New Catalog not getting display in the list
Locked
12
12
Re: New Catalog not getting display in the list
 
|
acceptable fix
thanks ========================= BJ Freeman Strategic Power Office with Supplier Automation <http://www.businessesnetwork.com/automation/viewforum.php?f=52> Specialtymarket.com <http://www.specialtymarket.com/> Systems Integrator-- Glad to Assist Chat Y! messenger: bjfr33man Jacques Le Roux sent the following on 2/21/2011 11:34 PM: > It's not in CatalogTree.groovy but CategoryTree.groovy. This new > behaviour has been introduced by Hans's team at r1055790. I guess it was > easier for them because they build a catalogs/categories tree. > They could handle it better, if someone wants to ask :o) > > For now I a line in Catalog creation screen to explain that an empty > catalog (no categories in) will not show in the Browse > Catalogs/Categories tree > > Committed at r1073236 , trunk updated > https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog > > Jacques > > From: "BJ Freeman" <[hidden email]> >> seems that they use to be shown and as Sameer shows that is the >> intuitive expectation. >> the other alternative is to shift them to created category with a >> message they must select/create a category for the catalog to show. >> >> ========================= >> BJ Freeman >> Strategic Power Office with Supplier Automation >> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >> Specialtymarket.com <http://www.specialtymarket.com/> >> Systems Integrator-- Glad to Assist >> >> Chat Y! messenger: bjfr33man >> >> >> Deepak Dixit sent the following on 2/21/2011 9:10 PM: >>> Hello Sameer , >>> >>> You have created empty catalog there for its not listed under "Browse >>> Catalogs/Categories" . >>> I have added an existing category in this catalog then its listed >>> under "Browse Catalogs/Categories" . >>> There is an check in CatalogTree.groovy for this, that prevent empty >>> catalog listing. >>> >>> >>> >>> Thanks& Regards >> > > > |
Re: New Catalog not getting display in the list
|
|
Hi,
Thanks for prompt reponse. I tried again adding new catalogs on demo link. I added exisiting categories also (with new catalog) but still catalogs/categories tree not getting populated. I am not sure whether I will need to add other details ( like store, party etc). Let me know if you have any inputs. I have followed same steps as before plus added category to catalog. Still it is not getting populated under tree. New Catalogs id -> CAR & Color. Thanks. Sameer. --- On Tue, 2/22/11, BJ Freeman <[hidden email]> wrote: > From: BJ Freeman <[hidden email]> > Subject: Re: New Catalog not getting display in the list > To: [hidden email] > Date: Tuesday, February 22, 2011, 2:05 PM > acceptable fix > thanks > > ========================= > BJ Freeman > Strategic Power Office with Supplier Automation > <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > Specialtymarket.com <http://www.specialtymarket.com/> > Systems Integrator-- Glad to Assist > > Chat Y! messenger: bjfr33man > > > Jacques Le Roux sent the following on 2/21/2011 11:34 PM: > > It's not in CatalogTree.groovy but > CategoryTree.groovy. This new > > behaviour has been introduced by Hans's team at > r1055790. I guess it was > > easier for them because they build a > catalogs/categories tree. > > They could handle it better, if someone wants to ask > :o) > > > > For now I a line in Catalog creation screen to explain > that an empty > > catalog (no categories in) will not show in the > Browse > > Catalogs/Categories tree > > > > Committed at r1073236 , trunk updated > > https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog > > > > Jacques > > > > From: "BJ Freeman" <[hidden email]> > >> seems that they use to be shown and as Sameer > shows that is the > >> intuitive expectation. > >> the other alternative is to shift them to created > category with a > >> message they must select/create a category for the > catalog to show. > >> > >> ========================= > >> BJ Freeman > >> Strategic Power Office with Supplier Automation > >> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > >> Specialtymarket.com <http://www.specialtymarket.com/> > >> Systems Integrator-- Glad to Assist > >> > >> Chat Y! messenger: bjfr33man > >> > >> > >> Deepak Dixit sent the following on 2/21/2011 9:10 > PM: > >>> Hello Sameer , > >>> > >>> You have created empty catalog there for its > not listed under "Browse > >>> Catalogs/Categories" . > >>> I have added an existing category in this > catalog then its listed > >>> under "Browse Catalogs/Categories" . > >>> There is an check in CatalogTree.groovy for > this, that prevent empty > >>> catalog listing. > >>> > >>> > >>> > >>> Thanks& Regards > >> > > > > > > > > |
Re: New Catalog not getting display in the list
|
|
Hello Sameer,
Its not getting populated due to from date, from date of association is after (2011-02-22 15:13:56.000) form current time (2011-02-22 10:44:16.459), it will getting populated when current time greater then from date. Thanks & Regards -- Deepak Dixit HotWax Media Pvt. Ltd. www.hotwaxmedia.com Contact :- +91-98267-54548 Skype :- deepakdixit On Feb 22, 2011, at 3:30 PM, Sameer Bhadale wrote: > Hi, > Thanks for prompt reponse. > > I tried again adding new catalogs on demo link. I added exisiting categories also (with new catalog) but still catalogs/categories tree not getting populated. > > I am not sure whether I will need to add other details ( like store, party etc). > > Let me know if you have any inputs. > > I have followed same steps as before plus added category to catalog. Still it is not getting populated under tree. > > New Catalogs id -> CAR & Color. > > Thanks. > Sameer. > > --- On Tue, 2/22/11, BJ Freeman <[hidden email]> wrote: > >> From: BJ Freeman <[hidden email]> >> Subject: Re: New Catalog not getting display in the list >> To: [hidden email] >> Date: Tuesday, February 22, 2011, 2:05 PM >> acceptable fix >> thanks >> >> ========================= >> BJ Freeman >> Strategic Power Office with Supplier Automation >> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >> Specialtymarket.com <http://www.specialtymarket.com/> >> Systems Integrator-- Glad to Assist >> >> Chat Y! messenger: bjfr33man >> >> >> Jacques Le Roux sent the following on 2/21/2011 11:34 PM: >>> It's not in CatalogTree.groovy but >> CategoryTree.groovy. This new >>> behaviour has been introduced by Hans's team at >> r1055790. I guess it was >>> easier for them because they build a >> catalogs/categories tree. >>> They could handle it better, if someone wants to ask >> :o) >>> >>> For now I a line in Catalog creation screen to explain >> that an empty >>> catalog (no categories in) will not show in the >> Browse >>> Catalogs/Categories tree >>> >>> Committed at r1073236 , trunk updated >>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>> >>> Jacques >>> >>> From: "BJ Freeman" <[hidden email]> >>>> seems that they use to be shown and as Sameer >> shows that is the >>>> intuitive expectation. >>>> the other alternative is to shift them to created >> category with a >>>> message they must select/create a category for the >> catalog to show. >>>> >>>> ========================= >>>> BJ Freeman >>>> Strategic Power Office with Supplier Automation >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>> Systems Integrator-- Glad to Assist >>>> >>>> Chat Y! messenger: bjfr33man >>>> >>>> >>>> Deepak Dixit sent the following on 2/21/2011 9:10 >> PM: >>>>> Hello Sameer , >>>>> >>>>> You have created empty catalog there for its >> not listed under "Browse >>>>> Catalogs/Categories" . >>>>> I have added an existing category in this >> catalog then its listed >>>>> under "Browse Catalogs/Categories" . >>>>> There is an check in CatalogTree.groovy for >> this, that prevent empty >>>>> catalog listing. >>>>> >>>>> >>>>> >>>>> Thanks& Regards >>>> >>> >>> >>> >> >> > > > |
Re: New Catalog not getting display in the list
|
|
Hi Deepak-
Thanks for response. Even if I add category with past date ( e.g. 21-Feb-2011) then also catalog is not appearing in the tree. it will be great if you can provide me sample data with steps. Much thanks. -sameer. --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> wrote: > From: Deepak Dixit <[hidden email]> > Subject: Re: New Catalog not getting display in the list > To: [hidden email] > Cc: "Deepak Dixit" <[hidden email]> > Date: Tuesday, February 22, 2011, 4:18 PM > Hello Sameer, > > Its not getting populated due to from date, from date of > association is after (2011-02-22 15:13:56.000) form current > time (2011-02-22 10:44:16.459), it will getting populated > when current time greater then from date. > > > > Thanks & Regards > -- > Deepak Dixit > HotWax Media Pvt. Ltd. > www.hotwaxmedia.com > Contact :- +91-98267-54548 > Skype :- deepakdixit > > On Feb 22, 2011, at 3:30 PM, Sameer Bhadale wrote: > > > Hi, > > Thanks for prompt reponse. > > > > I tried again adding new catalogs on demo link. I > added exisiting categories also (with new catalog) but still > catalogs/categories tree not getting populated. > > > > I am not sure whether I will need to add other details > ( like store, party etc). > > > > Let me know if you have any inputs. > > > > I have followed same steps as before plus added > category to catalog. Still it is not getting populated under > tree. > > > > New Catalogs id -> CAR & Color. > > > > Thanks. > > Sameer. > > > > --- On Tue, 2/22/11, BJ Freeman <[hidden email]> > wrote: > > > >> From: BJ Freeman <[hidden email]> > >> Subject: Re: New Catalog not getting display in > the list > >> To: [hidden email] > >> Date: Tuesday, February 22, 2011, 2:05 PM > >> acceptable fix > >> thanks > >> > >> ========================= > >> BJ Freeman > >> Strategic Power Office with Supplier Automation > >> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > >> Specialtymarket.com <http://www.specialtymarket.com/> > >> Systems Integrator-- Glad to Assist > >> > >> Chat Y! messenger: bjfr33man > >> > >> > >> Jacques Le Roux sent the following on 2/21/2011 > 11:34 PM: > >>> It's not in CatalogTree.groovy but > >> CategoryTree.groovy. This new > >>> behaviour has been introduced by Hans's team > at > >> r1055790. I guess it was > >>> easier for them because they build a > >> catalogs/categories tree. > >>> They could handle it better, if someone wants > to ask > >> :o) > >>> > >>> For now I a line in Catalog creation screen to > explain > >> that an empty > >>> catalog (no categories in) will not show in > the > >> Browse > >>> Catalogs/Categories tree > >>> > >>> Committed at r1073236 , trunk updated > >>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog > >>> > >>> Jacques > >>> > >>> From: "BJ Freeman" <[hidden email]> > >>>> seems that they use to be shown and as > Sameer > >> shows that is the > >>>> intuitive expectation. > >>>> the other alternative is to shift them to > created > >> category with a > >>>> message they must select/create a category > for the > >> catalog to show. > >>>> > >>>> ========================= > >>>> BJ Freeman > >>>> Strategic Power Office with Supplier > Automation > >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > >>>> Specialtymarket.com <http://www.specialtymarket.com/> > >>>> Systems Integrator-- Glad to Assist > >>>> > >>>> Chat Y! messenger: bjfr33man > >>>> > >>>> > >>>> Deepak Dixit sent the following on > 2/21/2011 9:10 > >> PM: > >>>>> Hello Sameer , > >>>>> > >>>>> You have created empty catalog there > for its > >> not listed under "Browse > >>>>> Catalogs/Categories" . > >>>>> I have added an existing category in > this > >> catalog then its listed > >>>>> under "Browse Catalogs/Categories" . > >>>>> There is an check in > CatalogTree.groovy for > >> this, that prevent empty > >>>>> catalog listing. > >>>>> > >>>>> > >>>>> > >>>>> Thanks& Regards > >>>> > >>> > >>> > >>> > >> > >> > > > > > > > > |
Re: New Catalog not getting display in the list
|
|
This is always a good idea to refer DemoProduct.xml file for understanding the relationships.
Thanks & Regards -- Pranay Pandey On Feb 22, 2011, at 4:55 PM, Sameer Bhadale wrote: > Hi Deepak- > Thanks for response. > > Even if I add category with past date ( e.g. 21-Feb-2011) then also catalog is not appearing in the tree. > > it will be great if you can provide me sample data with steps. Much thanks. > > -sameer. > > > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> wrote: > >> From: Deepak Dixit <[hidden email]> >> Subject: Re: New Catalog not getting display in the list >> To: [hidden email] >> Cc: "Deepak Dixit" <[hidden email]> >> Date: Tuesday, February 22, 2011, 4:18 PM >> Hello Sameer, >> >> Its not getting populated due to from date, from date of >> association is after (2011-02-22 15:13:56.000) form current >> time (2011-02-22 10:44:16.459), it will getting populated >> when current time greater then from date. >> >> >> >> Thanks & Regards >> -- >> Deepak Dixit >> HotWax Media Pvt. Ltd. >> www.hotwaxmedia.com >> Contact :- +91-98267-54548 >> Skype :- deepakdixit >> >> On Feb 22, 2011, at 3:30 PM, Sameer Bhadale wrote: >> >>> Hi, >>> Thanks for prompt reponse. >>> >>> I tried again adding new catalogs on demo link. I >> added exisiting categories also (with new catalog) but still >> catalogs/categories tree not getting populated. >>> >>> I am not sure whether I will need to add other details >> ( like store, party etc). >>> >>> Let me know if you have any inputs. >>> >>> I have followed same steps as before plus added >> category to catalog. Still it is not getting populated under >> tree. >>> >>> New Catalogs id -> CAR & Color. >>> >>> Thanks. >>> Sameer. >>> >>> --- On Tue, 2/22/11, BJ Freeman <[hidden email]> >> wrote: >>> >>>> From: BJ Freeman <[hidden email]> >>>> Subject: Re: New Catalog not getting display in >> the list >>>> To: [hidden email] >>>> Date: Tuesday, February 22, 2011, 2:05 PM >>>> acceptable fix >>>> thanks >>>> >>>> ========================= >>>> BJ Freeman >>>> Strategic Power Office with Supplier Automation >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>> Systems Integrator-- Glad to Assist >>>> >>>> Chat Y! messenger: bjfr33man >>>> >>>> >>>> Jacques Le Roux sent the following on 2/21/2011 >> 11:34 PM: >>>>> It's not in CatalogTree.groovy but >>>> CategoryTree.groovy. This new >>>>> behaviour has been introduced by Hans's team >> at >>>> r1055790. I guess it was >>>>> easier for them because they build a >>>> catalogs/categories tree. >>>>> They could handle it better, if someone wants >> to ask >>>> :o) >>>>> >>>>> For now I a line in Catalog creation screen to >> explain >>>> that an empty >>>>> catalog (no categories in) will not show in >> the >>>> Browse >>>>> Catalogs/Categories tree >>>>> >>>>> Committed at r1073236 , trunk updated >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>>>> >>>>> Jacques >>>>> >>>>> From: "BJ Freeman" <[hidden email]> >>>>>> seems that they use to be shown and as >> Sameer >>>> shows that is the >>>>>> intuitive expectation. >>>>>> the other alternative is to shift them to >> created >>>> category with a >>>>>> message they must select/create a category >> for the >>>> catalog to show. >>>>>> >>>>>> ========================= >>>>>> BJ Freeman >>>>>> Strategic Power Office with Supplier >> Automation >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>>>> Systems Integrator-- Glad to Assist >>>>>> >>>>>> Chat Y! messenger: bjfr33man >>>>>> >>>>>> >>>>>> Deepak Dixit sent the following on >> 2/21/2011 9:10 >>>> PM: >>>>>>> Hello Sameer , >>>>>>> >>>>>>> You have created empty catalog there >> for its >>>> not listed under "Browse >>>>>>> Catalogs/Categories" . >>>>>>> I have added an existing category in >> this >>>> catalog then its listed >>>>>>> under "Browse Catalogs/Categories" . >>>>>>> There is an check in >> CatalogTree.groovy for >>>> this, that prevent empty >>>>>>> catalog listing. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Thanks& Regards >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> >> > > > |
Re: New Catalog not getting display in the list
|
|
Hi,
Thanks for direction. Just quick question- If I go to Catalog Manager -> Main, am I suppose to get Catalog tree populated under "Browse Catalogs/Categories"? if yes, I am not getting. if no, how will I get it? Thanks- Sameer --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> wrote: > From: Pranay Pandey <[hidden email]> > Subject: Re: New Catalog not getting display in the list > To: [hidden email] > Cc: "Pranay Pandey" <[hidden email]> > Date: Tuesday, February 22, 2011, 4:57 PM > This is always a good idea to refer > DemoProduct.xml file for understanding the relationships. > > Thanks & Regards > -- > Pranay Pandey > > > > > On Feb 22, 2011, at 4:55 PM, Sameer Bhadale wrote: > > > Hi Deepak- > > Thanks for response. > > > > Even if I add category with past date ( e.g. > 21-Feb-2011) then also catalog is not appearing in the > tree. > > > > it will be great if you can provide me sample data > with steps. Much thanks. > > > > -sameer. > > > > > > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> > wrote: > > > >> From: Deepak Dixit <[hidden email]> > >> Subject: Re: New Catalog not getting display in > the list > >> To: [hidden email] > >> Cc: "Deepak Dixit" <[hidden email]> > >> Date: Tuesday, February 22, 2011, 4:18 PM > >> Hello Sameer, > >> > >> Its not getting populated due to from date, from > date of > >> association is after (2011-02-22 15:13:56.000) > form current > >> time (2011-02-22 10:44:16.459), it will getting > populated > >> when current time greater then from date. > >> > >> > >> > >> Thanks & Regards > >> -- > >> Deepak Dixit > >> HotWax Media Pvt. Ltd. > >> www.hotwaxmedia.com > >> Contact :- +91-98267-54548 > >> Skype :- deepakdixit > >> > >> On Feb 22, 2011, at 3:30 PM, Sameer Bhadale > wrote: > >> > >>> Hi, > >>> Thanks for prompt reponse. > >>> > >>> I tried again adding new catalogs on demo > link. I > >> added exisiting categories also (with new catalog) > but still > >> catalogs/categories tree not getting populated. > >>> > >>> I am not sure whether I will need to add other > details > >> ( like store, party etc). > >>> > >>> Let me know if you have any inputs. > >>> > >>> I have followed same steps as before plus > added > >> category to catalog. Still it is not getting > populated under > >> tree. > >>> > >>> New Catalogs id -> CAR & Color. > >>> > >>> Thanks. > >>> Sameer. > >>> > >>> --- On Tue, 2/22/11, BJ Freeman <[hidden email]> > >> wrote: > >>> > >>>> From: BJ Freeman <[hidden email]> > >>>> Subject: Re: New Catalog not getting > display in > >> the list > >>>> To: [hidden email] > >>>> Date: Tuesday, February 22, 2011, 2:05 PM > >>>> acceptable fix > >>>> thanks > >>>> > >>>> ========================= > >>>> BJ Freeman > >>>> Strategic Power Office with Supplier > Automation > >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > >>>> Specialtymarket.com <http://www.specialtymarket.com/> > >>>> Systems Integrator-- Glad to Assist > >>>> > >>>> Chat Y! messenger: bjfr33man > >>>> > >>>> > >>>> Jacques Le Roux sent the following on > 2/21/2011 > >> 11:34 PM: > >>>>> It's not in CatalogTree.groovy but > >>>> CategoryTree.groovy. This new > >>>>> behaviour has been introduced by > Hans's team > >> at > >>>> r1055790. I guess it was > >>>>> easier for them because they build a > >>>> catalogs/categories tree. > >>>>> They could handle it better, if > someone wants > >> to ask > >>>> :o) > >>>>> > >>>>> For now I a line in Catalog creation > screen to > >> explain > >>>> that an empty > >>>>> catalog (no categories in) will not > show in > >> the > >>>> Browse > >>>>> Catalogs/Categories tree > >>>>> > >>>>> Committed at r1073236 , trunk updated > >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog > >>>>> > >>>>> Jacques > >>>>> > >>>>> From: "BJ Freeman" <[hidden email]> > >>>>>> seems that they use to be shown > and as > >> Sameer > >>>> shows that is the > >>>>>> intuitive expectation. > >>>>>> the other alternative is to shift > them to > >> created > >>>> category with a > >>>>>> message they must select/create a > category > >> for the > >>>> catalog to show. > >>>>>> > >>>>>> ========================= > >>>>>> BJ Freeman > >>>>>> Strategic Power Office with > Supplier > >> Automation > >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > >>>>>> Specialtymarket.com <http://www.specialtymarket.com/> > >>>>>> Systems Integrator-- Glad to > Assist > >>>>>> > >>>>>> Chat Y! messenger: bjfr33man > >>>>>> > >>>>>> > >>>>>> Deepak Dixit sent the following > on > >> 2/21/2011 9:10 > >>>> PM: > >>>>>>> Hello Sameer , > >>>>>>> > >>>>>>> You have created empty catalog > there > >> for its > >>>> not listed under "Browse > >>>>>>> Catalogs/Categories" . > >>>>>>> I have added an existing > category in > >> this > >>>> catalog then its listed > >>>>>>> under "Browse > Catalogs/Categories" . > >>>>>>> There is an check in > >> CatalogTree.groovy for > >>>> this, that prevent empty > >>>>>>> catalog listing. > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> Thanks& Regards > >>>>>> > >>>>> > >>>>> > >>>>> > >>>> > >>>> > >>> > >>> > >>> > >> > >> > > > > > > > > |
Re: New Catalog not getting display in the list
|
|
Hi Sameer,
If I go to https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog I am able to see the CAR and color catalog created by you(I think :)) under "Browse Catalogs/Categories"? Is this something you are referring to or something else. If this is the case then please provide some more details about how you are expecting it to be. Trying these things locally will help you for sure. If we talk from the point of view of a developer, understanding the data model working behind these is important and then understanding how actually things should be. If something is obvious and not happening then there is also a scope of improvement which can be discussed and worked on. HTH. Thanks & Regards -- Pranay Pandey On Feb 22, 2011, at 5:59 PM, Sameer Bhadale wrote: > Hi, > Thanks for direction. > Just quick question- > If I go to Catalog Manager -> Main, am I suppose to get Catalog tree populated under "Browse Catalogs/Categories"? if yes, I am not getting. > if no, how will I get it? > > Thanks- > Sameer > > > > --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> wrote: > >> From: Pranay Pandey <[hidden email]> >> Subject: Re: New Catalog not getting display in the list >> To: [hidden email] >> Cc: "Pranay Pandey" <[hidden email]> >> Date: Tuesday, February 22, 2011, 4:57 PM >> This is always a good idea to refer >> DemoProduct.xml file for understanding the relationships. >> >> Thanks & Regards >> -- >> Pranay Pandey >> >> >> >> >> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale wrote: >> >>> Hi Deepak- >>> Thanks for response. >>> >>> Even if I add category with past date ( e.g. >> 21-Feb-2011) then also catalog is not appearing in the >> tree. >>> >>> it will be great if you can provide me sample data >> with steps. Much thanks. >>> >>> -sameer. >>> >>> >>> --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >> wrote: >>> >>>> From: Deepak Dixit <[hidden email]> >>>> Subject: Re: New Catalog not getting display in >> the list >>>> To: [hidden email] >>>> Cc: "Deepak Dixit" <[hidden email]> >>>> Date: Tuesday, February 22, 2011, 4:18 PM >>>> Hello Sameer, >>>> >>>> Its not getting populated due to from date, from >> date of >>>> association is after (2011-02-22 15:13:56.000) >> form current >>>> time (2011-02-22 10:44:16.459), it will getting >> populated >>>> when current time greater then from date. >>>> >>>> >>>> >>>> Thanks & Regards >>>> -- >>>> Deepak Dixit >>>> HotWax Media Pvt. Ltd. >>>> www.hotwaxmedia.com >>>> Contact :- +91-98267-54548 >>>> Skype :- deepakdixit >>>> >>>> On Feb 22, 2011, at 3:30 PM, Sameer Bhadale >> wrote: >>>> >>>>> Hi, >>>>> Thanks for prompt reponse. >>>>> >>>>> I tried again adding new catalogs on demo >> link. I >>>> added exisiting categories also (with new catalog) >> but still >>>> catalogs/categories tree not getting populated. >>>>> >>>>> I am not sure whether I will need to add other >> details >>>> ( like store, party etc). >>>>> >>>>> Let me know if you have any inputs. >>>>> >>>>> I have followed same steps as before plus >> added >>>> category to catalog. Still it is not getting >> populated under >>>> tree. >>>>> >>>>> New Catalogs id -> CAR & Color. >>>>> >>>>> Thanks. >>>>> Sameer. >>>>> >>>>> --- On Tue, 2/22/11, BJ Freeman <[hidden email]> >>>> wrote: >>>>> >>>>>> From: BJ Freeman <[hidden email]> >>>>>> Subject: Re: New Catalog not getting >> display in >>>> the list >>>>>> To: [hidden email] >>>>>> Date: Tuesday, February 22, 2011, 2:05 PM >>>>>> acceptable fix >>>>>> thanks >>>>>> >>>>>> ========================= >>>>>> BJ Freeman >>>>>> Strategic Power Office with Supplier >> Automation >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>>>> Systems Integrator-- Glad to Assist >>>>>> >>>>>> Chat Y! messenger: bjfr33man >>>>>> >>>>>> >>>>>> Jacques Le Roux sent the following on >> 2/21/2011 >>>> 11:34 PM: >>>>>>> It's not in CatalogTree.groovy but >>>>>> CategoryTree.groovy. This new >>>>>>> behaviour has been introduced by >> Hans's team >>>> at >>>>>> r1055790. I guess it was >>>>>>> easier for them because they build a >>>>>> catalogs/categories tree. >>>>>>> They could handle it better, if >> someone wants >>>> to ask >>>>>> :o) >>>>>>> >>>>>>> For now I a line in Catalog creation >> screen to >>>> explain >>>>>> that an empty >>>>>>> catalog (no categories in) will not >> show in >>>> the >>>>>> Browse >>>>>>> Catalogs/Categories tree >>>>>>> >>>>>>> Committed at r1073236 , trunk updated >>>>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>>>>>> >>>>>>> Jacques >>>>>>> >>>>>>> From: "BJ Freeman" <[hidden email]> >>>>>>>> seems that they use to be shown >> and as >>>> Sameer >>>>>> shows that is the >>>>>>>> intuitive expectation. >>>>>>>> the other alternative is to shift >> them to >>>> created >>>>>> category with a >>>>>>>> message they must select/create a >> category >>>> for the >>>>>> catalog to show. >>>>>>>> >>>>>>>> ========================= >>>>>>>> BJ Freeman >>>>>>>> Strategic Power Office with >> Supplier >>>> Automation >>>>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>>>>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>>>>>> Systems Integrator-- Glad to >> Assist >>>>>>>> >>>>>>>> Chat Y! messenger: bjfr33man >>>>>>>> >>>>>>>> >>>>>>>> Deepak Dixit sent the following >> on >>>> 2/21/2011 9:10 >>>>>> PM: >>>>>>>>> Hello Sameer , >>>>>>>>> >>>>>>>>> You have created empty catalog >> there >>>> for its >>>>>> not listed under "Browse >>>>>>>>> Catalogs/Categories" . >>>>>>>>> I have added an existing >> category in >>>> this >>>>>> catalog then its listed >>>>>>>>> under "Browse >> Catalogs/Categories" . >>>>>>>>> There is an check in >>>> CatalogTree.groovy for >>>>>> this, that prevent empty >>>>>>>>> catalog listing. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks& Regards >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> >> > > > |
|
|
In reply to this post by Sameer Bhadale
Are you using IE? It hasn't worked correctly now for about a month
(trunk). For the latest trunk, only Firefox and Chrome correctly display "Browse/Catalogs/Categories". On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale <[hidden email]> wrote: > Hi, > Thanks for direction. > Just quick question- > If I go to Catalog Manager -> Main, am I suppose to get Catalog tree populated under "Browse Catalogs/Categories"? if yes, I am not getting. > if no, how will I get it? > > Thanks- > Sameer > > > > --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> wrote: > >> From: Pranay Pandey <[hidden email]> >> Subject: Re: New Catalog not getting display in the list >> To: [hidden email] >> Cc: "Pranay Pandey" <[hidden email]> >> Date: Tuesday, February 22, 2011, 4:57 PM >> This is always a good idea to refer >> DemoProduct.xml file for understanding the relationships. >> >> Thanks & Regards >> -- >> Pranay Pandey >> >> >> >> >> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale wrote: >> >> > Hi Deepak- >> > Thanks for response. >> > >> > Even if I add category with past date ( e.g. >> 21-Feb-2011) then also catalog is not appearing in the >> tree. >> > >> > it will be great if you can provide me sample data >> with steps. Much thanks. >> > >> > -sameer. >> > >> > >> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >> wrote: >> > >> >> From: Deepak Dixit <[hidden email]> >> >> Subject: Re: New Catalog not getting display in >> the list >> >> To: [hidden email] >> >> Cc: "Deepak Dixit" <[hidden email]> >> >> Date: Tuesday, February 22, 2011, 4:18 PM >> >> Hello Sameer, >> >> >> >> Its not getting populated due to from date, from >> date of >> >> association is after (2011-02-22 15:13:56.000) >> form current >> >> time (2011-02-22 10:44:16.459), it will getting >> populated >> >> when current time greater then from date. >> >> >> >> >> >> >> >> Thanks & Regards >> >> -- >> >> Deepak Dixit >> >> HotWax Media Pvt. Ltd. >> >> www.hotwaxmedia.com >> >> Contact :- +91-98267-54548 >> >> Skype :- deepakdixit >> >> >> >> On Feb 22, 2011, at 3:30 PM, Sameer Bhadale >> wrote: >> >> >> >>> Hi, >> >>> Thanks for prompt reponse. >> >>> >> >>> I tried again adding new catalogs on demo >> link. I >> >> added exisiting categories also (with new catalog) >> but still >> >> catalogs/categories tree not getting populated. >> >>> >> >>> I am not sure whether I will need to add other >> details >> >> ( like store, party etc). >> >>> >> >>> Let me know if you have any inputs. >> >>> >> >>> I have followed same steps as before plus >> added >> >> category to catalog. Still it is not getting >> populated under >> >> tree. >> >>> >> >>> New Catalogs id -> CAR & Color. >> >>> >> >>> Thanks. >> >>> Sameer. >> >>> >> >>> --- On Tue, 2/22/11, BJ Freeman <[hidden email]> >> >> wrote: >> >>> >> >>>> From: BJ Freeman <[hidden email]> >> >>>> Subject: Re: New Catalog not getting >> display in >> >> the list >> >>>> To: [hidden email] >> >>>> Date: Tuesday, February 22, 2011, 2:05 PM >> >>>> acceptable fix >> >>>> thanks >> >>>> >> >>>> ========================= >> >>>> BJ Freeman >> >>>> Strategic Power Office with Supplier >> Automation >> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >> >>>> Systems Integrator-- Glad to Assist >> >>>> >> >>>> Chat Y! messenger: bjfr33man >> >>>> >> >>>> >> >>>> Jacques Le Roux sent the following on >> 2/21/2011 >> >> 11:34 PM: >> >>>>> It's not in CatalogTree.groovy but >> >>>> CategoryTree.groovy. This new >> >>>>> behaviour has been introduced by >> Hans's team >> >> at >> >>>> r1055790. I guess it was >> >>>>> easier for them because they build a >> >>>> catalogs/categories tree. >> >>>>> They could handle it better, if >> someone wants >> >> to ask >> >>>> :o) >> >>>>> >> >>>>> For now I a line in Catalog creation >> screen to >> >> explain >> >>>> that an empty >> >>>>> catalog (no categories in) will not >> show in >> >> the >> >>>> Browse >> >>>>> Catalogs/Categories tree >> >>>>> >> >>>>> Committed at r1073236 , trunk updated >> >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >> >>>>> >> >>>>> Jacques >> >>>>> >> >>>>> From: "BJ Freeman" <[hidden email]> >> >>>>>> seems that they use to be shown >> and as >> >> Sameer >> >>>> shows that is the >> >>>>>> intuitive expectation. >> >>>>>> the other alternative is to shift >> them to >> >> created >> >>>> category with a >> >>>>>> message they must select/create a >> category >> >> for the >> >>>> catalog to show. >> >>>>>> >> >>>>>> ========================= >> >>>>>> BJ Freeman >> >>>>>> Strategic Power Office with >> Supplier >> >> Automation >> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >> >>>>>> Specialtymarket.com <http://www.specialtymarket.com/> >> >>>>>> Systems Integrator-- Glad to >> Assist >> >>>>>> >> >>>>>> Chat Y! messenger: bjfr33man >> >>>>>> >> >>>>>> >> >>>>>> Deepak Dixit sent the following >> on >> >> 2/21/2011 9:10 >> >>>> PM: >> >>>>>>> Hello Sameer , >> >>>>>>> >> >>>>>>> You have created empty catalog >> there >> >> for its >> >>>> not listed under "Browse >> >>>>>>> Catalogs/Categories" . >> >>>>>>> I have added an existing >> category in >> >> this >> >>>> catalog then its listed >> >>>>>>> under "Browse >> Catalogs/Categories" . >> >>>>>>> There is an check in >> >> CatalogTree.groovy for >> >>>> this, that prevent empty >> >>>>>>> catalog listing. >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> Thanks& Regards >> >>>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>> >> >>>> >> >>> >> >>> >> >>> >> >> >> >> >> > >> > >> > >> >> > > > > |
Re: New Catalog not getting display in the list
|
|
You are right Mike!
I was using IE. it work with Mozilla. Thanks a lot!! -Sameer. --- On Tue, 2/22/11, Mike <[hidden email]> wrote: > From: Mike <[hidden email]> > Subject: Re: New Catalog not getting display in the list > To: [hidden email] > Date: Tuesday, February 22, 2011, 9:21 PM > Are you using IE? It hasn't > worked correctly now for about a month > (trunk). For the latest trunk, only Firefox and > Chrome correctly > display "Browse/Catalogs/Categories". > > On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale <[hidden email]> > wrote: > > Hi, > > Thanks for direction. > > Just quick question- > > If I go to Catalog Manager -> Main, am I suppose to > get Catalog tree populated under "Browse > Catalogs/Categories"? if yes, I am not getting. > > if no, how will I get it? > > > > Thanks- > > Sameer > > > > > > > > --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> > wrote: > > > >> From: Pranay Pandey <[hidden email]> > >> Subject: Re: New Catalog not getting display in > the list > >> To: [hidden email] > >> Cc: "Pranay Pandey" <[hidden email]> > >> Date: Tuesday, February 22, 2011, 4:57 PM > >> This is always a good idea to refer > >> DemoProduct.xml file for understanding the > relationships. > >> > >> Thanks & Regards > >> -- > >> Pranay Pandey > >> > >> > >> > >> > >> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale > wrote: > >> > >> > Hi Deepak- > >> > Thanks for response. > >> > > >> > Even if I add category with past date ( e.g. > >> 21-Feb-2011) then also catalog is not appearing in > the > >> tree. > >> > > >> > it will be great if you can provide me sample > data > >> with steps. Much thanks. > >> > > >> > -sameer. > >> > > >> > > >> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> > >> wrote: > >> > > >> >> From: Deepak Dixit <[hidden email]> > >> >> Subject: Re: New Catalog not getting > display in > >> the list > >> >> To: [hidden email] > >> >> Cc: "Deepak Dixit" <[hidden email]> > >> >> Date: Tuesday, February 22, 2011, 4:18 > PM > >> >> Hello Sameer, > >> >> > >> >> Its not getting populated due to from > date, from > >> date of > >> >> association is after (2011-02-22 > 15:13:56.000) > >> form current > >> >> time (2011-02-22 10:44:16.459), it will > getting > >> populated > >> >> when current time greater then from > date. > >> >> > >> >> > >> >> > >> >> Thanks & Regards > >> >> -- > >> >> Deepak Dixit > >> >> HotWax Media Pvt. Ltd. > >> >> www.hotwaxmedia.com > >> >> Contact :- +91-98267-54548 > >> >> Skype :- deepakdixit > >> >> > >> >> On Feb 22, 2011, at 3:30 PM, Sameer > Bhadale > >> wrote: > >> >> > >> >>> Hi, > >> >>> Thanks for prompt reponse. > >> >>> > >> >>> I tried again adding new catalogs on > demo > >> link. I > >> >> added exisiting categories also (with new > catalog) > >> but still > >> >> catalogs/categories tree not getting > populated. > >> >>> > >> >>> I am not sure whether I will need to > add other > >> details > >> >> ( like store, party etc). > >> >>> > >> >>> Let me know if you have any inputs. > >> >>> > >> >>> I have followed same steps as before > plus > >> added > >> >> category to catalog. Still it is not > getting > >> populated under > >> >> tree. > >> >>> > >> >>> New Catalogs id -> CAR & > Color. > >> >>> > >> >>> Thanks. > >> >>> Sameer. > >> >>> > >> >>> --- On Tue, 2/22/11, BJ Freeman > <[hidden email]> > >> >> wrote: > >> >>> > >> >>>> From: BJ Freeman <[hidden email]> > >> >>>> Subject: Re: New Catalog not > getting > >> display in > >> >> the list > >> >>>> To: [hidden email] > >> >>>> Date: Tuesday, February 22, 2011, > 2:05 PM > >> >>>> acceptable fix > >> >>>> thanks > >> >>>> > >> >>>> ========================= > >> >>>> BJ Freeman > >> >>>> Strategic Power Office with > Supplier > >> Automation > >> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > >> >>>> Specialtymarket.com <http://www.specialtymarket.com/> > >> >>>> Systems Integrator-- Glad to > Assist > >> >>>> > >> >>>> Chat Y! messenger: bjfr33man > >> >>>> > >> >>>> > >> >>>> Jacques Le Roux sent the > following on > >> 2/21/2011 > >> >> 11:34 PM: > >> >>>>> It's not in > CatalogTree.groovy but > >> >>>> CategoryTree.groovy. This new > >> >>>>> behaviour has been introduced > by > >> Hans's team > >> >> at > >> >>>> r1055790. I guess it was > >> >>>>> easier for them because they > build a > >> >>>> catalogs/categories tree. > >> >>>>> They could handle it better, > if > >> someone wants > >> >> to ask > >> >>>> :o) > >> >>>>> > >> >>>>> For now I a line in Catalog > creation > >> screen to > >> >> explain > >> >>>> that an empty > >> >>>>> catalog (no categories in) > will not > >> show in > >> >> the > >> >>>> Browse > >> >>>>> Catalogs/Categories tree > >> >>>>> > >> >>>>> Committed at r1073236 , trunk > updated > >> >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog > >> >>>>> > >> >>>>> Jacques > >> >>>>> > >> >>>>> From: "BJ Freeman" <[hidden email]> > >> >>>>>> seems that they use to be > shown > >> and as > >> >> Sameer > >> >>>> shows that is the > >> >>>>>> intuitive expectation. > >> >>>>>> the other alternative is > to shift > >> them to > >> >> created > >> >>>> category with a > >> >>>>>> message they must > select/create a > >> category > >> >> for the > >> >>>> catalog to show. > >> >>>>>> > >> >>>>>> > ========================= > >> >>>>>> BJ Freeman > >> >>>>>> Strategic Power Office > with > >> Supplier > >> >> Automation > >> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > >> >>>>>> Specialtymarket.com > <http://www.specialtymarket.com/> > >> >>>>>> Systems Integrator-- Glad > to > >> Assist > >> >>>>>> > >> >>>>>> Chat Y! messenger: > bjfr33man > >> >>>>>> > >> >>>>>> > >> >>>>>> Deepak Dixit sent the > following > >> on > >> >> 2/21/2011 9:10 > >> >>>> PM: > >> >>>>>>> Hello Sameer , > >> >>>>>>> > >> >>>>>>> You have created > empty catalog > >> there > >> >> for its > >> >>>> not listed under "Browse > >> >>>>>>> Catalogs/Categories" > . > >> >>>>>>> I have added an > existing > >> category in > >> >> this > >> >>>> catalog then its listed > >> >>>>>>> under "Browse > >> Catalogs/Categories" . > >> >>>>>>> There is an check in > >> >> CatalogTree.groovy for > >> >>>> this, that prevent empty > >> >>>>>>> catalog listing. > >> >>>>>>> > >> >>>>>>> > >> >>>>>>> > >> >>>>>>> Thanks& Regards > >> >>>>>> > >> >>>>> > >> >>>>> > >> >>>>> > >> >>>> > >> >>>> > >> >>> > >> >>> > >> >>> > >> >> > >> >> > >> > > >> > > >> > > >> > >> > > > > > > > > > |
|
|
Glad to help. Also be aware that there are other issues (non IE)
still persistent in trunk. It seems that you may have to click twice (or reload) to get a backend page to render correctly. So if you click something and it doesn't look correct, try a reload. On Tue, Feb 22, 2011 at 8:13 AM, Sameer Bhadale <[hidden email]> wrote: > You are right Mike! > I was using IE. it work with Mozilla. > > Thanks a lot!! > > -Sameer. > > > --- On Tue, 2/22/11, Mike <[hidden email]> wrote: > >> From: Mike <[hidden email]> >> Subject: Re: New Catalog not getting display in the list >> To: [hidden email] >> Date: Tuesday, February 22, 2011, 9:21 PM >> Are you using IE? It hasn't >> worked correctly now for about a month >> (trunk). For the latest trunk, only Firefox and >> Chrome correctly >> display "Browse/Catalogs/Categories". >> >> On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale <[hidden email]> >> wrote: >> > Hi, >> > Thanks for direction. >> > Just quick question- >> > If I go to Catalog Manager -> Main, am I suppose to >> get Catalog tree populated under "Browse >> Catalogs/Categories"? if yes, I am not getting. >> > if no, how will I get it? >> > >> > Thanks- >> > Sameer >> > >> > >> > >> > --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> >> wrote: >> > >> >> From: Pranay Pandey <[hidden email]> >> >> Subject: Re: New Catalog not getting display in >> the list >> >> To: [hidden email] >> >> Cc: "Pranay Pandey" <[hidden email]> >> >> Date: Tuesday, February 22, 2011, 4:57 PM >> >> This is always a good idea to refer >> >> DemoProduct.xml file for understanding the >> relationships. >> >> >> >> Thanks & Regards >> >> -- >> >> Pranay Pandey >> >> >> >> >> >> >> >> >> >> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale >> wrote: >> >> >> >> > Hi Deepak- >> >> > Thanks for response. >> >> > >> >> > Even if I add category with past date ( e.g. >> >> 21-Feb-2011) then also catalog is not appearing in >> the >> >> tree. >> >> > >> >> > it will be great if you can provide me sample >> data >> >> with steps. Much thanks. >> >> > >> >> > -sameer. >> >> > >> >> > >> >> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >> >> wrote: >> >> > >> >> >> From: Deepak Dixit <[hidden email]> >> >> >> Subject: Re: New Catalog not getting >> display in >> >> the list >> >> >> To: [hidden email] >> >> >> Cc: "Deepak Dixit" <[hidden email]> >> >> >> Date: Tuesday, February 22, 2011, 4:18 >> PM >> >> >> Hello Sameer, >> >> >> >> >> >> Its not getting populated due to from >> date, from >> >> date of >> >> >> association is after (2011-02-22 >> 15:13:56.000) >> >> form current >> >> >> time (2011-02-22 10:44:16.459), it will >> getting >> >> populated >> >> >> when current time greater then from >> date. >> >> >> >> >> >> >> >> >> >> >> >> Thanks & Regards >> >> >> -- >> >> >> Deepak Dixit >> >> >> HotWax Media Pvt. Ltd. >> >> >> www.hotwaxmedia.com >> >> >> Contact :- +91-98267-54548 >> >> >> Skype :- deepakdixit >> >> >> >> >> >> On Feb 22, 2011, at 3:30 PM, Sameer >> Bhadale >> >> wrote: >> >> >> >> >> >>> Hi, >> >> >>> Thanks for prompt reponse. >> >> >>> >> >> >>> I tried again adding new catalogs on >> demo >> >> link. I >> >> >> added exisiting categories also (with new >> catalog) >> >> but still >> >> >> catalogs/categories tree not getting >> populated. >> >> >>> >> >> >>> I am not sure whether I will need to >> add other >> >> details >> >> >> ( like store, party etc). >> >> >>> >> >> >>> Let me know if you have any inputs. >> >> >>> >> >> >>> I have followed same steps as before >> plus >> >> added >> >> >> category to catalog. Still it is not >> getting >> >> populated under >> >> >> tree. >> >> >>> >> >> >>> New Catalogs id -> CAR & >> Color. >> >> >>> >> >> >>> Thanks. >> >> >>> Sameer. >> >> >>> >> >> >>> --- On Tue, 2/22/11, BJ Freeman >> <[hidden email]> >> >> >> wrote: >> >> >>> >> >> >>>> From: BJ Freeman <[hidden email]> >> >> >>>> Subject: Re: New Catalog not >> getting >> >> display in >> >> >> the list >> >> >>>> To: [hidden email] >> >> >>>> Date: Tuesday, February 22, 2011, >> 2:05 PM >> >> >>>> acceptable fix >> >> >>>> thanks >> >> >>>> >> >> >>>> ========================= >> >> >>>> BJ Freeman >> >> >>>> Strategic Power Office with >> Supplier >> >> Automation >> >> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >> >> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >> >> >>>> Systems Integrator-- Glad to >> Assist >> >> >>>> >> >> >>>> Chat Y! messenger: bjfr33man >> >> >>>> >> >> >>>> >> >> >>>> Jacques Le Roux sent the >> following on >> >> 2/21/2011 >> >> >> 11:34 PM: >> >> >>>>> It's not in >> CatalogTree.groovy but >> >> >>>> CategoryTree.groovy. This new >> >> >>>>> behaviour has been introduced >> by >> >> Hans's team >> >> >> at >> >> >>>> r1055790. I guess it was >> >> >>>>> easier for them because they >> build a >> >> >>>> catalogs/categories tree. >> >> >>>>> They could handle it better, >> if >> >> someone wants >> >> >> to ask >> >> >>>> :o) >> >> >>>>> >> >> >>>>> For now I a line in Catalog >> creation >> >> screen to >> >> >> explain >> >> >>>> that an empty >> >> >>>>> catalog (no categories in) >> will not >> >> show in >> >> >> the >> >> >>>> Browse >> >> >>>>> Catalogs/Categories tree >> >> >>>>> >> >> >>>>> Committed at r1073236 , trunk >> updated >> >> >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >> >> >>>>> >> >> >>>>> Jacques >> >> >>>>> >> >> >>>>> From: "BJ Freeman" <[hidden email]> >> >> >>>>>> seems that they use to be >> shown >> >> and as >> >> >> Sameer >> >> >>>> shows that is the >> >> >>>>>> intuitive expectation. >> >> >>>>>> the other alternative is >> to shift >> >> them to >> >> >> created >> >> >>>> category with a >> >> >>>>>> message they must >> select/create a >> >> category >> >> >> for the >> >> >>>> catalog to show. >> >> >>>>>> >> >> >>>>>> >> ========================= >> >> >>>>>> BJ Freeman >> >> >>>>>> Strategic Power Office >> with >> >> Supplier >> >> >> Automation >> >> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >> >> >>>>>> Specialtymarket.com >> <http://www.specialtymarket.com/> >> >> >>>>>> Systems Integrator-- Glad >> to >> >> Assist >> >> >>>>>> >> >> >>>>>> Chat Y! messenger: >> bjfr33man >> >> >>>>>> >> >> >>>>>> >> >> >>>>>> Deepak Dixit sent the >> following >> >> on >> >> >> 2/21/2011 9:10 >> >> >>>> PM: >> >> >>>>>>> Hello Sameer , >> >> >>>>>>> >> >> >>>>>>> You have created >> empty catalog >> >> there >> >> >> for its >> >> >>>> not listed under "Browse >> >> >>>>>>> Catalogs/Categories" >> . >> >> >>>>>>> I have added an >> existing >> >> category in >> >> >> this >> >> >>>> catalog then its listed >> >> >>>>>>> under "Browse >> >> Catalogs/Categories" . >> >> >>>>>>> There is an check in >> >> >> CatalogTree.groovy for >> >> >>>> this, that prevent empty >> >> >>>>>>> catalog listing. >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> Thanks& Regards >> >> >>>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>> >> >> >>>> >> >> >>> >> >> >>> >> >> >>> >> >> >> >> >> >> >> >> > >> >> > >> >> > >> >> >> >> >> > >> > >> > >> > >> > > > > |
|
|
In reply to this post by BJ Freeman
Hey BJ
I just took a look at CategoryScreens.xml in the product subtree and it looks to me like ofbiz is still using freemarker templates to render screens. The only differences I see are the use of groovy instead of bash and a new "link" element. Am I missing something? I do not see that ftl has been "moved away from". Skip -----Original Message----- From: BJ Freeman [mailto:[hidden email]] Sent: Monday, February 21, 2011 10:09 PM To: [hidden email] Subject: Re: Drop down menu with category and subCategory of the same problem if you look in products/widgets (trunk or 10.4) you will see the code that generates screens and menus. also the data is martialed in the groovy files, either called out in the Widget or in the web-inf/action folder with the name of the ftl file, defined in the widget. The look and feel of these screens are controlled by the code in the themes folder. so if you want to change functionality work with the widgets. if you want you own look and feel then create a new theme. hope that helps ========================= BJ Freeman Strategic Power Office with Supplier Automation <http://www.businessesnetwork.com/automation/viewforum.php?f=52> Specialtymarket.com <http://www.specialtymarket.com/> Systems Integrator-- Glad to Assist Chat Y! messenger: bjfr33man Hardik Handa sent the following on 2/21/2011 9:58 PM: > What are you using presently ??? > > -----Original Message----- > From: BJ Freeman [mailto:[hidden email]] > Sent: 22 February 2011 AM 11:26 > To: [hidden email] > Subject: Re: Drop down menu with category and subCategory of the same problem > > Ok so your using an Ftl, and the pattern your using has been moved away > from. > I will let someone that may stil use this pattern respond. > :D > thanks for the added into. > > ========================= > BJ Freeman > Strategic Power Office with Supplier > Specialtymarket.com<http://www.specialtymarket.com/> > Systems Integrator-- Glad to Assist > > Chat Y! messenger: bjfr33man > > > Hardik Handa sent the following on 2/21/2011 9:49 PM: >> I have been working on ofbiz for a long time now and know the functionalities well as in my knowledge base in middle level ! All i wanted was that could you solve my problem, which i have already mentioned FYI everything is set in accordance to ofbiz framework. With reference to my first mail could you solve my problem i am pasting in the code >> <div id="site_main_nav"> >> <ul class="cufon topnav"> >> <#list topLevelList as category> >> <li class="first_child"><@categoryList parentCategory="" category=category /> >> >> >> <#if (Static["org.ofbiz.product.category.CategoryWorker"].checkTrailItem(request, category.getString("productCategoryId"))) || (curCategoryId?exists&& curCategoryId == category.productCategoryId)> >> <#assign subCatList = Static["org.ofbiz.product.category.CategoryWorker"].getRelatedCategoriesRet( request, "subCatList", category.getString("productCategoryId"), true)> >> <#if subCatList?exists> >> >> <ul class="subnav"> >> <#list subCatList as subCat> >> <li><@categoryList parentCategory=category category=subCat /></#list></li> >> </ul> >> >> >> </#if> >> </#if> >> </#list> >> </li> >> </ul> >> </#if> >> >> >> -----Original Message----- >> From: BJ Freeman [mailto:[hidden email]] >> Sent: 22 February 2011 AM 11:16 >> To: [hidden email] >> Subject: Re: Drop down menu with category and subCategory of the same >> >> I assume you are trying to work in the ofbiz patterns, so let you know >> where to look in ofbiz. >> headers are dealt with in themes. >> however functinoality of forms and screens are dealt with in the >> component/widgets. >> >> if you doing something not in the ofbiz patterns please explain. >> >> >> >> >> ========================= >> >> BJ Freeman >> Strategic Power Office with Supplier >> Specialtymarket.com<http://www.specialtymarket.com/> >> Systems Integrator-- Glad to Assist >> >> Chat Y! messenger: bjfr33man >> >> >> Hardik Handa sent the following on 2/21/2011 9:40 PM: >>> BJ could you be more specific towards your answer i don't see a direct solution to my query with your reply. Thanks in advance. >>> >>> -----Original Message----- >>> From: BJ Freeman [mailto:[hidden email]] >>> Sent: 22 February 2011 AM 11:09 >>> To: [hidden email] >>> Subject: Re: Drop down menu with category and subCategory of the same problem >>> >>> the themes is where you defined how the screens renders to the end user. >>> this is also defined for specific component/screens in its decorators >>> >>> ========================= >>> BJ Freeman >>> Strategic Power Office with Supplier Automation<http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>> Specialtymarket.com<http://www.specialtymarket.com/> >>> Systems Integrator-- Glad to Assist >>> >>> Chat Y! messenger: bjfr33man >>> >>> >>> Hardik Handa sent the following on 2/21/2011 9:30 PM: >>>> I want to display drop down in my header with category and subcategory as drop down options, i was able to get the top level element i.e. category but the subcategory list is a bit dicey. For example whenever i click widgets all the elements in the menu bar on mousemove over give subcategory list of the Widgets, if i click gadgets all of the elements show subcategory list for gadgets ! Any Suggestions ?? Thanks in advance >>>> >>>> >>>> Regards, >>>> Hardik Handa >>>> Software Engineer - CMHP-RETAIL-COE-eCommerce >>>> HCL Technologies Ltd. >>>> C-22A, Sector 57, NOIDA. 201301, UP. (India) >>>> Tel: +91-120-2586417-19 >>>> Mob: +91-9811671898 >>>> www.hcltech.com >>>> www.hcl.com >>>> >>>> >>>> >>>> >>>> ::DISCLAIMER:: >>>> ----------------------------------------------------------------------- >>>> >>>> The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. >>>> It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in >>>> this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. >>>> Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of >>>> this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have >>>> received this email in error please delete it and notify the sender immediately. Before opening any mail and >>>> attachments please check them for viruses and defect. >>>> >>>> ----------------------------------------------------------------------- ------------------------------------------------ >>>> >>> >>> >> >> >> > > > |
Re: New Catalog not getting display in the list
Administrator
|
In reply to this post by Mike Z
This is true in FF (and IE?)
Chrome, Safari and Opera are OK Jacques From: "Mike" <[hidden email]> > Glad to help. Also be aware that there are other issues (non IE) > still persistent in trunk. It seems that you may have to click twice > (or reload) to get a backend page to render correctly. So if you > click something and it doesn't look correct, try a reload. > > On Tue, Feb 22, 2011 at 8:13 AM, Sameer Bhadale <[hidden email]> wrote: >> You are right Mike! >> I was using IE. it work with Mozilla. >> >> Thanks a lot!! >> >> -Sameer. >> >> >> --- On Tue, 2/22/11, Mike <[hidden email]> wrote: >> >>> From: Mike <[hidden email]> >>> Subject: Re: New Catalog not getting display in the list >>> To: [hidden email] >>> Date: Tuesday, February 22, 2011, 9:21 PM >>> Are you using IE? It hasn't >>> worked correctly now for about a month >>> (trunk). For the latest trunk, only Firefox and >>> Chrome correctly >>> display "Browse/Catalogs/Categories". >>> >>> On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale <[hidden email]> >>> wrote: >>> > Hi, >>> > Thanks for direction. >>> > Just quick question- >>> > If I go to Catalog Manager -> Main, am I suppose to >>> get Catalog tree populated under "Browse >>> Catalogs/Categories"? if yes, I am not getting. >>> > if no, how will I get it? >>> > >>> > Thanks- >>> > Sameer >>> > >>> > >>> > >>> > --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> >>> wrote: >>> > >>> >> From: Pranay Pandey <[hidden email]> >>> >> Subject: Re: New Catalog not getting display in >>> the list >>> >> To: [hidden email] >>> >> Cc: "Pranay Pandey" <[hidden email]> >>> >> Date: Tuesday, February 22, 2011, 4:57 PM >>> >> This is always a good idea to refer >>> >> DemoProduct.xml file for understanding the >>> relationships. >>> >> >>> >> Thanks & Regards >>> >> -- >>> >> Pranay Pandey >>> >> >>> >> >>> >> >>> >> >>> >> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale >>> wrote: >>> >> >>> >> > Hi Deepak- >>> >> > Thanks for response. >>> >> > >>> >> > Even if I add category with past date ( e.g. >>> >> 21-Feb-2011) then also catalog is not appearing in >>> the >>> >> tree. >>> >> > >>> >> > it will be great if you can provide me sample >>> data >>> >> with steps. Much thanks. >>> >> > >>> >> > -sameer. >>> >> > >>> >> > >>> >> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >>> >> wrote: >>> >> > >>> >> >> From: Deepak Dixit <[hidden email]> >>> >> >> Subject: Re: New Catalog not getting >>> display in >>> >> the list >>> >> >> To: [hidden email] >>> >> >> Cc: "Deepak Dixit" <[hidden email]> >>> >> >> Date: Tuesday, February 22, 2011, 4:18 >>> PM >>> >> >> Hello Sameer, >>> >> >> >>> >> >> Its not getting populated due to from >>> date, from >>> >> date of >>> >> >> association is after (2011-02-22 >>> 15:13:56.000) >>> >> form current >>> >> >> time (2011-02-22 10:44:16.459), it will >>> getting >>> >> populated >>> >> >> when current time greater then from >>> date. >>> >> >> >>> >> >> >>> >> >> >>> >> >> Thanks & Regards >>> >> >> -- >>> >> >> Deepak Dixit >>> >> >> HotWax Media Pvt. Ltd. >>> >> >> www.hotwaxmedia.com >>> >> >> Contact :- +91-98267-54548 >>> >> >> Skype :- deepakdixit >>> >> >> >>> >> >> On Feb 22, 2011, at 3:30 PM, Sameer >>> Bhadale >>> >> wrote: >>> >> >> >>> >> >>> Hi, >>> >> >>> Thanks for prompt reponse. >>> >> >>> >>> >> >>> I tried again adding new catalogs on >>> demo >>> >> link. I >>> >> >> added exisiting categories also (with new >>> catalog) >>> >> but still >>> >> >> catalogs/categories tree not getting >>> populated. >>> >> >>> >>> >> >>> I am not sure whether I will need to >>> add other >>> >> details >>> >> >> ( like store, party etc). >>> >> >>> >>> >> >>> Let me know if you have any inputs. >>> >> >>> >>> >> >>> I have followed same steps as before >>> plus >>> >> added >>> >> >> category to catalog. Still it is not >>> getting >>> >> populated under >>> >> >> tree. >>> >> >>> >>> >> >>> New Catalogs id -> CAR & >>> Color. >>> >> >>> >>> >> >>> Thanks. >>> >> >>> Sameer. >>> >> >>> >>> >> >>> --- On Tue, 2/22/11, BJ Freeman >>> <[hidden email]> >>> >> >> wrote: >>> >> >>> >>> >> >>>> From: BJ Freeman <[hidden email]> >>> >> >>>> Subject: Re: New Catalog not >>> getting >>> >> display in >>> >> >> the list >>> >> >>>> To: [hidden email] >>> >> >>>> Date: Tuesday, February 22, 2011, >>> 2:05 PM >>> >> >>>> acceptable fix >>> >> >>>> thanks >>> >> >>>> >>> >> >>>> ========================= >>> >> >>>> BJ Freeman >>> >> >>>> Strategic Power Office with >>> Supplier >>> >> Automation >>> >> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>> >> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>> >> >>>> Systems Integrator-- Glad to >>> Assist >>> >> >>>> >>> >> >>>> Chat Y! messenger: bjfr33man >>> >> >>>> >>> >> >>>> >>> >> >>>> Jacques Le Roux sent the >>> following on >>> >> 2/21/2011 >>> >> >> 11:34 PM: >>> >> >>>>> It's not in >>> CatalogTree.groovy but >>> >> >>>> CategoryTree.groovy. This new >>> >> >>>>> behaviour has been introduced >>> by >>> >> Hans's team >>> >> >> at >>> >> >>>> r1055790. I guess it was >>> >> >>>>> easier for them because they >>> build a >>> >> >>>> catalogs/categories tree. >>> >> >>>>> They could handle it better, >>> if >>> >> someone wants >>> >> >> to ask >>> >> >>>> :o) >>> >> >>>>> >>> >> >>>>> For now I a line in Catalog >>> creation >>> >> screen to >>> >> >> explain >>> >> >>>> that an empty >>> >> >>>>> catalog (no categories in) >>> will not >>> >> show in >>> >> >> the >>> >> >>>> Browse >>> >> >>>>> Catalogs/Categories tree >>> >> >>>>> >>> >> >>>>> Committed at r1073236 , trunk >>> updated >>> >> >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>> >> >>>>> >>> >> >>>>> Jacques >>> >> >>>>> >>> >> >>>>> From: "BJ Freeman" <[hidden email]> >>> >> >>>>>> seems that they use to be >>> shown >>> >> and as >>> >> >> Sameer >>> >> >>>> shows that is the >>> >> >>>>>> intuitive expectation. >>> >> >>>>>> the other alternative is >>> to shift >>> >> them to >>> >> >> created >>> >> >>>> category with a >>> >> >>>>>> message they must >>> select/create a >>> >> category >>> >> >> for the >>> >> >>>> catalog to show. >>> >> >>>>>> >>> >> >>>>>> >>> ========================= >>> >> >>>>>> BJ Freeman >>> >> >>>>>> Strategic Power Office >>> with >>> >> Supplier >>> >> >> Automation >>> >> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>> >> >>>>>> Specialtymarket.com >>> <http://www.specialtymarket.com/> >>> >> >>>>>> Systems Integrator-- Glad >>> to >>> >> Assist >>> >> >>>>>> >>> >> >>>>>> Chat Y! messenger: >>> bjfr33man >>> >> >>>>>> >>> >> >>>>>> >>> >> >>>>>> Deepak Dixit sent the >>> following >>> >> on >>> >> >> 2/21/2011 9:10 >>> >> >>>> PM: >>> >> >>>>>>> Hello Sameer , >>> >> >>>>>>> >>> >> >>>>>>> You have created >>> empty catalog >>> >> there >>> >> >> for its >>> >> >>>> not listed under "Browse >>> >> >>>>>>> Catalogs/Categories" >>> . >>> >> >>>>>>> I have added an >>> existing >>> >> category in >>> >> >> this >>> >> >>>> catalog then its listed >>> >> >>>>>>> under "Browse >>> >> Catalogs/Categories" . >>> >> >>>>>>> There is an check in >>> >> >> CatalogTree.groovy for >>> >> >>>> this, that prevent empty >>> >> >>>>>>> catalog listing. >>> >> >>>>>>> >>> >> >>>>>>> >>> >> >>>>>>> >>> >> >>>>>>> Thanks& Regards >>> >> >>>>>> >>> >> >>>>> >>> >> >>>>> >>> >> >>>>> >>> >> >>>> >>> >> >>>> >>> >> >>> >>> >> >>> >>> >> >>> >>> >> >> >>> >> >> >>> >> > >>> >> > >>> >> > >>> >> >>> >> >>> > >>> > >>> > >>> > >>> >> >> >> >> > |
Re: Drop down menu with category and subCategory of the same problem
|
|
In reply to this post by SkipDever
Skip if you look at the code you will see that is does not follow the
pattern used now. Yes the widget call the Ftl when you need the power of ftl when widget will not do the job. the "moved away from" reference is from the ver 3.0 to ver 4.0 where the decorator of widget then the themes were added so the functionality of "screens" was done in widgets, with the code for laying out the data left in the sometimes left in FTL's. David brings up that using only FTL only in eccomerce, this is the first time I have heard this on either mailing list or documentation,so I learned something. ========================= BJ Freeman Strategic Power Office with Supplier Automation <http://www.businessesnetwork.com/automation/viewforum.php?f=52> Specialtymarket.com <http://www.specialtymarket.com/> Systems Integrator-- Glad to Assist Chat Y! messenger: bjfr33man skip@thedevers sent the following on 2/22/2011 9:08 AM: > Hey BJ > > I just took a look at CategoryScreens.xml in the product subtree and it > looks to me like ofbiz is still using freemarker templates to render > screens. The only differences I see are the use of groovy instead of bash > and a new "link" element. > > Am I missing something? I do not see that ftl has been "moved away from". > > Skip > > -----Original Message----- > From: BJ Freeman [mailto:[hidden email]] > Sent: Monday, February 21, 2011 10:09 PM > To: [hidden email] > Subject: Re: Drop down menu with category and subCategory of the same > problem > > > if you look in products/widgets (trunk or 10.4) you will see the code > that generates screens and menus. also the data is martialed in the > groovy files, either called out in the Widget or in the web-inf/action > folder with the name of the ftl file, defined in the widget. > The look and feel of these screens are controlled by the code in the > themes folder. > so if you want to change functionality work with the widgets. > if you want you own look and feel then create a new theme. > > hope that helps > > ========================= > BJ Freeman > Strategic Power Office with Supplier Automation > <http://www.businessesnetwork.com/automation/viewforum.php?f=52> > Specialtymarket.com<http://www.specialtymarket.com/> > Systems Integrator-- Glad to Assist > > Chat Y! messenger: bjfr33man > > > Hardik Handa sent the following on 2/21/2011 9:58 PM: >> What are you using presently ??? >> >> -----Original Message----- >> From: BJ Freeman [mailto:[hidden email]] >> Sent: 22 February 2011 AM 11:26 >> To: [hidden email] >> Subject: Re: Drop down menu with category and subCategory of the same > problem >> >> Ok so your using an Ftl, and the pattern your using has been moved away >> from. >> I will let someone that may stil use this pattern respond. >> :D >> thanks for the added into. >> >> ========================= >> BJ Freeman >> Strategic Power Office with Supplier > Automation<http://www.businessesnetwork.com/automation/viewforum.php?f=52> >> Specialtymarket.com<http://www.specialtymarket.com/> >> Systems Integrator-- Glad to Assist >> >> Chat Y! messenger: bjfr33man >> >> >> Hardik Handa sent the following on 2/21/2011 9:49 PM: >>> I have been working on ofbiz for a long time now and know the > functionalities well as in my knowledge base in middle level ! All i wanted > was that could you solve my problem, which i have already mentioned FYI > everything is set in accordance to ofbiz framework. With reference to my > first mail could you solve my problem i am pasting in the code >>> <div id="site_main_nav"> >>> <ul class="cufon topnav"> >>> <#list topLevelList as category> >>> <li class="first_child"><@categoryList parentCategory="" > category=category /> >>> >>> >>> <#if > (Static["org.ofbiz.product.category.CategoryWorker"].checkTrailItem(request, > category.getString("productCategoryId"))) || (curCategoryId?exists&& > curCategoryId == category.productCategoryId)> >>> <#assign subCatList = > Static["org.ofbiz.product.category.CategoryWorker"].getRelatedCategoriesRet( > request, "subCatList", category.getString("productCategoryId"), true)> >>> <#if subCatList?exists> >>> >>> <ul class="subnav"> >>> <#list subCatList as subCat> >>> <li><@categoryList parentCategory=category category=subCat > /></#list></li> >>> </ul> >>> >>> >>> </#if> >>> </#if> >>> </#list> >>> </li> >>> </ul> >>> </#if> >>> >>> >>> -----Original Message----- >>> From: BJ Freeman [mailto:[hidden email]] >>> Sent: 22 February 2011 AM 11:16 >>> To: [hidden email] >>> Subject: Re: Drop down menu with category and subCategory of the same > problem >>> >>> I assume you are trying to work in the ofbiz patterns, so let you know >>> where to look in ofbiz. >>> headers are dealt with in themes. >>> however functinoality of forms and screens are dealt with in the >>> component/widgets. >>> >>> if you doing something not in the ofbiz patterns please explain. >>> >>> >>> >>> >>> ========================= >>> >>> BJ Freeman >>> Strategic Power Office with Supplier > Automation<http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>> Specialtymarket.com<http://www.specialtymarket.com/> >>> Systems Integrator-- Glad to Assist >>> >>> Chat Y! messenger: bjfr33man >>> >>> >>> Hardik Handa sent the following on 2/21/2011 9:40 PM: >>>> BJ could you be more specific towards your answer i don't see a direct > solution to my query with your reply. Thanks in advance. >>>> >>>> -----Original Message----- >>>> From: BJ Freeman [mailto:[hidden email]] >>>> Sent: 22 February 2011 AM 11:09 >>>> To: [hidden email] >>>> Subject: Re: Drop down menu with category and subCategory of the same > problem >>>> >>>> the themes is where you defined how the screens renders to the end user. >>>> this is also defined for specific component/screens in its decorators >>>> >>>> ========================= >>>> BJ Freeman >>>> Strategic Power Office with Supplier > Automation<http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> Specialtymarket.com<http://www.specialtymarket.com/> >>>> Systems Integrator-- Glad to Assist >>>> >>>> Chat Y! messenger: bjfr33man >>>> >>>> >>>> Hardik Handa sent the following on 2/21/2011 9:30 PM: >>>>> I want to display drop down in my header with category and subcategory > as drop down options, i was able to get the top level element i.e. category > but the subcategory list is a bit dicey. For example whenever i click > widgets all the elements in the menu bar on mousemove over give subcategory > list of the Widgets, if i click gadgets all of the elements show subcategory > list for gadgets ! Any Suggestions ?? Thanks in advance >>>>> >>>>> >>>>> Regards, >>>>> Hardik Handa >>>>> Software Engineer - CMHP-RETAIL-COE-eCommerce >>>>> HCL Technologies Ltd. >>>>> C-22A, Sector 57, NOIDA. 201301, UP. (India) >>>>> Tel: +91-120-2586417-19 >>>>> Mob: +91-9811671898 >>>>> www.hcltech.com >>>>> www.hcl.com >>>>> >>>>> >>>>> >>>>> >>>>> ::DISCLAIMER:: >>>>> ----------------------------------------------------------------------- > ------------------------------------------------ >>>>> >>>>> The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. >>>>> It shall not attach any liability on the originator or HCL or its > affiliates. Any views or opinions presented in >>>>> this email are solely those of the author and may not necessarily > reflect the opinions of HCL or its affiliates. >>>>> Any form of reproduction, dissemination, copying, disclosure, > modification, distribution and / or publication of >>>>> this message without the prior written consent of the author of this > e-mail is strictly prohibited. If you have >>>>> received this email in error please delete it and notify the sender > immediately. Before opening any mail and >>>>> attachments please check them for viruses and defect. >>>>> >>>>> ----------------------------------------------------------------------- > ------------------------------------------------ >>>>> >>>> >>>> >>> >>> >>> >> >> >> > > > |
|
|
In reply to this post by Jacques Le Roux
Hey Jacques. I re-tested the "double click" or "reload" issue based
on your below comment.. https://mail.google.com/mail/?shva=1#label/ofbiz.user/12df9ffd16ac8e9f The reload issue is that if you (in the backend) keep hitting reload (after the screen completely renders), while displaying product detail (for instance): https://localhost/catalog/control/EditProduct?productId=GZ-2644 After a few clicks, the product appears blank, possibly(?) related to a cache expiration. Between IE, FF, and Chrome, it appears that Chrome (haven't tested Safari or Opera) is only browser that seems to work correctly in the backend (trunk). Findings: IE: It NOW doesn't have the "reload" or "double click" problem, but still doesn't render the Catalog list. FF: Still has the reload issue, but does render the Catalog list correctly. Chrome: Seems to work fine. I hope this helps others. On Tue, Feb 22, 2011 at 9:10 AM, Jacques Le Roux <[hidden email]> wrote: > This is true in FF (and IE?) > Chrome, Safari and Opera are OK > > Jacques > > From: "Mike" <[hidden email]> >> >> Glad to help. Also be aware that there are other issues (non IE) >> still persistent in trunk. It seems that you may have to click twice >> (or reload) to get a backend page to render correctly. So if you >> click something and it doesn't look correct, try a reload. >> >> On Tue, Feb 22, 2011 at 8:13 AM, Sameer Bhadale <[hidden email]> >> wrote: >>> >>> You are right Mike! >>> I was using IE. it work with Mozilla. >>> >>> Thanks a lot!! >>> >>> -Sameer. >>> >>> >>> --- On Tue, 2/22/11, Mike <[hidden email]> wrote: >>> >>>> From: Mike <[hidden email]> >>>> Subject: Re: New Catalog not getting display in the list >>>> To: [hidden email] >>>> Date: Tuesday, February 22, 2011, 9:21 PM >>>> Are you using IE? It hasn't >>>> worked correctly now for about a month >>>> (trunk). For the latest trunk, only Firefox and >>>> Chrome correctly >>>> display "Browse/Catalogs/Categories". >>>> >>>> On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale >>>> <[hidden email]> >>>> wrote: >>>> > Hi, >>>> > Thanks for direction. >>>> > Just quick question- >>>> > If I go to Catalog Manager -> Main, am I suppose to >>>> get Catalog tree populated under "Browse >>>> Catalogs/Categories"? if yes, I am not getting. >>>> > if no, how will I get it? >>>> > >>>> > Thanks- >>>> > Sameer >>>> > >>>> > >>>> > >>>> > --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> >>>> wrote: >>>> > >>>> >> From: Pranay Pandey <[hidden email]> >>>> >> Subject: Re: New Catalog not getting display in >>>> the list >>>> >> To: [hidden email] >>>> >> Cc: "Pranay Pandey" <[hidden email]> >>>> >> Date: Tuesday, February 22, 2011, 4:57 PM >>>> >> This is always a good idea to refer >>>> >> DemoProduct.xml file for understanding the >>>> relationships. >>>> >> >>>> >> Thanks & Regards >>>> >> -- >>>> >> Pranay Pandey >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale >>>> wrote: >>>> >> >>>> >> > Hi Deepak- >>>> >> > Thanks for response. >>>> >> > >>>> >> > Even if I add category with past date ( e.g. >>>> >> 21-Feb-2011) then also catalog is not appearing in >>>> the >>>> >> tree. >>>> >> > >>>> >> > it will be great if you can provide me sample >>>> data >>>> >> with steps. Much thanks. >>>> >> > >>>> >> > -sameer. >>>> >> > >>>> >> > >>>> >> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >>>> >> wrote: >>>> >> > >>>> >> >> From: Deepak Dixit <[hidden email]> >>>> >> >> Subject: Re: New Catalog not getting >>>> display in >>>> >> the list >>>> >> >> To: [hidden email] >>>> >> >> Cc: "Deepak Dixit" <[hidden email]> >>>> >> >> Date: Tuesday, February 22, 2011, 4:18 >>>> PM >>>> >> >> Hello Sameer, >>>> >> >> >>>> >> >> Its not getting populated due to from >>>> date, from >>>> >> date of >>>> >> >> association is after (2011-02-22 >>>> 15:13:56.000) >>>> >> form current >>>> >> >> time (2011-02-22 10:44:16.459), it will >>>> getting >>>> >> populated >>>> >> >> when current time greater then from >>>> date. >>>> >> >> >>>> >> >> >>>> >> >> >>>> >> >> Thanks & Regards >>>> >> >> -- >>>> >> >> Deepak Dixit >>>> >> >> HotWax Media Pvt. Ltd. >>>> >> >> www.hotwaxmedia.com >>>> >> >> Contact :- +91-98267-54548 >>>> >> >> Skype :- deepakdixit >>>> >> >> >>>> >> >> On Feb 22, 2011, at 3:30 PM, Sameer >>>> Bhadale >>>> >> wrote: >>>> >> >> >>>> >> >>> Hi, >>>> >> >>> Thanks for prompt reponse. >>>> >> >>> >>>> >> >>> I tried again adding new catalogs on >>>> demo >>>> >> link. I >>>> >> >> added exisiting categories also (with new >>>> catalog) >>>> >> but still >>>> >> >> catalogs/categories tree not getting >>>> populated. >>>> >> >>> >>>> >> >>> I am not sure whether I will need to >>>> add other >>>> >> details >>>> >> >> ( like store, party etc). >>>> >> >>> >>>> >> >>> Let me know if you have any inputs. >>>> >> >>> >>>> >> >>> I have followed same steps as before >>>> plus >>>> >> added >>>> >> >> category to catalog. Still it is not >>>> getting >>>> >> populated under >>>> >> >> tree. >>>> >> >>> >>>> >> >>> New Catalogs id -> CAR & >>>> Color. >>>> >> >>> >>>> >> >>> Thanks. >>>> >> >>> Sameer. >>>> >> >>> >>>> >> >>> --- On Tue, 2/22/11, BJ Freeman >>>> <[hidden email]> >>>> >> >> wrote: >>>> >> >>> >>>> >> >>>> From: BJ Freeman <[hidden email]> >>>> >> >>>> Subject: Re: New Catalog not >>>> getting >>>> >> display in >>>> >> >> the list >>>> >> >>>> To: [hidden email] >>>> >> >>>> Date: Tuesday, February 22, 2011, >>>> 2:05 PM >>>> >> >>>> acceptable fix >>>> >> >>>> thanks >>>> >> >>>> >>>> >> >>>> ========================= >>>> >> >>>> BJ Freeman >>>> >> >>>> Strategic Power Office with >>>> Supplier >>>> >> Automation >>>> >> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> >> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>> >> >>>> Systems Integrator-- Glad to >>>> Assist >>>> >> >>>> >>>> >> >>>> Chat Y! messenger: bjfr33man >>>> >> >>>> >>>> >> >>>> >>>> >> >>>> Jacques Le Roux sent the >>>> following on >>>> >> 2/21/2011 >>>> >> >> 11:34 PM: >>>> >> >>>>> It's not in >>>> CatalogTree.groovy but >>>> >> >>>> CategoryTree.groovy. This new >>>> >> >>>>> behaviour has been introduced >>>> by >>>> >> Hans's team >>>> >> >> at >>>> >> >>>> r1055790. I guess it was >>>> >> >>>>> easier for them because they >>>> build a >>>> >> >>>> catalogs/categories tree. >>>> >> >>>>> They could handle it better, >>>> if >>>> >> someone wants >>>> >> >> to ask >>>> >> >>>> :o) >>>> >> >>>>> >>>> >> >>>>> For now I a line in Catalog >>>> creation >>>> >> screen to >>>> >> >> explain >>>> >> >>>> that an empty >>>> >> >>>>> catalog (no categories in) >>>> will not >>>> >> show in >>>> >> >> the >>>> >> >>>> Browse >>>> >> >>>>> Catalogs/Categories tree >>>> >> >>>>> >>>> >> >>>>> Committed at r1073236 , trunk >>>> updated >>>> >> >>>>> >>>> >> >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>>> >> >>>>> >>>> >> >>>>> Jacques >>>> >> >>>>> >>>> >> >>>>> From: "BJ Freeman" <[hidden email]> >>>> >> >>>>>> seems that they use to be >>>> shown >>>> >> and as >>>> >> >> Sameer >>>> >> >>>> shows that is the >>>> >> >>>>>> intuitive expectation. >>>> >> >>>>>> the other alternative is >>>> to shift >>>> >> them to >>>> >> >> created >>>> >> >>>> category with a >>>> >> >>>>>> message they must >>>> select/create a >>>> >> category >>>> >> >> for the >>>> >> >>>> catalog to show. >>>> >> >>>>>> >>>> >> >>>>>> >>>> ========================= >>>> >> >>>>>> BJ Freeman >>>> >> >>>>>> Strategic Power Office >>>> with >>>> >> Supplier >>>> >> >> Automation >>>> >> >>>>>> >>>> >> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> >> >>>>>> Specialtymarket.com >>>> <http://www.specialtymarket.com/> >>>> >> >>>>>> Systems Integrator-- Glad >>>> to >>>> >> Assist >>>> >> >>>>>> >>>> >> >>>>>> Chat Y! messenger: >>>> bjfr33man >>>> >> >>>>>> >>>> >> >>>>>> >>>> >> >>>>>> Deepak Dixit sent the >>>> following >>>> >> on >>>> >> >> 2/21/2011 9:10 >>>> >> >>>> PM: >>>> >> >>>>>>> Hello Sameer , >>>> >> >>>>>>> >>>> >> >>>>>>> You have created >>>> empty catalog >>>> >> there >>>> >> >> for its >>>> >> >>>> not listed under "Browse >>>> >> >>>>>>> Catalogs/Categories" >>>> . >>>> >> >>>>>>> I have added an >>>> existing >>>> >> category in >>>> >> >> this >>>> >> >>>> catalog then its listed >>>> >> >>>>>>> under "Browse >>>> >> Catalogs/Categories" . >>>> >> >>>>>>> There is an check in >>>> >> >> CatalogTree.groovy for >>>> >> >>>> this, that prevent empty >>>> >> >>>>>>> catalog listing. >>>> >> >>>>>>> >>>> >> >>>>>>> >>>> >> >>>>>>> >>>> >> >>>>>>> Thanks& Regards >>>> >> >>>>>> >>>> >> >>>>> >>>> >> >>>>> >>>> >> >>>>> >>>> >> >>>> >>>> >> >>>> >>>> >> >>> >>>> >> >>> >>>> >> >>> >>>> >> >> >>>> >> >> >>>> >> > >>>> >> > >>>> >> > >>>> >> >>>> >> >>>> > >>>> > >>>> > >>>> > >>>> >>> >>> >>> >>> >> > > |
Re: New Catalog not getting display in the list
|
|
Mike,
Inline... ----- Original Message ----- From: "Mike" <[hidden email]> To: <[hidden email]>; "Jacques Le Roux" <[hidden email]> Sent: Tuesday, February 22, 2011 10:48 PM Subject: Re: New Catalog not getting display in the list > Hey Jacques. I re-tested the "double click" or "reload" issue based > on your below comment.. > > https://mail.google.com/mail/?shva=1#label/ofbiz.user/12df9ffd16ac8e9f ? Get nowhere for me (actually to my gmail account with "label:ofbiz.user" not interpreted (it seems)) > The reload issue is that if you (in the backend) keep hitting reload > (after the screen completely renders), while displaying product detail > (for instance): > > https://localhost/catalog/control/EditProduct?productId=GZ-2644 > > After a few clicks, the product appears blank, possibly(?) related to > a cache expiration. This is interesting... with FF? > Between IE, FF, and Chrome, it appears that Chrome (haven't tested > Safari or Opera) is only browser that seems to work correctly in the > backend (trunk). > > Findings: > IE: It NOW doesn't have the "reload" or "double click" problem, but > still doesn't render the Catalog list. > FF: Still has the reload issue, but does render the Catalog list correctly. > Chrome: Seems to work fine. I tested Opera and Safari, they worked fine. I fear it's related to some CSS or/and javascript issue, still not sure though... Jacques > I hope this helps others. > > On Tue, Feb 22, 2011 at 9:10 AM, Jacques Le Roux > <[hidden email]> wrote: >> This is true in FF (and IE?) >> Chrome, Safari and Opera are OK >> >> Jacques >> >> From: "Mike" <[hidden email]> >>> >>> Glad to help. Also be aware that there are other issues (non IE) >>> still persistent in trunk. It seems that you may have to click twice >>> (or reload) to get a backend page to render correctly. So if you >>> click something and it doesn't look correct, try a reload. >>> >>> On Tue, Feb 22, 2011 at 8:13 AM, Sameer Bhadale <[hidden email]> >>> wrote: >>>> >>>> You are right Mike! >>>> I was using IE. it work with Mozilla. >>>> >>>> Thanks a lot!! >>>> >>>> -Sameer. >>>> >>>> >>>> --- On Tue, 2/22/11, Mike <[hidden email]> wrote: >>>> >>>>> From: Mike <[hidden email]> >>>>> Subject: Re: New Catalog not getting display in the list >>>>> To: [hidden email] >>>>> Date: Tuesday, February 22, 2011, 9:21 PM >>>>> Are you using IE? It hasn't >>>>> worked correctly now for about a month >>>>> (trunk). For the latest trunk, only Firefox and >>>>> Chrome correctly >>>>> display "Browse/Catalogs/Categories". >>>>> >>>>> On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale >>>>> <[hidden email]> >>>>> wrote: >>>>> > Hi, >>>>> > Thanks for direction. >>>>> > Just quick question- >>>>> > If I go to Catalog Manager -> Main, am I suppose to >>>>> get Catalog tree populated under "Browse >>>>> Catalogs/Categories"? if yes, I am not getting. >>>>> > if no, how will I get it? >>>>> > >>>>> > Thanks- >>>>> > Sameer >>>>> > >>>>> > >>>>> > >>>>> > --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> >>>>> wrote: >>>>> > >>>>> >> From: Pranay Pandey <[hidden email]> >>>>> >> Subject: Re: New Catalog not getting display in >>>>> the list >>>>> >> To: [hidden email] >>>>> >> Cc: "Pranay Pandey" <[hidden email]> >>>>> >> Date: Tuesday, February 22, 2011, 4:57 PM >>>>> >> This is always a good idea to refer >>>>> >> DemoProduct.xml file for understanding the >>>>> relationships. >>>>> >> >>>>> >> Thanks & Regards >>>>> >> -- >>>>> >> Pranay Pandey >>>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> >> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale >>>>> wrote: >>>>> >> >>>>> >> > Hi Deepak- >>>>> >> > Thanks for response. >>>>> >> > >>>>> >> > Even if I add category with past date ( e.g. >>>>> >> 21-Feb-2011) then also catalog is not appearing in >>>>> the >>>>> >> tree. >>>>> >> > >>>>> >> > it will be great if you can provide me sample >>>>> data >>>>> >> with steps. Much thanks. >>>>> >> > >>>>> >> > -sameer. >>>>> >> > >>>>> >> > >>>>> >> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >>>>> >> wrote: >>>>> >> > >>>>> >> >> From: Deepak Dixit <[hidden email]> >>>>> >> >> Subject: Re: New Catalog not getting >>>>> display in >>>>> >> the list >>>>> >> >> To: [hidden email] >>>>> >> >> Cc: "Deepak Dixit" <[hidden email]> >>>>> >> >> Date: Tuesday, February 22, 2011, 4:18 >>>>> PM >>>>> >> >> Hello Sameer, >>>>> >> >> >>>>> >> >> Its not getting populated due to from >>>>> date, from >>>>> >> date of >>>>> >> >> association is after (2011-02-22 >>>>> 15:13:56.000) >>>>> >> form current >>>>> >> >> time (2011-02-22 10:44:16.459), it will >>>>> getting >>>>> >> populated >>>>> >> >> when current time greater then from >>>>> date. >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> Thanks & Regards >>>>> >> >> -- >>>>> >> >> Deepak Dixit >>>>> >> >> HotWax Media Pvt. Ltd. >>>>> >> >> www.hotwaxmedia.com >>>>> >> >> Contact :- +91-98267-54548 >>>>> >> >> Skype :- deepakdixit >>>>> >> >> >>>>> >> >> On Feb 22, 2011, at 3:30 PM, Sameer >>>>> Bhadale >>>>> >> wrote: >>>>> >> >> >>>>> >> >>> Hi, >>>>> >> >>> Thanks for prompt reponse. >>>>> >> >>> >>>>> >> >>> I tried again adding new catalogs on >>>>> demo >>>>> >> link. I >>>>> >> >> added exisiting categories also (with new >>>>> catalog) >>>>> >> but still >>>>> >> >> catalogs/categories tree not getting >>>>> populated. >>>>> >> >>> >>>>> >> >>> I am not sure whether I will need to >>>>> add other >>>>> >> details >>>>> >> >> ( like store, party etc). >>>>> >> >>> >>>>> >> >>> Let me know if you have any inputs. >>>>> >> >>> >>>>> >> >>> I have followed same steps as before >>>>> plus >>>>> >> added >>>>> >> >> category to catalog. Still it is not >>>>> getting >>>>> >> populated under >>>>> >> >> tree. >>>>> >> >>> >>>>> >> >>> New Catalogs id -> CAR & >>>>> Color. >>>>> >> >>> >>>>> >> >>> Thanks. >>>>> >> >>> Sameer. >>>>> >> >>> >>>>> >> >>> --- On Tue, 2/22/11, BJ Freeman >>>>> <[hidden email]> >>>>> >> >> wrote: >>>>> >> >>> >>>>> >> >>>> From: BJ Freeman <[hidden email]> >>>>> >> >>>> Subject: Re: New Catalog not >>>>> getting >>>>> >> display in >>>>> >> >> the list >>>>> >> >>>> To: [hidden email] >>>>> >> >>>> Date: Tuesday, February 22, 2011, >>>>> 2:05 PM >>>>> >> >>>> acceptable fix >>>>> >> >>>> thanks >>>>> >> >>>> >>>>> >> >>>> ========================= >>>>> >> >>>> BJ Freeman >>>>> >> >>>> Strategic Power Office with >>>>> Supplier >>>>> >> Automation >>>>> >> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>>> >> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>>> >> >>>> Systems Integrator-- Glad to >>>>> Assist >>>>> >> >>>> >>>>> >> >>>> Chat Y! messenger: bjfr33man >>>>> >> >>>> >>>>> >> >>>> >>>>> >> >>>> Jacques Le Roux sent the >>>>> following on >>>>> >> 2/21/2011 >>>>> >> >> 11:34 PM: >>>>> >> >>>>> It's not in >>>>> CatalogTree.groovy but >>>>> >> >>>> CategoryTree.groovy. This new >>>>> >> >>>>> behaviour has been introduced >>>>> by >>>>> >> Hans's team >>>>> >> >> at >>>>> >> >>>> r1055790. I guess it was >>>>> >> >>>>> easier for them because they >>>>> build a >>>>> >> >>>> catalogs/categories tree. >>>>> >> >>>>> They could handle it better, >>>>> if >>>>> >> someone wants >>>>> >> >> to ask >>>>> >> >>>> :o) >>>>> >> >>>>> >>>>> >> >>>>> For now I a line in Catalog >>>>> creation >>>>> >> screen to >>>>> >> >> explain >>>>> >> >>>> that an empty >>>>> >> >>>>> catalog (no categories in) >>>>> will not >>>>> >> show in >>>>> >> >> the >>>>> >> >>>> Browse >>>>> >> >>>>> Catalogs/Categories tree >>>>> >> >>>>> >>>>> >> >>>>> Committed at r1073236 , trunk >>>>> updated >>>>> >> >>>>> >>>>> >> >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>>>> >> >>>>> >>>>> >> >>>>> Jacques >>>>> >> >>>>> >>>>> >> >>>>> From: "BJ Freeman" <[hidden email]> >>>>> >> >>>>>> seems that they use to be >>>>> shown >>>>> >> and as >>>>> >> >> Sameer >>>>> >> >>>> shows that is the >>>>> >> >>>>>> intuitive expectation. >>>>> >> >>>>>> the other alternative is >>>>> to shift >>>>> >> them to >>>>> >> >> created >>>>> >> >>>> category with a >>>>> >> >>>>>> message they must >>>>> select/create a >>>>> >> category >>>>> >> >> for the >>>>> >> >>>> catalog to show. >>>>> >> >>>>>> >>>>> >> >>>>>> >>>>> ========================= >>>>> >> >>>>>> BJ Freeman >>>>> >> >>>>>> Strategic Power Office >>>>> with >>>>> >> Supplier >>>>> >> >> Automation >>>>> >> >>>>>> >>>>> >> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>>> >> >>>>>> Specialtymarket.com >>>>> <http://www.specialtymarket.com/> >>>>> >> >>>>>> Systems Integrator-- Glad >>>>> to >>>>> >> Assist >>>>> >> >>>>>> >>>>> >> >>>>>> Chat Y! messenger: >>>>> bjfr33man >>>>> >> >>>>>> >>>>> >> >>>>>> >>>>> >> >>>>>> Deepak Dixit sent the >>>>> following >>>>> >> on >>>>> >> >> 2/21/2011 9:10 >>>>> >> >>>> PM: >>>>> >> >>>>>>> Hello Sameer , >>>>> >> >>>>>>> >>>>> >> >>>>>>> You have created >>>>> empty catalog >>>>> >> there >>>>> >> >> for its >>>>> >> >>>> not listed under "Browse >>>>> >> >>>>>>> Catalogs/Categories" >>>>> . >>>>> >> >>>>>>> I have added an >>>>> existing >>>>> >> category in >>>>> >> >> this >>>>> >> >>>> catalog then its listed >>>>> >> >>>>>>> under "Browse >>>>> >> Catalogs/Categories" . >>>>> >> >>>>>>> There is an check in >>>>> >> >> CatalogTree.groovy for >>>>> >> >>>> this, that prevent empty >>>>> >> >>>>>>> catalog listing. >>>>> >> >>>>>>> >>>>> >> >>>>>>> >>>>> >> >>>>>>> >>>>> >> >>>>>>> Thanks& Regards >>>>> >> >>>>>> >>>>> >> >>>>> >>>>> >> >>>>> >>>>> >> >>>>> >>>>> >> >>>> >>>>> >> >>>> >>>>> >> >>> >>>>> >> >>> >>>>> >> >>> >>>>> >> >> >>>>> >> >> >>>>> >> > >>>>> >> > >>>>> >> > >>>>> >> >>>>> >> >>>>> > >>>>> > >>>>> > >>>>> > >>>>> >>>> >>>> >>>> >>>> >>> >> >> > |
Re: New Catalog not getting display in the list
|
In reply to this post by Mike Z
Hi Mike,
Just to be clear, are you talking about Jira issues https://issues.apache.org/jira/browse/OFBIZ-4149 and https://issues.apache.org/jira/browse/OFBIZ-4150? Thanks Paul Foxworthy
--
Coherent Software Australia Pty Ltd http://www.coherentsoftware.com.au/ Bonsai ERP, the all-inclusive ERP system http://www.bonsaierp.com.au/ |
|
|
To answer both Paul and Jacques comments:
>>https://localhost/catalog/control/EditProduct?productId=GZ-2644 >>After a few clicks, the product appears blank, possibly(?) related to >>a cache expiration. > >This is interesting... with FF? Yes, I've observed this (today's trunk) in FF, but not IE|Chrome. Paul, yes, I guess this (the non display of Browse Catalog/Catagories) is related to those two Jira issues, but the reload issue is not. The reload issue is kinda freaky. You click a product found, and up shows a blank product, but not always. Click reload, and there is is. I attached a screenshot. On Tue, Feb 22, 2011 at 2:57 PM, Paul Foxworthy <[hidden email]> wrote: > > Hi Mike, > > Just to be clear, are you talking about Jira issues > https://issues.apache.org/jira/browse/OFBIZ-4149 and > https://issues.apache.org/jira/browse/OFBIZ-4150? > > Thanks > > Paul Foxworthy > > > Mike Z wrote: >> >> Are you using IE? It hasn't worked correctly now for about a month >> (trunk). For the latest trunk, only Firefox and Chrome correctly >> display "Browse/Catalogs/Categories". >> >> On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale <[hidden email]> >> wrote: >>> Hi, >>> Thanks for direction. >>> Just quick question- >>> If I go to Catalog Manager -> Main, am I suppose to get Catalog tree >>> populated under "Browse Catalogs/Categories"? if yes, I am not getting. >>> if no, how will I get it? >>> >>> Thanks- >>> Sameer >>> >>> >>> >>> --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> wrote: >>> >>>> From: Pranay Pandey <[hidden email]> >>>> Subject: Re: New Catalog not getting display in the list >>>> To: [hidden email] >>>> Cc: "Pranay Pandey" <[hidden email]> >>>> Date: Tuesday, February 22, 2011, 4:57 PM >>>> This is always a good idea to refer >>>> DemoProduct.xml file for understanding the relationships. >>>> >>>> Thanks & Regards >>>> -- >>>> Pranay Pandey >>>> >>>> >>>> >>>> >>>> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale wrote: >>>> >>>> > Hi Deepak- >>>> > Thanks for response. >>>> > >>>> > Even if I add category with past date ( e.g. >>>> 21-Feb-2011) then also catalog is not appearing in the >>>> tree. >>>> > >>>> > it will be great if you can provide me sample data >>>> with steps. Much thanks. >>>> > >>>> > -sameer. >>>> > >>>> > >>>> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >>>> wrote: >>>> > >>>> >> From: Deepak Dixit <[hidden email]> >>>> >> Subject: Re: New Catalog not getting display in >>>> the list >>>> >> To: [hidden email] >>>> >> Cc: "Deepak Dixit" <[hidden email]> >>>> >> Date: Tuesday, February 22, 2011, 4:18 PM >>>> >> Hello Sameer, >>>> >> >>>> >> Its not getting populated due to from date, from >>>> date of >>>> >> association is after (2011-02-22 15:13:56.000) >>>> form current >>>> >> time (2011-02-22 10:44:16.459), it will getting >>>> populated >>>> >> when current time greater then from date. >>>> >> >>>> >> >>>> >> >>>> >> Thanks & Regards >>>> >> -- >>>> >> Deepak Dixit >>>> >> HotWax Media Pvt. Ltd. >>>> >> www.hotwaxmedia.com >>>> >> Contact :- +91-98267-54548 >>>> >> Skype :- deepakdixit >>>> >> >>>> >> On Feb 22, 2011, at 3:30 PM, Sameer Bhadale >>>> wrote: >>>> >> >>>> >>> Hi, >>>> >>> Thanks for prompt reponse. >>>> >>> >>>> >>> I tried again adding new catalogs on demo >>>> link. I >>>> >> added exisiting categories also (with new catalog) >>>> but still >>>> >> catalogs/categories tree not getting populated. >>>> >>> >>>> >>> I am not sure whether I will need to add other >>>> details >>>> >> ( like store, party etc). >>>> >>> >>>> >>> Let me know if you have any inputs. >>>> >>> >>>> >>> I have followed same steps as before plus >>>> added >>>> >> category to catalog. Still it is not getting >>>> populated under >>>> >> tree. >>>> >>> >>>> >>> New Catalogs id -> CAR & Color. >>>> >>> >>>> >>> Thanks. >>>> >>> Sameer. >>>> >>> >>>> >>> --- On Tue, 2/22/11, BJ Freeman <[hidden email]> >>>> >> wrote: >>>> >>> >>>> >>>> From: BJ Freeman <[hidden email]> >>>> >>>> Subject: Re: New Catalog not getting >>>> display in >>>> >> the list >>>> >>>> To: [hidden email] >>>> >>>> Date: Tuesday, February 22, 2011, 2:05 PM >>>> >>>> acceptable fix >>>> >>>> thanks >>>> >>>> >>>> >>>> ========================= >>>> >>>> BJ Freeman >>>> >>>> Strategic Power Office with Supplier >>>> Automation >>>> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>> >>>> Systems Integrator-- Glad to Assist >>>> >>>> >>>> >>>> Chat Y! messenger: bjfr33man >>>> >>>> >>>> >>>> >>>> >>>> Jacques Le Roux sent the following on >>>> 2/21/2011 >>>> >> 11:34 PM: >>>> >>>>> It's not in CatalogTree.groovy but >>>> >>>> CategoryTree.groovy. This new >>>> >>>>> behaviour has been introduced by >>>> Hans's team >>>> >> at >>>> >>>> r1055790. I guess it was >>>> >>>>> easier for them because they build a >>>> >>>> catalogs/categories tree. >>>> >>>>> They could handle it better, if >>>> someone wants >>>> >> to ask >>>> >>>> :o) >>>> >>>>> >>>> >>>>> For now I a line in Catalog creation >>>> screen to >>>> >> explain >>>> >>>> that an empty >>>> >>>>> catalog (no categories in) will not >>>> show in >>>> >> the >>>> >>>> Browse >>>> >>>>> Catalogs/Categories tree >>>> >>>>> >>>> >>>>> Committed at r1073236 , trunk updated >>>> >>>>> >>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>>> >>>>> >>>> >>>>> Jacques >>>> >>>>> >>>> >>>>> From: "BJ Freeman" <[hidden email]> >>>> >>>>>> seems that they use to be shown >>>> and as >>>> >> Sameer >>>> >>>> shows that is the >>>> >>>>>> intuitive expectation. >>>> >>>>>> the other alternative is to shift >>>> them to >>>> >> created >>>> >>>> category with a >>>> >>>>>> message they must select/create a >>>> category >>>> >> for the >>>> >>>> catalog to show. >>>> >>>>>> >>>> >>>>>> ========================= >>>> >>>>>> BJ Freeman >>>> >>>>>> Strategic Power Office with >>>> Supplier >>>> >> Automation >>>> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> >>>>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>> >>>>>> Systems Integrator-- Glad to >>>> Assist >>>> >>>>>> >>>> >>>>>> Chat Y! messenger: bjfr33man >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> Deepak Dixit sent the following >>>> on >>>> >> 2/21/2011 9:10 >>>> >>>> PM: >>>> >>>>>>> Hello Sameer , >>>> >>>>>>> >>>> >>>>>>> You have created empty catalog >>>> there >>>> >> for its >>>> >>>> not listed under "Browse >>>> >>>>>>> Catalogs/Categories" . >>>> >>>>>>> I have added an existing >>>> category in >>>> >> this >>>> >>>> catalog then its listed >>>> >>>>>>> under "Browse >>>> Catalogs/Categories" . >>>> >>>>>>> There is an check in >>>> >> CatalogTree.groovy for >>>> >>>> this, that prevent empty >>>> >>>>>>> catalog listing. >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> Thanks& Regards >>>> >>>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>> >>>> >>>> >>>> >>> >>>> >>> >>>> >>> >>>> >> >>>> >> >>>> > >>>> > >>>> > >>>> >>>> >>> >>> >>> >>> >> >> > > -- > View this message in context: http://ofbiz.135035.n4.nabble.com/New-Catalog-not-getting-display-in-the-list-tp3317072p3320221.html > Sent from the OFBiz - User mailing list archive at Nabble.com. > |
Re: New Catalog not getting display in the list
|
Administrator
|
Mike,
If not already done, could you please open a Jira for the product issue, describing the issue, steps to reproduce and if possible URL Thanks Jacques From: "Mike" <[hidden email]> To answer both Paul and Jacques comments: >>https://localhost/catalog/control/EditProduct?productId=GZ-2644 >>After a few clicks, the product appears blank, possibly(?) related to >>a cache expiration. > >This is interesting... with FF? Yes, I've observed this (today's trunk) in FF, but not IE|Chrome. Paul, yes, I guess this (the non display of Browse Catalog/Catagories) is related to those two Jira issues, but the reload issue is not. The reload issue is kinda freaky. You click a product found, and up shows a blank product, but not always. Click reload, and there is is. I attached a screenshot. On Tue, Feb 22, 2011 at 2:57 PM, Paul Foxworthy <[hidden email]> wrote: > > Hi Mike, > > Just to be clear, are you talking about Jira issues > https://issues.apache.org/jira/browse/OFBIZ-4149 and > https://issues.apache.org/jira/browse/OFBIZ-4150? > > Thanks > > Paul Foxworthy > > > Mike Z wrote: >> >> Are you using IE? It hasn't worked correctly now for about a month >> (trunk). For the latest trunk, only Firefox and Chrome correctly >> display "Browse/Catalogs/Categories". >> >> On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale <[hidden email]> >> wrote: >>> Hi, >>> Thanks for direction. >>> Just quick question- >>> If I go to Catalog Manager -> Main, am I suppose to get Catalog tree >>> populated under "Browse Catalogs/Categories"? if yes, I am not getting. >>> if no, how will I get it? >>> >>> Thanks- >>> Sameer >>> >>> >>> >>> --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> wrote: >>> >>>> From: Pranay Pandey <[hidden email]> >>>> Subject: Re: New Catalog not getting display in the list >>>> To: [hidden email] >>>> Cc: "Pranay Pandey" <[hidden email]> >>>> Date: Tuesday, February 22, 2011, 4:57 PM >>>> This is always a good idea to refer >>>> DemoProduct.xml file for understanding the relationships. >>>> >>>> Thanks & Regards >>>> -- >>>> Pranay Pandey >>>> >>>> >>>> >>>> >>>> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale wrote: >>>> >>>> > Hi Deepak- >>>> > Thanks for response. >>>> > >>>> > Even if I add category with past date ( e.g. >>>> 21-Feb-2011) then also catalog is not appearing in the >>>> tree. >>>> > >>>> > it will be great if you can provide me sample data >>>> with steps. Much thanks. >>>> > >>>> > -sameer. >>>> > >>>> > >>>> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >>>> wrote: >>>> > >>>> >> From: Deepak Dixit <[hidden email]> >>>> >> Subject: Re: New Catalog not getting display in >>>> the list >>>> >> To: [hidden email] >>>> >> Cc: "Deepak Dixit" <[hidden email]> >>>> >> Date: Tuesday, February 22, 2011, 4:18 PM >>>> >> Hello Sameer, >>>> >> >>>> >> Its not getting populated due to from date, from >>>> date of >>>> >> association is after (2011-02-22 15:13:56.000) >>>> form current >>>> >> time (2011-02-22 10:44:16.459), it will getting >>>> populated >>>> >> when current time greater then from date. >>>> >> >>>> >> >>>> >> >>>> >> Thanks & Regards >>>> >> -- >>>> >> Deepak Dixit >>>> >> HotWax Media Pvt. Ltd. >>>> >> www.hotwaxmedia.com >>>> >> Contact :- +91-98267-54548 >>>> >> Skype :- deepakdixit >>>> >> >>>> >> On Feb 22, 2011, at 3:30 PM, Sameer Bhadale >>>> wrote: >>>> >> >>>> >>> Hi, >>>> >>> Thanks for prompt reponse. >>>> >>> >>>> >>> I tried again adding new catalogs on demo >>>> link. I >>>> >> added exisiting categories also (with new catalog) >>>> but still >>>> >> catalogs/categories tree not getting populated. >>>> >>> >>>> >>> I am not sure whether I will need to add other >>>> details >>>> >> ( like store, party etc). >>>> >>> >>>> >>> Let me know if you have any inputs. >>>> >>> >>>> >>> I have followed same steps as before plus >>>> added >>>> >> category to catalog. Still it is not getting >>>> populated under >>>> >> tree. >>>> >>> >>>> >>> New Catalogs id -> CAR & Color. >>>> >>> >>>> >>> Thanks. >>>> >>> Sameer. >>>> >>> >>>> >>> --- On Tue, 2/22/11, BJ Freeman <[hidden email]> >>>> >> wrote: >>>> >>> >>>> >>>> From: BJ Freeman <[hidden email]> >>>> >>>> Subject: Re: New Catalog not getting >>>> display in >>>> >> the list >>>> >>>> To: [hidden email] >>>> >>>> Date: Tuesday, February 22, 2011, 2:05 PM >>>> >>>> acceptable fix >>>> >>>> thanks >>>> >>>> >>>> >>>> ========================= >>>> >>>> BJ Freeman >>>> >>>> Strategic Power Office with Supplier >>>> Automation >>>> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>> >>>> Systems Integrator-- Glad to Assist >>>> >>>> >>>> >>>> Chat Y! messenger: bjfr33man >>>> >>>> >>>> >>>> >>>> >>>> Jacques Le Roux sent the following on >>>> 2/21/2011 >>>> >> 11:34 PM: >>>> >>>>> It's not in CatalogTree.groovy but >>>> >>>> CategoryTree.groovy. This new >>>> >>>>> behaviour has been introduced by >>>> Hans's team >>>> >> at >>>> >>>> r1055790. I guess it was >>>> >>>>> easier for them because they build a >>>> >>>> catalogs/categories tree. >>>> >>>>> They could handle it better, if >>>> someone wants >>>> >> to ask >>>> >>>> :o) >>>> >>>>> >>>> >>>>> For now I a line in Catalog creation >>>> screen to >>>> >> explain >>>> >>>> that an empty >>>> >>>>> catalog (no categories in) will not >>>> show in >>>> >> the >>>> >>>> Browse >>>> >>>>> Catalogs/Categories tree >>>> >>>>> >>>> >>>>> Committed at r1073236 , trunk updated >>>> >>>>> >>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>>> >>>>> >>>> >>>>> Jacques >>>> >>>>> >>>> >>>>> From: "BJ Freeman" <[hidden email]> >>>> >>>>>> seems that they use to be shown >>>> and as >>>> >> Sameer >>>> >>>> shows that is the >>>> >>>>>> intuitive expectation. >>>> >>>>>> the other alternative is to shift >>>> them to >>>> >> created >>>> >>>> category with a >>>> >>>>>> message they must select/create a >>>> category >>>> >> for the >>>> >>>> catalog to show. >>>> >>>>>> >>>> >>>>>> ========================= >>>> >>>>>> BJ Freeman >>>> >>>>>> Strategic Power Office with >>>> Supplier >>>> >> Automation >>>> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>> >>>>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>> >>>>>> Systems Integrator-- Glad to >>>> Assist >>>> >>>>>> >>>> >>>>>> Chat Y! messenger: bjfr33man >>>> >>>>>> >>>> >>>>>> >>>> >>>>>> Deepak Dixit sent the following >>>> on >>>> >> 2/21/2011 9:10 >>>> >>>> PM: >>>> >>>>>>> Hello Sameer , >>>> >>>>>>> >>>> >>>>>>> You have created empty catalog >>>> there >>>> >> for its >>>> >>>> not listed under "Browse >>>> >>>>>>> Catalogs/Categories" . >>>> >>>>>>> I have added an existing >>>> category in >>>> >> this >>>> >>>> catalog then its listed >>>> >>>>>>> under "Browse >>>> Catalogs/Categories" . >>>> >>>>>>> There is an check in >>>> >> CatalogTree.groovy for >>>> >>>> this, that prevent empty >>>> >>>>>>> catalog listing. >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> >>>> >>>>>>> Thanks& Regards >>>> >>>>>> >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>> >>>> >>>> >>>> >>> >>>> >>> >>>> >>> >>>> >> >>>> >> >>>> > >>>> > >>>> > >>>> >>>> >>> >>> >>> >>> >> >> > > -- > View this message in context: http://ofbiz.135035.n4.nabble.com/New-Catalog-not-getting-display-in-the-list-tp3317072p3320221.html > Sent from the OFBiz - User mailing list archive at Nabble.com. > |
|
|
Done:
https://issues.apache.org/jira/browse/OFBIZ-4197 Thanks On Wed, Feb 23, 2011 at 12:23 AM, Jacques Le Roux <[hidden email]> wrote: > Mike, > > If not already done, could you please open a Jira for the product issue, > describing the issue, steps to reproduce and if possible URL > > Thanks > > Jacques > > From: "Mike" <[hidden email]> > To answer both Paul and Jacques comments: > >>> https://localhost/catalog/control/EditProduct?productId=GZ-2644 >>> After a few clicks, the product appears blank, possibly(?) related to >>> a cache expiration. >> >> This is interesting... with FF? > > Yes, I've observed this (today's trunk) in FF, but not IE|Chrome. > > Paul, yes, I guess this (the non display of Browse Catalog/Catagories) > is related to those two Jira issues, but the reload issue is not. > > The reload issue is kinda freaky. You click a product found, and up > shows a blank product, but not always. Click reload, and there is is. > > I attached a screenshot. > > > On Tue, Feb 22, 2011 at 2:57 PM, Paul Foxworthy <[hidden email]> wrote: >> >> Hi Mike, >> >> Just to be clear, are you talking about Jira issues >> https://issues.apache.org/jira/browse/OFBIZ-4149 and >> https://issues.apache.org/jira/browse/OFBIZ-4150? >> >> Thanks >> >> Paul Foxworthy >> >> >> Mike Z wrote: >>> >>> Are you using IE? It hasn't worked correctly now for about a month >>> (trunk). For the latest trunk, only Firefox and Chrome correctly >>> display "Browse/Catalogs/Categories". >>> >>> On Tue, Feb 22, 2011 at 4:29 AM, Sameer Bhadale <[hidden email]> >>> wrote: >>>> >>>> Hi, >>>> Thanks for direction. >>>> Just quick question- >>>> If I go to Catalog Manager -> Main, am I suppose to get Catalog tree >>>> populated under "Browse Catalogs/Categories"? if yes, I am not getting. >>>> if no, how will I get it? >>>> >>>> Thanks- >>>> Sameer >>>> >>>> >>>> >>>> --- On Tue, 2/22/11, Pranay Pandey <[hidden email]> >>>> wrote: >>>> >>>>> From: Pranay Pandey <[hidden email]> >>>>> Subject: Re: New Catalog not getting display in the list >>>>> To: [hidden email] >>>>> Cc: "Pranay Pandey" <[hidden email]> >>>>> Date: Tuesday, February 22, 2011, 4:57 PM >>>>> This is always a good idea to refer >>>>> DemoProduct.xml file for understanding the relationships. >>>>> >>>>> Thanks & Regards >>>>> -- >>>>> Pranay Pandey >>>>> >>>>> >>>>> >>>>> >>>>> On Feb 22, 2011, at 4:55 PM, Sameer Bhadale wrote: >>>>> >>>>> > Hi Deepak- >>>>> > Thanks for response. >>>>> > >>>>> > Even if I add category with past date ( e.g. >>>>> 21-Feb-2011) then also catalog is not appearing in the >>>>> tree. >>>>> > >>>>> > it will be great if you can provide me sample data >>>>> with steps. Much thanks. >>>>> > >>>>> > -sameer. >>>>> > >>>>> > >>>>> > --- On Tue, 2/22/11, Deepak Dixit <[hidden email]> >>>>> wrote: >>>>> > >>>>> >> From: Deepak Dixit <[hidden email]> >>>>> >> Subject: Re: New Catalog not getting display in >>>>> the list >>>>> >> To: [hidden email] >>>>> >> Cc: "Deepak Dixit" <[hidden email]> >>>>> >> Date: Tuesday, February 22, 2011, 4:18 PM >>>>> >> Hello Sameer, >>>>> >> >>>>> >> Its not getting populated due to from date, from >>>>> date of >>>>> >> association is after (2011-02-22 15:13:56.000) >>>>> form current >>>>> >> time (2011-02-22 10:44:16.459), it will getting >>>>> populated >>>>> >> when current time greater then from date. >>>>> >> >>>>> >> >>>>> >> >>>>> >> Thanks & Regards >>>>> >> -- >>>>> >> Deepak Dixit >>>>> >> HotWax Media Pvt. Ltd. >>>>> >> www.hotwaxmedia.com >>>>> >> Contact :- +91-98267-54548 >>>>> >> Skype :- deepakdixit >>>>> >> >>>>> >> On Feb 22, 2011, at 3:30 PM, Sameer Bhadale >>>>> wrote: >>>>> >> >>>>> >>> Hi, >>>>> >>> Thanks for prompt reponse. >>>>> >>> >>>>> >>> I tried again adding new catalogs on demo >>>>> link. I >>>>> >> added exisiting categories also (with new catalog) >>>>> but still >>>>> >> catalogs/categories tree not getting populated. >>>>> >>> >>>>> >>> I am not sure whether I will need to add other >>>>> details >>>>> >> ( like store, party etc). >>>>> >>> >>>>> >>> Let me know if you have any inputs. >>>>> >>> >>>>> >>> I have followed same steps as before plus >>>>> added >>>>> >> category to catalog. Still it is not getting >>>>> populated under >>>>> >> tree. >>>>> >>> >>>>> >>> New Catalogs id -> CAR & Color. >>>>> >>> >>>>> >>> Thanks. >>>>> >>> Sameer. >>>>> >>> >>>>> >>> --- On Tue, 2/22/11, BJ Freeman <[hidden email]> >>>>> >> wrote: >>>>> >>> >>>>> >>>> From: BJ Freeman <[hidden email]> >>>>> >>>> Subject: Re: New Catalog not getting >>>>> display in >>>>> >> the list >>>>> >>>> To: [hidden email] >>>>> >>>> Date: Tuesday, February 22, 2011, 2:05 PM >>>>> >>>> acceptable fix >>>>> >>>> thanks >>>>> >>>> >>>>> >>>> ========================= >>>>> >>>> BJ Freeman >>>>> >>>> Strategic Power Office with Supplier >>>>> Automation >>>>> >>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>>> >>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>>> >>>> Systems Integrator-- Glad to Assist >>>>> >>>> >>>>> >>>> Chat Y! messenger: bjfr33man >>>>> >>>> >>>>> >>>> >>>>> >>>> Jacques Le Roux sent the following on >>>>> 2/21/2011 >>>>> >> 11:34 PM: >>>>> >>>>> It's not in CatalogTree.groovy but >>>>> >>>> CategoryTree.groovy. This new >>>>> >>>>> behaviour has been introduced by >>>>> Hans's team >>>>> >> at >>>>> >>>> r1055790. I guess it was >>>>> >>>>> easier for them because they build a >>>>> >>>> catalogs/categories tree. >>>>> >>>>> They could handle it better, if >>>>> someone wants >>>>> >> to ask >>>>> >>>> :o) >>>>> >>>>> >>>>> >>>>> For now I a line in Catalog creation >>>>> screen to >>>>> >> explain >>>>> >>>> that an empty >>>>> >>>>> catalog (no categories in) will not >>>>> show in >>>>> >> the >>>>> >>>> Browse >>>>> >>>>> Catalogs/Categories tree >>>>> >>>>> >>>>> >>>>> Committed at r1073236 , trunk updated >>>>> >>>>> >>>>> https://demo-trunk.ofbiz.apache.org/catalog/control/EditProdCatalog >>>>> >>>>> >>>>> >>>>> Jacques >>>>> >>>>> >>>>> >>>>> From: "BJ Freeman" <[hidden email]> >>>>> >>>>>> seems that they use to be shown >>>>> and as >>>>> >> Sameer >>>>> >>>> shows that is the >>>>> >>>>>> intuitive expectation. >>>>> >>>>>> the other alternative is to shift >>>>> them to >>>>> >> created >>>>> >>>> category with a >>>>> >>>>>> message they must select/create a >>>>> category >>>>> >> for the >>>>> >>>> catalog to show. >>>>> >>>>>> >>>>> >>>>>> ========================= >>>>> >>>>>> BJ Freeman >>>>> >>>>>> Strategic Power Office with >>>>> Supplier >>>>> >> Automation >>>>> >>>>>> <http://www.businessesnetwork.com/automation/viewforum.php?f=52> >>>>> >>>>>> Specialtymarket.com <http://www.specialtymarket.com/> >>>>> >>>>>> Systems Integrator-- Glad to >>>>> Assist >>>>> >>>>>> >>>>> >>>>>> Chat Y! messenger: bjfr33man >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>>> Deepak Dixit sent the following >>>>> on >>>>> >> 2/21/2011 9:10 >>>>> >>>> PM: >>>>> >>>>>>> Hello Sameer , >>>>> >>>>>>> >>>>> >>>>>>> You have created empty catalog >>>>> there >>>>> >> for its >>>>> >>>> not listed under "Browse >>>>> >>>>>>> Catalogs/Categories" . >>>>> >>>>>>> I have added an existing >>>>> category in >>>>> >> this >>>>> >>>> catalog then its listed >>>>> >>>>>>> under "Browse >>>>> Catalogs/Categories" . >>>>> >>>>>>> There is an check in >>>>> >> CatalogTree.groovy for >>>>> >>>> this, that prevent empty >>>>> >>>>>>> catalog listing. >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> >>>>> >>>>>>> Thanks& Regards >>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>>> >>>> >>>>> >>> >>>>> >>> >>>>> >>> >>>>> >> >>>>> >> >>>>> > >>>>> > >>>>> > >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> >> >> -- >> View this message in context: >> http://ofbiz.135035.n4.nabble.com/New-Catalog-not-getting-display-in-the-list-tp3317072p3320221.html >> Sent from the OFBiz - User mailing list archive at Nabble.com. >> > > > |
«
Return to OFBiz - User
|
1 view|%1 views
| Free forum by Nabble | Edit this page |