk.1079456 > /opt/ofbiz.svn/asf.ofbiz.trunk.1080107 > /opt/ofbiz.svn/asf.ofbiz.trunk.1080776 > /opt/ofbiz.svn/asf.ofbiz.trunk.1081185 > > > Which are checked out versions of trunk. These can be blown away if you like, but I like them because I can do stuff like "diffing" between revisions: > > > diff -r asf.ofbiz.trunk.1081444 asf.ofbiz.trunk.1081740 > > > -------------------------------------------------------------- > STEP 13) Update your local (running) copy of ofbiz with the latest changes. > -------------------------------------------------------------- > Suppose you (like me) run the "running" version of ofbiz in /opt/ofbiz.trunk, which you checked out in STEP 9. > > > You run the update/merge process: > > > # cd /opt/ofbiz.svn/bin > # ./svn_local.sh > [lots of output] > > > Even though you did the above steps, the copy you are running in /opt/ofbiz.trunk is STILL running the old code. You must also update your running (checked out) code, like this: > > > # cd /opt/ofbiz.trunk > # svn update > ....... update statements ............ > > > /etc/init.d/ofbiz.trunk restart ... etc.. > > > Thats it. If you have problems initially creating the repository, make sure you followed STEP #3. You can always blow away the /var/svn/repos, and re-init. > > > If any errors show up, you can always un-comment line #6 "set -x" to show the debug steps. > > > If you already have a modified ofbiz directory that you want to merge into this process, then that will be tricky, and a lot more work. However, you could probably do it like this: > > > Run the above procedure, checking out a new code branch (like in STEP 9). You then need to detect the changes between your existing, running code and copy each modified (or missing) file/directory (i.e., one by one into the checked out directory (/opt/ofbiz.trunk). Then, just: > > > # cd /opt/ofbiz.trunk > # svn commit > > > I hope this helps someone. Good luck!! > > |
Free forum by Nabble | Edit this page |