Re: Old demo restarted
Locked
12
12
 
Administrator
|
Agreed, I have used VisualVMin the past, it's a simple and efficient tool
I have planned to make a VOTE about options if needed. Let's see if it will be necessary (consensus being preferred) Jacques Le 24/08/2018 à 16:06, Girish Vasmatkar a écrit : > Speaking of monitoring tools and if we don't want to go for third party > tools, we can also use VisualVM that comes bundled with Oracle JDK. It can > connect to the remote VM (OFBiz process) and start displaying various > information. > > Very minimal configuration is needed in the form of VM argument to allow > for remote monitoring. Also, to enable further analysis of what went wrong, > why JVM crashed etc, we should also dump heap as the JVM shuts down. > > Too many ways and too many options. Probably need to reach a unanimous > decision, IMO. > > Thanks and Best regards, > Girish Vasmatkar > > On Fri, Aug 24, 2018 at 4:56 PM Jacques Le Roux < > [hidden email]> wrote: > >> Thanks Michael, >> >> Best idea so far! >> >> Jacques >> >> >> Le 24/08/2018 à 11:08, Michael Brohl a écrit : >>> We are monitoring our OFBiz instances with JMX and self hosted Zabbix >> [1]. >>> Zabbix gives you a nice overview about the system health and metrics >> like memory consumption etc. It also sends out warnings (Email, SMS or >> else) >>> if metrics are exceeded (like CPU load or memory consumption) as well as >> the system is not accessible. >>> Looks like this: [2] >>> >>> There is no programming needed, just some configuration for JMX and >> Zabbix. >>> [1] https://www.zabbix.com/ >>> [2] >> https://www.ecomify.de/wp-content/uploads/2018/08/Zabbix_Monitoring.png >>> If we want to see why the demos crash, it might be useful. If we only >> want to monitor if the system is up, a simple cron job which sends a mail >>> might be enough... >>> >>> Regards, >>> >>> Michael Brohl >>> ecomify GmbH >>> www.ecomify.de >>> >>> >>> Am 24.08.18 um 10:07 schrieb Taher Alkhateeb: >>>> Okay all neat ideas, I'm not sure if the energy you will put into >> something >>>> like this is equal to the value produced but if you want to make this >>>> happen I would be happy to assist. >>>> >>>> How much time will it take to make something like this happen? I ask >>>> because it seems Jacques ia getting annoyed with these crashes and we'd >>>> like to help him out. >>>> >>>> On Fri, Aug 24, 2018, 10:59 AM Girish Vasmatkar < >>>> [hidden email]> wrote: >>>> >>>>> Hi Taher >>>>> >>>>> Please see my reply below in-line. >>>>> >>>>> On Fri, Aug 24, 2018 at 12:22 PM Taher Alkhateeb < >>>>> [hidden email]> >>>>> wrote: >>>>> >>>>>> Hi Girish, inline... >>>>>> >>>>>> On Thu, Aug 23, 2018, 7:25 PM Girish Vasmatkar < >>>>>> [hidden email]> wrote: >>>>>> >>>>>>> I had earlier replied to this thread but looks like the email did not >>>>> go >>>>>>> through. I had leaned towards using the tool (only just) instead of >> may >>>>>> be >>>>>>> having a CRON job or an alternative. >>>>>>> >>>>>>> What I feel now is that may be we can use JMX here and try to use >>>>> various >>>>>>> in build MBeans that provide CPU usage for the system and also for >> the >>>>>> JVM >>>>>>> process we are concerned about that is OFBiz instance. We should also >>>>> be >>>>>>> able to get the memory usage of the JVM and if reaches a particular >>>>>>> threshold we can be notified. >>>>>>> >>>>>> Do you have a PoC for all of this? >>>>>> >>>>> GV : I can have one ready; and there is going to be much doing >> involved. >>>>>>> In addition, I think we already add a shutdown hook to the JVM >>>>>> process... I >>>>>>> am not sure and have not used it much but may be we can use it to >> send >>>>>> some >>>>>>> notifications? Of course, it is applicable for graceful exits of JVM >>>>> only >>>>>>> and if you just happen to kill the process it won't be of much help. >>>>>>> >>>>>> The shutdown hook is used for shutting down. I'm not sure what is the >>>>>> purpose of mentioning it here? >>>>>> >>>>> GV : The reason I mentioned shutdown hook was it can be used to >> send >>>>> notification (may be email) or anything per our needs indicating that >> the >>>>> demo process was shut down. Per my understanding, shutdown hook >> gets >>>>> called whenever JVM shuts down gracefully. Graceful word is very >> important >>>>> here because we won't be able to do much if someone just kills the >> process. >>>>> The only thing a shutdown hook will add to this is that we will be >> notified >>>>> then and there. >>>>> >>>>>>> Hope it makes sense and correct me if I am wrong. >>>>>> Well I'm struggling a bit. I didn't understand exactly what needs to >> be >>>>>> done? I see mixed topics about JMX, Mbeans, Memory monitors and >> shutdown >>>>>> hooks. First this seems to be more like coding than a tool, and >> second I >>>>>> have no idea how you want to implement this? >>>>>> >>>>> GV: Yes, it would mostly be coding rather than being a substitute >> for >>>>> the tool. My idea was that to have a timer service run within the JVM >> and >>>>> it access various MBeans for the CPU usage and Memory usages just for >> our >>>>> monitoring purpose and raise an alert if it reaches a threshold. It was >>>>> just to have a glance over how JVM is performing. The disadvantage? The >>>>> service will run in OFBiz JVM and there will be considerable amount of >>>>> coding involved. >>>>> >>>>>> My idea for example is simple: create a cronjob that checks the system >>>>>> periodically and if the demo process stopped, restart it (or maybe >>>>> rebuild >>>>>> and restart). To go with your suggestion we need to perhaps first >>>>>> understand it. >>>>>> >>>>> GV: There is nothing wrong with creating a CRON job, per se. The >> only >>>>> reason why I introduced MBeans in the mix was to be able to sort of >> having >>>>> OFBiz monitor itself within it's realm, hence use of MBeans. I believe >> a >>>>> CRON will be able to do it as well. I probably did not get that we >> probably >>>>> want something that take some action after the JVM has crashed and not >>>>> having something that monitors the process and alerts concerned parties >>>>> that the process is occupying more than say 2 GB or it's CPU usage has >>>>> spiked above 80%. >>>>> >>>>> All in all, I feel we should choose the solution based on what we want >> to >>>>> do and whether we want to take it further as well. I do not know what >> the >>>>> tool does now or whether it can build the system again and restart it >>>>> automatically. I also do not know what measures we take in such an >> event. I >>>>> agree CRON will be simplest of them all, but if the tool provides all >> of >>>>> these (be able to take corrective measures) and not just send >>>>> notifications, then it can also be worth it's salt. Yes, CRON will be >> more >>>>> technical way of achieving :) >>>>> >>>>> Thanks and Best regards, >>>>> Girish Vasmatkar >>>>> HotWax Systems >>>>> >>>>>>> Best regards, >>>>>>> Girish Vasmatkar >>>>>>> HotWax Systems >>>>>>> >>>>>>> >>>>>>> On Thu, Aug 23, 2018 at 8:48 PM Jacques Le Roux < >>>>>>> [hidden email]> wrote: >>>>>>> >>>>>>>> Le 23/08/2018 à 14:04, Taher Alkhateeb a écrit : >>>>>>>>> I'm not sure why you're hanging this on me, >>>>>>>> Because you answered to the bait ;) >>>>>>>> >>>>>>>>> but sure I'm willing to >>>>>>>>> help. >>>>>>>> Thanks, much appreciated! >>>>>>>> >>>>>>>>> Can I get some information on how the crashes are happening and >>>>>>>>> how you're getting notified, and I will take it from there. >>>>>>>> I think after a crash it's mostly to use dumps there (we have >> several >>>>>>> from >>>>>>>> the recent pas) but I'm not sure they will help, and it takes time >> to >>>>>>>> analyse. >>>>>>>> >>>>>>>> In the past I took the time to analyse some of them and it was >>>>>>>> interesting. For instance in 2010 I found a bug in a Java version we >>>>>> were >>>>>>>> using and it >>>>>>>> helped me in a custom project I was also doing then: >>>>>>>> https://markmail.org/message/byu2ivjn7wckayzz >>>>>>>> >>>>>>>> Lastly it was mostly lack of memory, despite having 8GB now. I >>>>> created >>>>>>>> https://issues.apache.org/jira/browse/INFRA-16780 for that, but not >>>>>> sure >>>>>>>> it was >>>>>>>> the reason. At least we have less issues since. >>>>>>>> >>>>>>>> Before (months ago) the Infra was monitoring our demos and alerting >>>>> us >>>>>> by >>>>>>>> mail (you just had to subscribe). Unfortunately we are on our own >> for >>>>>>> that >>>>>>>> now, too much projects in the ASF... >>>>>>>> As as I said initially in this thread I'm currently using >>>>>> montastic.com >>>>>>>> for the email alerts. >>>>>>>> My idea when I started this thread was that it all depends on me, >> and >>>>>>>> that's bad. So I wanted people to be aware, you are much welcome. >>>>>>>> >>>>>>>> Jacques >>>>>>>>> On Thu, Aug 23, 2018 at 2:29 PM Jacques Le Roux >>>>>>>>> <[hidden email]> wrote: >>>>>>>>>> Yes we can, will you? >>>>>>>>>> >>>>>>>>>> Jacques >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Le 22/08/2018 à 19:29, Taher Alkhateeb a écrit : >>>>>>>>>>> Well, we can ask Infra for help, we can check available >>>>> solutions, >>>>>> we >>>>>>>>>>> can create a CRON script that checks things periodically, there >>>>> are >>>>>>>>>>> multiple ways to go about this. >>>>>>>>>>> >>>>>>>>>>> My personal preference is for a simple CRON script that takes >>>>> care >>>>>> of >>>>>>>> this. >>>>>>>>>>> On Wed, Aug 22, 2018 at 8:25 PM Jacques Le Roux >>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>> So you prefer that I'm the only one to take care of the demos >>>>> and >>>>>>> act >>>>>>>> on alerts? >>>>>>>>>>>> Jacques >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Le 22/08/2018 à 18:53, Taher Alkhateeb a écrit : >>>>>>>>>>>>> I prefer not to include any tools without proper analysis and >>>>>>>>>>>>> discussion first. Less is more. >>>>>>>>>>>>> On Wed, Aug 22, 2018 at 5:31 PM Jacques Le Roux >>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Should I consider no answers as a lazy consensus and should I >>>>>> send >>>>>>>> (rare) alerts to this ML? >>>>>>>>>>>>>> Without any answers I'll consider it a lazy consensus in 2 >>>>> days. >>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le 17/08/2018 à 12:22, Jacques Le Roux a écrit : >>>>>>>>>>>>>>> Le 13/08/2018 à 18:21, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>> Le 12/08/2018 à 11:26, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> This morning I noticed the old demo was down and restarted >>>>> it >>>>>>>> after cleaning things. >>>>>>>>>>>>>>>>> Previously (still some weeks ago) Daniel Gruno's (from >>>>> Infra >>>>>>>> team) company was kindly providing us a mean to monitor our demos >> but >>>>>> it >>>>>>>> seems that >>>>>>>>>>>>>>>>> this mean is no longer available >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I have asked about it and will let you know about it... >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Have a good weekend >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Jadques >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Daniel confirmed it's terminated. I turned to UpTimeRobot >>>>>> which >>>>>>>> is free and seems as well good :) >>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> This thread started on user ML but I don't want to bother >>>>>>> everyone >>>>>>>> with technical details. >>>>>>>>>>>>>>> I used my own @a.o email to create the monitoring. >>>>> UpTimeRobot >>>>>> is >>>>>>>> certainly the best free monitoring tool, with some possibilities >>>>> others >>>>>>>> don't give. >>>>>>>>>>>>>>> But the free version has an inconvenient. You can only check >>>>>>> every >>>>>>>> 5 mins and when the instances restart it takes more than 5 mins >> each. >>>>>>>>>>>>>>> So everyday I get a down an up alerts for each. I have >>>>> switched >>>>>>> to >>>>>>>> montastic.com. >>>>>>>>>>>>>>> I was wondering if we don't want to share that here. >>>>>>>>>>>>>>> We could then have these alerts here and any committer, using >>>>>> the >>>>>>>> info inhttps://svn.apache.org/repos/asf/ofbiz/tools/demo-backup >>>>> could >>>>>>>> handle issues. >>>>>>>>>>>>>>> It seems better, isn'it? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>> >> |
|
Since we're talking about our demo instances on the infrastructure of the
ASF I suggest getting in touch with INFRA and work out a solution with them that favours both parties. They surely will have monitoring solutions in place and can advice on what is achievable. Best regards, Pierre Smits Apache Trafodion <https://trafodion.apache.org>, Vice President Apache Directory <https://directory.apache.org>, PMC Member Apache Incubator <https://incubator.apache.org>, committer *Apache OFBiz <https://ofbiz.apache.org>, contributor (without privileges) since 2008* Apache Steve <https://steve.apache.org>, committer On Fri, Aug 24, 2018 at 4:36 PM Jacques Le Roux < [hidden email]> wrote: > Agreed, I have used VisualVMin the past, it's a simple and efficient tool > > I have planned to make a VOTE about options if needed. Let's see if it > will be necessary (consensus being preferred) > > Jacques > > > Le 24/08/2018 à 16:06, Girish Vasmatkar a écrit : > > Speaking of monitoring tools and if we don't want to go for third party > > tools, we can also use VisualVM that comes bundled with Oracle JDK. It > can > > connect to the remote VM (OFBiz process) and start displaying various > > information. > > > > Very minimal configuration is needed in the form of VM argument to allow > > for remote monitoring. Also, to enable further analysis of what went > wrong, > > why JVM crashed etc, we should also dump heap as the JVM shuts down. > > > > Too many ways and too many options. Probably need to reach a unanimous > > decision, IMO. > > > > Thanks and Best regards, > > Girish Vasmatkar > > > > On Fri, Aug 24, 2018 at 4:56 PM Jacques Le Roux < > > [hidden email]> wrote: > > > >> Thanks Michael, > >> > >> Best idea so far! > >> > >> Jacques > >> > >> > >> Le 24/08/2018 à 11:08, Michael Brohl a écrit : > >>> We are monitoring our OFBiz instances with JMX and self hosted Zabbix > >> [1]. > >>> Zabbix gives you a nice overview about the system health and metrics > >> like memory consumption etc. It also sends out warnings (Email, SMS or > >> else) > >>> if metrics are exceeded (like CPU load or memory consumption) as well > as > >> the system is not accessible. > >>> Looks like this: [2] > >>> > >>> There is no programming needed, just some configuration for JMX and > >> Zabbix. > >>> [1] https://www.zabbix.com/ > >>> [2] > >> https://www.ecomify.de/wp-content/uploads/2018/08/Zabbix_Monitoring.png > >>> If we want to see why the demos crash, it might be useful. If we only > >> want to monitor if the system is up, a simple cron job which sends a > >>> might be enough... > >>> > >>> Regards, > >>> > >>> Michael Brohl > >>> ecomify GmbH > >>> www.ecomify.de > >>> > >>> > >>> Am 24.08.18 um 10:07 schrieb Taher Alkhateeb: > >>>> Okay all neat ideas, I'm not sure if the energy you will put into > >> something > >>>> like this is equal to the value produced but if you want to make this > >>>> happen I would be happy to assist. > >>>> > >>>> How much time will it take to make something like this happen? I ask > >>>> because it seems Jacques ia getting annoyed with these crashes and > we'd > >>>> like to help him out. > >>>> > >>>> On Fri, Aug 24, 2018, 10:59 AM Girish Vasmatkar < > >>>> [hidden email]> wrote: > >>>> > >>>>> Hi Taher > >>>>> > >>>>> Please see my reply below in-line. > >>>>> > >>>>> On Fri, Aug 24, 2018 at 12:22 PM Taher Alkhateeb < > >>>>> [hidden email]> > >>>>> wrote: > >>>>> > >>>>>> Hi Girish, inline... > >>>>>> > >>>>>> On Thu, Aug 23, 2018, 7:25 PM Girish Vasmatkar < > >>>>>> [hidden email]> wrote: > >>>>>> > >>>>>>> I had earlier replied to this thread but looks like the email did > not > >>>>> go > >>>>>>> through. I had leaned towards using the tool (only just) instead of > >> may > >>>>>> be > >>>>>>> having a CRON job or an alternative. > >>>>>>> > >>>>>>> What I feel now is that may be we can use JMX here and try to use > >>>>> various > >>>>>>> in build MBeans that provide CPU usage for the system and also for > >> the > >>>>>> JVM > >>>>>>> process we are concerned about that is OFBiz instance. We should > also > >>>>> be > >>>>>>> able to get the memory usage of the JVM and if reaches a particular > >>>>>>> threshold we can be notified. > >>>>>>> > >>>>>> Do you have a PoC for all of this? > >>>>>> > >>>>> GV : I can have one ready; and there is going to be much doing > >> involved. > >>>>>>> In addition, I think we already add a shutdown hook to the JVM > >>>>>> process... I > >>>>>>> am not sure and have not used it much but may be we can use it to > >> send > >>>>>> some > >>>>>>> notifications? Of course, it is applicable for graceful exits of > JVM > >>>>> only > >>>>>>> and if you just happen to kill the process it won't be of much > help. > >>>>>>> > >>>>>> The shutdown hook is used for shutting down. I'm not sure what is > the > >>>>>> purpose of mentioning it here? > >>>>>> > >>>>> GV : The reason I mentioned shutdown hook was it can be used to > >> send > >>>>> notification (may be email) or anything per our needs indicating that > >> the > >>>>> demo process was shut down. Per my understanding, shutdown hook > >> gets > >>>>> called whenever JVM shuts down gracefully. Graceful word is very > >> important > >>>>> here because we won't be able to do much if someone just kills the > >> process. > >>>>> The only thing a shutdown hook will add to this is that we will be > >> notified > >>>>> then and there. > >>>>> > >>>>>>> Hope it makes sense and correct me if I am wrong. > >>>>>> Well I'm struggling a bit. I didn't understand exactly what needs to > >> be > >>>>>> done? I see mixed topics about JMX, Mbeans, Memory monitors and > >> shutdown > >>>>>> hooks. First this seems to be more like coding than a tool, and > >> second I > >>>>>> have no idea how you want to implement this? > >>>>>> > >>>>> GV: Yes, it would mostly be coding rather than being a > substitute > >> for > >>>>> the tool. My idea was that to have a timer service run within the JVM > >> and > >>>>> it access various MBeans for the CPU usage and Memory usages just for > >> our > >>>>> monitoring purpose and raise an alert if it reaches a threshold. It > was > >>>>> just to have a glance over how JVM is performing. The disadvantage? > The > >>>>> service will run in OFBiz JVM and there will be considerable amount > of > >>>>> coding involved. > >>>>> > >>>>>> My idea for example is simple: create a cronjob that checks the > system > >>>>>> periodically and if the demo process stopped, restart it (or maybe > >>>>> rebuild > >>>>>> and restart). To go with your suggestion we need to perhaps first > >>>>>> understand it. > >>>>>> > >>>>> GV: There is nothing wrong with creating a CRON job, per se. The > >> only > >>>>> reason why I introduced MBeans in the mix was to be able to sort of > >> having > >>>>> OFBiz monitor itself within it's realm, hence use of MBeans. I > believe > >> a > >>>>> CRON will be able to do it as well. I probably did not get that we > >> probably > >>>>> want something that take some action after the JVM has crashed and > not > >>>>> having something that monitors the process and alerts concerned > parties > >>>>> that the process is occupying more than say 2 GB or it's CPU usage > has > >>>>> spiked above 80%. > >>>>> > >>>>> All in all, I feel we should choose the solution based on what we > want > >> to > >>>>> do and whether we want to take it further as well. I do not know what > >> the > >>>>> tool does now or whether it can build the system again and restart it > >>>>> automatically. I also do not know what measures we take in such an > >> event. I > >>>>> agree CRON will be simplest of them all, but if the tool provides all > >> of > >>>>> these (be able to take corrective measures) and not just send > >>>>> notifications, then it can also be worth it's salt. Yes, CRON will be > >> more > >>>>> technical way of achieving :) > >>>>> > >>>>> Thanks and Best regards, > >>>>> Girish Vasmatkar > >>>>> HotWax Systems > >>>>> > >>>>>>> Best regards, > >>>>>>> Girish Vasmatkar > >>>>>>> HotWax Systems > >>>>>>> > >>>>>>> > >>>>>>> On Thu, Aug 23, 2018 at 8:48 PM Jacques Le Roux < > >>>>>>> [hidden email]> wrote: > >>>>>>> > >>>>>>>> Le 23/08/2018 à 14:04, Taher Alkhateeb a écrit : > >>>>>>>>> I'm not sure why you're hanging this on me, > >>>>>>>> Because you answered to the bait ;) > >>>>>>>> > >>>>>>>>> but sure I'm willing to > >>>>>>>>> help. > >>>>>>>> Thanks, much appreciated! > >>>>>>>> > >>>>>>>>> Can I get some information on how the crashes are happening and > >>>>>>>>> how you're getting notified, and I will take it from there. > >>>>>>>> I think after a crash it's mostly to use dumps there (we have > >> several > >>>>>>> from > >>>>>>>> the recent pas) but I'm not sure they will help, and it takes time > >> to > >>>>>>>> analyse. > >>>>>>>> > >>>>>>>> In the past I took the time to analyse some of them and it was > >>>>>>>> interesting. For instance in 2010 I found a bug in a Java version > we > >>>>>> were > >>>>>>>> using and it > >>>>>>>> helped me in a custom project I was also doing then: > >>>>>>>> https://markmail.org/message/byu2ivjn7wckayzz > >>>>>>>> > >>>>>>>> Lastly it was mostly lack of memory, despite having 8GB now. I > >>>>> created > >>>>>>>> https://issues.apache.org/jira/browse/INFRA-16780 for that, but > not > >>>>>> sure > >>>>>>>> it was > >>>>>>>> the reason. At least we have less issues since. > >>>>>>>> > >>>>>>>> Before (months ago) the Infra was monitoring our demos and > alerting > >>>>> us > >>>>>> by > >>>>>>>> mail (you just had to subscribe). Unfortunately we are on our own > >> for > >>>>>>> that > >>>>>>>> now, too much projects in the ASF... > >>>>>>>> As as I said initially in this thread I'm currently using > >>>>>> montastic.com > >>>>>>>> for the email alerts. > >>>>>>>> My idea when I started this thread was that it all depends on me, > >> and > >>>>>>>> that's bad. So I wanted people to be aware, you are much welcome. > >>>>>>>> > >>>>>>>> Jacques > >>>>>>>>> On Thu, Aug 23, 2018 at 2:29 PM Jacques Le Roux > >>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>> Yes we can, will you? > >>>>>>>>>> > >>>>>>>>>> Jacques > >>>>>>>>>> > >>>>>>>>>> > >>>>>>>>>> Le 22/08/2018 à 19:29, Taher Alkhateeb a écrit : > >>>>>>>>>>> Well, we can ask Infra for help, we can check available > >>>>> solutions, > >>>>>> we > >>>>>>>>>>> can create a CRON script that checks things periodically, there > >>>>> are > >>>>>>>>>>> multiple ways to go about this. > >>>>>>>>>>> > >>>>>>>>>>> My personal preference is for a simple CRON script that takes > >>>>> care > >>>>>> of > >>>>>>>> this. > >>>>>>>>>>> On Wed, Aug 22, 2018 at 8:25 PM Jacques Le Roux > >>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>> So you prefer that I'm the only one to take care of the demos > >>>>> and > >>>>>>> act > >>>>>>>> on alerts? > >>>>>>>>>>>> Jacques > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> Le 22/08/2018 à 18:53, Taher Alkhateeb a écrit : > >>>>>>>>>>>>> I prefer not to include any tools without proper analysis and > >>>>>>>>>>>>> discussion first. Less is more. > >>>>>>>>>>>>> On Wed, Aug 22, 2018 at 5:31 PM Jacques Le Roux > >>>>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>>>> Hi, > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Should I consider no answers as a lazy consensus and should > I > >>>>>> send > >>>>>>>> (rare) alerts to this ML? > >>>>>>>>>>>>>> Without any answers I'll consider it a lazy consensus in 2 > >>>>> days. > >>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Le 17/08/2018 à 12:22, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>> Le 13/08/2018 à 18:21, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>> Le 12/08/2018 à 11:26, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>>> Hi, > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> This morning I noticed the old demo was down and > restarted > >>>>> it > >>>>>>>> after cleaning things. > >>>>>>>>>>>>>>>>> Previously (still some weeks ago) Daniel Gruno's (from > >>>>> Infra > >>>>>>>> team) company was kindly providing us a mean to monitor our demos > >> but > >>>>>> it > >>>>>>>> seems that > >>>>>>>>>>>>>>>>> this mean is no longer available > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> I have asked about it and will let you know about it... > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> Have a good weekend > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> Jadques > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Daniel confirmed it's terminated. I turned to UpTimeRobot > >>>>>> which > >>>>>>>> is free and seems as well good :) > >>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> This thread started on user ML but I don't want to bother > >>>>>>> everyone > >>>>>>>> with technical details. > >>>>>>>>>>>>>>> I used my own @a.o email to create the monitoring. > >>>>> UpTimeRobot > >>>>>> is > >>>>>>>> certainly the best free monitoring tool, with some possibilities > >>>>> others > >>>>>>>> don't give. > >>>>>>>>>>>>>>> But the free version has an inconvenient. You can only > check > >>>>>>> every > >>>>>>>> 5 mins and when the instances restart it takes more than 5 mins > >> each. > >>>>>>>>>>>>>>> So everyday I get a down an up alerts for each. I have > >>>>> switched > >>>>>>> to > >>>>>>>> montastic.com. > >>>>>>>>>>>>>>> I was wondering if we don't want to share that here. > >>>>>>>>>>>>>>> We could then have these alerts here and any committer, > using > >>>>>> the > >>>>>>>> info inhttps://svn.apache.org/repos/asf/ofbiz/tools/demo-backup > >>>>> could > >>>>>>>> handle issues. > >>>>>>>>>>>>>>> It seems better, isn'it? > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> > >>> > >> > > |
|
Administrator
|
Mind you, I already asked when the infra stopped providing it. Then Daniel (Gruno) told me I could use the free tool his company provided. I used that
for months, but it's now discontinued. So I had to find the one which suited me best and I explained that at the start of this thread. The problem for me is how to share the burden and especially have more brains around it. It's years I handle the demos alone... Jacques Le 25/08/2018 à 11:07, Pierre Smits a écrit : > Since we're talking about our demo instances on the infrastructure of the > ASF I suggest getting in touch with INFRA and work out a solution with them > that favours both parties. They surely will have monitoring solutions in > place and can advice on what is achievable. > > > > Best regards, > > Pierre Smits > > Apache Trafodion <https://trafodion.apache.org>, Vice President > Apache Directory <https://directory.apache.org>, PMC Member > Apache Incubator <https://incubator.apache.org>, committer > *Apache OFBiz <https://ofbiz.apache.org>, contributor (without privileges) > since 2008* > Apache Steve <https://steve.apache.org>, committer > > > On Fri, Aug 24, 2018 at 4:36 PM Jacques Le Roux < > [hidden email]> wrote: > >> Agreed, I have used VisualVMin the past, it's a simple and efficient tool >> >> I have planned to make a VOTE about options if needed. Let's see if it >> will be necessary (consensus being preferred) >> >> Jacques >> >> >> Le 24/08/2018 à 16:06, Girish Vasmatkar a écrit : >>> Speaking of monitoring tools and if we don't want to go for third party >>> tools, we can also use VisualVM that comes bundled with Oracle JDK. It >> can >>> connect to the remote VM (OFBiz process) and start displaying various >>> information. >>> >>> Very minimal configuration is needed in the form of VM argument to allow >>> for remote monitoring. Also, to enable further analysis of what went >> wrong, >>> why JVM crashed etc, we should also dump heap as the JVM shuts down. >>> >>> Too many ways and too many options. Probably need to reach a unanimous >>> decision, IMO. >>> >>> Thanks and Best regards, >>> Girish Vasmatkar >>> >>> On Fri, Aug 24, 2018 at 4:56 PM Jacques Le Roux < >>> [hidden email]> wrote: >>> >>>> Thanks Michael, >>>> >>>> Best idea so far! >>>> >>>> Jacques >>>> >>>> >>>> Le 24/08/2018 à 11:08, Michael Brohl a écrit : >>>>> We are monitoring our OFBiz instances with JMX and self hosted Zabbix >>>> [1]. >>>>> Zabbix gives you a nice overview about the system health and metrics >>>> like memory consumption etc. It also sends out warnings (Email, SMS or >>>> else) >>>>> if metrics are exceeded (like CPU load or memory consumption) as well >> as >>>> the system is not accessible. >>>>> Looks like this: [2] >>>>> >>>>> There is no programming needed, just some configuration for JMX and >>>> Zabbix. >>>>> [1] https://www.zabbix.com/ >>>>> [2] >>>> https://www.ecomify.de/wp-content/uploads/2018/08/Zabbix_Monitoring.png >>>>> If we want to see why the demos crash, it might be useful. If we only >>>> want to monitor if the system is up, a simple cron job which sends a >>>>> might be enough... >>>>> >>>>> Regards, >>>>> >>>>> Michael Brohl >>>>> ecomify GmbH >>>>> www.ecomify.de >>>>> >>>>> >>>>> Am 24.08.18 um 10:07 schrieb Taher Alkhateeb: >>>>>> Okay all neat ideas, I'm not sure if the energy you will put into >>>> something >>>>>> like this is equal to the value produced but if you want to make this >>>>>> happen I would be happy to assist. >>>>>> >>>>>> How much time will it take to make something like this happen? I ask >>>>>> because it seems Jacques ia getting annoyed with these crashes and >> we'd >>>>>> like to help him out. >>>>>> >>>>>> On Fri, Aug 24, 2018, 10:59 AM Girish Vasmatkar < >>>>>> [hidden email]> wrote: >>>>>> >>>>>>> Hi Taher >>>>>>> >>>>>>> Please see my reply below in-line. >>>>>>> >>>>>>> On Fri, Aug 24, 2018 at 12:22 PM Taher Alkhateeb < >>>>>>> [hidden email]> >>>>>>> wrote: >>>>>>> >>>>>>>> Hi Girish, inline... >>>>>>>> >>>>>>>> On Thu, Aug 23, 2018, 7:25 PM Girish Vasmatkar < >>>>>>>> [hidden email]> wrote: >>>>>>>> >>>>>>>>> I had earlier replied to this thread but looks like the email did >> not >>>>>>> go >>>>>>>>> through. I had leaned towards using the tool (only just) instead of >>>> may >>>>>>>> be >>>>>>>>> having a CRON job or an alternative. >>>>>>>>> >>>>>>>>> What I feel now is that may be we can use JMX here and try to use >>>>>>> various >>>>>>>>> in build MBeans that provide CPU usage for the system and also for >>>> the >>>>>>>> JVM >>>>>>>>> process we are concerned about that is OFBiz instance. We should >> also >>>>>>> be >>>>>>>>> able to get the memory usage of the JVM and if reaches a particular >>>>>>>>> threshold we can be notified. >>>>>>>>> >>>>>>>> Do you have a PoC for all of this? >>>>>>>> >>>>>>> GV : I can have one ready; and there is going to be much doing >>>> involved. >>>>>>>>> In addition, I think we already add a shutdown hook to the JVM >>>>>>>> process... I >>>>>>>>> am not sure and have not used it much but may be we can use it to >>>> send >>>>>>>> some >>>>>>>>> notifications? Of course, it is applicable for graceful exits of >> JVM >>>>>>> only >>>>>>>>> and if you just happen to kill the process it won't be of much >> help. >>>>>>>> The shutdown hook is used for shutting down. I'm not sure what is >> the >>>>>>>> purpose of mentioning it here? >>>>>>>> >>>>>>> GV : The reason I mentioned shutdown hook was it can be used to >>>> send >>>>>>> notification (may be email) or anything per our needs indicating that >>>> the >>>>>>> demo process was shut down. Per my understanding, shutdown hook >>>> gets >>>>>>> called whenever JVM shuts down gracefully. Graceful word is very >>>> important >>>>>>> here because we won't be able to do much if someone just kills the >>>> process. >>>>>>> The only thing a shutdown hook will add to this is that we will be >>>> notified >>>>>>> then and there. >>>>>>> >>>>>>>>> Hope it makes sense and correct me if I am wrong. >>>>>>>> Well I'm struggling a bit. I didn't understand exactly what needs to >>>> be >>>>>>>> done? I see mixed topics about JMX, Mbeans, Memory monitors and >>>> shutdown >>>>>>>> hooks. First this seems to be more like coding than a tool, and >>>> second I >>>>>>>> have no idea how you want to implement this? >>>>>>>> >>>>>>> GV: Yes, it would mostly be coding rather than being a >> substitute >>>> for >>>>>>> the tool. My idea was that to have a timer service run within the JVM >>>> and >>>>>>> it access various MBeans for the CPU usage and Memory usages just for >>>> our >>>>>>> monitoring purpose and raise an alert if it reaches a threshold. It >> was >>>>>>> just to have a glance over how JVM is performing. The disadvantage? >> The >>>>>>> service will run in OFBiz JVM and there will be considerable amount >> of >>>>>>> coding involved. >>>>>>> >>>>>>>> My idea for example is simple: create a cronjob that checks the >> system >>>>>>>> periodically and if the demo process stopped, restart it (or maybe >>>>>>> rebuild >>>>>>>> and restart). To go with your suggestion we need to perhaps first >>>>>>>> understand it. >>>>>>>> >>>>>>> GV: There is nothing wrong with creating a CRON job, per se. The >>>> only >>>>>>> reason why I introduced MBeans in the mix was to be able to sort of >>>> having >>>>>>> OFBiz monitor itself within it's realm, hence use of MBeans. I >> believe >>>> a >>>>>>> CRON will be able to do it as well. I probably did not get that we >>>> probably >>>>>>> want something that take some action after the JVM has crashed and >> not >>>>>>> having something that monitors the process and alerts concerned >> parties >>>>>>> that the process is occupying more than say 2 GB or it's CPU usage >> has >>>>>>> spiked above 80%. >>>>>>> >>>>>>> All in all, I feel we should choose the solution based on what we >> want >>>> to >>>>>>> do and whether we want to take it further as well. I do not know what >>>> the >>>>>>> tool does now or whether it can build the system again and restart it >>>>>>> automatically. I also do not know what measures we take in such an >>>> event. I >>>>>>> agree CRON will be simplest of them all, but if the tool provides all >>>> of >>>>>>> these (be able to take corrective measures) and not just send >>>>>>> notifications, then it can also be worth it's salt. Yes, CRON will be >>>> more >>>>>>> technical way of achieving :) >>>>>>> >>>>>>> Thanks and Best regards, >>>>>>> Girish Vasmatkar >>>>>>> HotWax Systems >>>>>>> >>>>>>>>> Best regards, >>>>>>>>> Girish Vasmatkar >>>>>>>>> HotWax Systems >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, Aug 23, 2018 at 8:48 PM Jacques Le Roux < >>>>>>>>> [hidden email]> wrote: >>>>>>>>> >>>>>>>>>> Le 23/08/2018 à 14:04, Taher Alkhateeb a écrit : >>>>>>>>>>> I'm not sure why you're hanging this on me, >>>>>>>>>> Because you answered to the bait ;) >>>>>>>>>> >>>>>>>>>>> but sure I'm willing to >>>>>>>>>>> help. >>>>>>>>>> Thanks, much appreciated! >>>>>>>>>> >>>>>>>>>>> Can I get some information on how the crashes are happening and >>>>>>>>>>> how you're getting notified, and I will take it from there. >>>>>>>>>> I think after a crash it's mostly to use dumps there (we have >>>> several >>>>>>>>> from >>>>>>>>>> the recent pas) but I'm not sure they will help, and it takes time >>>> to >>>>>>>>>> analyse. >>>>>>>>>> >>>>>>>>>> In the past I took the time to analyse some of them and it was >>>>>>>>>> interesting. For instance in 2010 I found a bug in a Java version >> we >>>>>>>> were >>>>>>>>>> using and it >>>>>>>>>> helped me in a custom project I was also doing then: >>>>>>>>>> https://markmail.org/message/byu2ivjn7wckayzz >>>>>>>>>> >>>>>>>>>> Lastly it was mostly lack of memory, despite having 8GB now. I >>>>>>> created >>>>>>>>>> https://issues.apache.org/jira/browse/INFRA-16780 for that, but >> not >>>>>>>> sure >>>>>>>>>> it was >>>>>>>>>> the reason. At least we have less issues since. >>>>>>>>>> >>>>>>>>>> Before (months ago) the Infra was monitoring our demos and >> alerting >>>>>>> us >>>>>>>> by >>>>>>>>>> mail (you just had to subscribe). Unfortunately we are on our own >>>> for >>>>>>>>> that >>>>>>>>>> now, too much projects in the ASF... >>>>>>>>>> As as I said initially in this thread I'm currently using >>>>>>>> montastic.com >>>>>>>>>> for the email alerts. >>>>>>>>>> My idea when I started this thread was that it all depends on me, >>>> and >>>>>>>>>> that's bad. So I wanted people to be aware, you are much welcome. >>>>>>>>>> >>>>>>>>>> Jacques >>>>>>>>>>> On Thu, Aug 23, 2018 at 2:29 PM Jacques Le Roux >>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>> Yes we can, will you? >>>>>>>>>>>> >>>>>>>>>>>> Jacques >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Le 22/08/2018 à 19:29, Taher Alkhateeb a écrit : >>>>>>>>>>>>> Well, we can ask Infra for help, we can check available >>>>>>> solutions, >>>>>>>> we >>>>>>>>>>>>> can create a CRON script that checks things periodically, there >>>>>>> are >>>>>>>>>>>>> multiple ways to go about this. >>>>>>>>>>>>> >>>>>>>>>>>>> My personal preference is for a simple CRON script that takes >>>>>>> care >>>>>>>> of >>>>>>>>>> this. >>>>>>>>>>>>> On Wed, Aug 22, 2018 at 8:25 PM Jacques Le Roux >>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>> So you prefer that I'm the only one to take care of the demos >>>>>>> and >>>>>>>>> act >>>>>>>>>> on alerts? >>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le 22/08/2018 à 18:53, Taher Alkhateeb a écrit : >>>>>>>>>>>>>>> I prefer not to include any tools without proper analysis and >>>>>>>>>>>>>>> discussion first. Less is more. >>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 5:31 PM Jacques Le Roux >>>>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Should I consider no answers as a lazy consensus and should >> I >>>>>>>> send >>>>>>>>>> (rare) alerts to this ML? >>>>>>>>>>>>>>>> Without any answers I'll consider it a lazy consensus in 2 >>>>>>> days. >>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Le 17/08/2018 à 12:22, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>> Le 13/08/2018 à 18:21, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>> Le 12/08/2018 à 11:26, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> This morning I noticed the old demo was down and >> restarted >>>>>>> it >>>>>>>>>> after cleaning things. >>>>>>>>>>>>>>>>>>> Previously (still some weeks ago) Daniel Gruno's (from >>>>>>> Infra >>>>>>>>>> team) company was kindly providing us a mean to monitor our demos >>>> but >>>>>>>> it >>>>>>>>>> seems that >>>>>>>>>>>>>>>>>>> this mean is no longer available >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I have asked about it and will let you know about it... >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Have a good weekend >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Jadques >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Daniel confirmed it's terminated. I turned to UpTimeRobot >>>>>>>> which >>>>>>>>>> is free and seems as well good :) >>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> This thread started on user ML but I don't want to bother >>>>>>>>> everyone >>>>>>>>>> with technical details. >>>>>>>>>>>>>>>>> I used my own @a.o email to create the monitoring. >>>>>>> UpTimeRobot >>>>>>>> is >>>>>>>>>> certainly the best free monitoring tool, with some possibilities >>>>>>> others >>>>>>>>>> don't give. >>>>>>>>>>>>>>>>> But the free version has an inconvenient. You can only >> check >>>>>>>>> every >>>>>>>>>> 5 mins and when the instances restart it takes more than 5 mins >>>> each. >>>>>>>>>>>>>>>>> So everyday I get a down an up alerts for each. I have >>>>>>> switched >>>>>>>>> to >>>>>>>>>> montastic.com. >>>>>>>>>>>>>>>>> I was wondering if we don't want to share that here. >>>>>>>>>>>>>>>>> We could then have these alerts here and any committer, >> using >>>>>>>> the >>>>>>>>>> info inhttps://svn.apache.org/repos/asf/ofbiz/tools/demo-backup >>>>>>> could >>>>>>>>>> handle issues. >>>>>>>>>>>>>>>>> It seems better, isn'it? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >> |
|
I did a little bit of research and although there are many solutions
out there, the top two I shortlisted to based on many criteria (community, plugins, eco-system, features) are zabbix and nagios, and I list below the pros and cons from my perspective. Given that our needs are not too complex, I find my self leaning slightly towards zabbix. # nagios pros - mature and battle tested - massive plugin collection - highly customizable - Configuration can be stored in a revision system (config files) - No database, simpler # nagios cons - steep learning curve (everything is a config file) - The web interface is limited - because of the huge eco-system some plugins are abandoned or not well maintained - community is a bit fragmented with many forks out there (e.g. icinga, etc ...) # zabbix pros - Powerful web interface - Excellent template system that makes complex flows - Easy to deploy and configure - Easy to learn and use - More functionality OOTB # zabbix cons - More complex architecture with a database backend - Less customizable - Smaller community and eco-system, plugins not as numerous On Sat, Aug 25, 2018 at 12:30 PM Jacques Le Roux <[hidden email]> wrote: > > Mind you, I already asked when the infra stopped providing it. Then Daniel (Gruno) told me I could use the free tool his company provided. I used that > for months, but it's now discontinued. So I had to find the one which suited me best and I explained that at the start of this thread. > > The problem for me is how to share the burden and especially have more brains around it. It's years I handle the demos alone... > > Jacques > > Le 25/08/2018 à 11:07, Pierre Smits a écrit : > > Since we're talking about our demo instances on the infrastructure of the > > ASF I suggest getting in touch with INFRA and work out a solution with them > > that favours both parties. They surely will have monitoring solutions in > > place and can advice on what is achievable. > > > > > > > > Best regards, > > > > Pierre Smits > > > > Apache Trafodion <https://trafodion.apache.org>, Vice President > > Apache Directory <https://directory.apache.org>, PMC Member > > Apache Incubator <https://incubator.apache.org>, committer > > *Apache OFBiz <https://ofbiz.apache.org>, contributor (without privileges) > > since 2008* > > Apache Steve <https://steve.apache.org>, committer > > > > > > On Fri, Aug 24, 2018 at 4:36 PM Jacques Le Roux < > > [hidden email]> wrote: > > > >> Agreed, I have used VisualVMin the past, it's a simple and efficient tool > >> > >> I have planned to make a VOTE about options if needed. Let's see if it > >> will be necessary (consensus being preferred) > >> > >> Jacques > >> > >> > >> Le 24/08/2018 à 16:06, Girish Vasmatkar a écrit : > >>> Speaking of monitoring tools and if we don't want to go for third party > >>> tools, we can also use VisualVM that comes bundled with Oracle JDK. It > >> can > >>> connect to the remote VM (OFBiz process) and start displaying various > >>> information. > >>> > >>> Very minimal configuration is needed in the form of VM argument to allow > >>> for remote monitoring. Also, to enable further analysis of what went > >> wrong, > >>> why JVM crashed etc, we should also dump heap as the JVM shuts down. > >>> > >>> Too many ways and too many options. Probably need to reach a unanimous > >>> decision, IMO. > >>> > >>> Thanks and Best regards, > >>> Girish Vasmatkar > >>> > >>> On Fri, Aug 24, 2018 at 4:56 PM Jacques Le Roux < > >>> [hidden email]> wrote: > >>> > >>>> Thanks Michael, > >>>> > >>>> Best idea so far! > >>>> > >>>> Jacques > >>>> > >>>> > >>>> Le 24/08/2018 à 11:08, Michael Brohl a écrit : > >>>>> We are monitoring our OFBiz instances with JMX and self hosted Zabbix > >>>> [1]. > >>>>> Zabbix gives you a nice overview about the system health and metrics > >>>> like memory consumption etc. It also sends out warnings (Email, SMS or > >>>> else) > >>>>> if metrics are exceeded (like CPU load or memory consumption) as well > >> as > >>>> the system is not accessible. > >>>>> Looks like this: [2] > >>>>> > >>>>> There is no programming needed, just some configuration for JMX and > >>>> Zabbix. > >>>>> [1] https://www.zabbix.com/ > >>>>> [2] > >>>> https://www.ecomify.de/wp-content/uploads/2018/08/Zabbix_Monitoring.png > >>>>> If we want to see why the demos crash, it might be useful. If we only > >>>> want to monitor if the system is up, a simple cron job which sends a > >>>>> might be enough... > >>>>> > >>>>> Regards, > >>>>> > >>>>> Michael Brohl > >>>>> ecomify GmbH > >>>>> www.ecomify.de > >>>>> > >>>>> > >>>>> Am 24.08.18 um 10:07 schrieb Taher Alkhateeb: > >>>>>> Okay all neat ideas, I'm not sure if the energy you will put into > >>>> something > >>>>>> like this is equal to the value produced but if you want to make this > >>>>>> happen I would be happy to assist. > >>>>>> > >>>>>> How much time will it take to make something like this happen? I ask > >>>>>> because it seems Jacques ia getting annoyed with these crashes and > >> we'd > >>>>>> like to help him out. > >>>>>> > >>>>>> On Fri, Aug 24, 2018, 10:59 AM Girish Vasmatkar < > >>>>>> [hidden email]> wrote: > >>>>>> > >>>>>>> Hi Taher > >>>>>>> > >>>>>>> Please see my reply below in-line. > >>>>>>> > >>>>>>> On Fri, Aug 24, 2018 at 12:22 PM Taher Alkhateeb < > >>>>>>> [hidden email]> > >>>>>>> wrote: > >>>>>>> > >>>>>>>> Hi Girish, inline... > >>>>>>>> > >>>>>>>> On Thu, Aug 23, 2018, 7:25 PM Girish Vasmatkar < > >>>>>>>> [hidden email]> wrote: > >>>>>>>> > >>>>>>>>> I had earlier replied to this thread but looks like the email did > >> not > >>>>>>> go > >>>>>>>>> through. I had leaned towards using the tool (only just) instead of > >>>> may > >>>>>>>> be > >>>>>>>>> having a CRON job or an alternative. > >>>>>>>>> > >>>>>>>>> What I feel now is that may be we can use JMX here and try to use > >>>>>>> various > >>>>>>>>> in build MBeans that provide CPU usage for the system and also for > >>>> the > >>>>>>>> JVM > >>>>>>>>> process we are concerned about that is OFBiz instance. We should > >> also > >>>>>>> be > >>>>>>>>> able to get the memory usage of the JVM and if reaches a particular > >>>>>>>>> threshold we can be notified. > >>>>>>>>> > >>>>>>>> Do you have a PoC for all of this? > >>>>>>>> > >>>>>>> GV : I can have one ready; and there is going to be much doing > >>>> involved. > >>>>>>>>> In addition, I think we already add a shutdown hook to the JVM > >>>>>>>> process... I > >>>>>>>>> am not sure and have not used it much but may be we can use it to > >>>> send > >>>>>>>> some > >>>>>>>>> notifications? Of course, it is applicable for graceful exits of > >> JVM > >>>>>>> only > >>>>>>>>> and if you just happen to kill the process it won't be of much > >> help. > >>>>>>>> The shutdown hook is used for shutting down. I'm not sure what is > >> the > >>>>>>>> purpose of mentioning it here? > >>>>>>>> > >>>>>>> GV : The reason I mentioned shutdown hook was it can be used to > >>>> send > >>>>>>> notification (may be email) or anything per our needs indicating that > >>>> the > >>>>>>> demo process was shut down. Per my understanding, shutdown hook > >>>> gets > >>>>>>> called whenever JVM shuts down gracefully. Graceful word is very > >>>> important > >>>>>>> here because we won't be able to do much if someone just kills the > >>>> process. > >>>>>>> The only thing a shutdown hook will add to this is that we will be > >>>> notified > >>>>>>> then and there. > >>>>>>> > >>>>>>>>> Hope it makes sense and correct me if I am wrong. > >>>>>>>> Well I'm struggling a bit. I didn't understand exactly what needs to > >>>> be > >>>>>>>> done? I see mixed topics about JMX, Mbeans, Memory monitors and > >>>> shutdown > >>>>>>>> hooks. First this seems to be more like coding than a tool, and > >>>> second I > >>>>>>>> have no idea how you want to implement this? > >>>>>>>> > >>>>>>> GV: Yes, it would mostly be coding rather than being a > >> substitute > >>>> for > >>>>>>> the tool. My idea was that to have a timer service run within the JVM > >>>> and > >>>>>>> it access various MBeans for the CPU usage and Memory usages just for > >>>> our > >>>>>>> monitoring purpose and raise an alert if it reaches a threshold. It > >> was > >>>>>>> just to have a glance over how JVM is performing. The disadvantage? > >> The > >>>>>>> service will run in OFBiz JVM and there will be considerable amount > >> of > >>>>>>> coding involved. > >>>>>>> > >>>>>>>> My idea for example is simple: create a cronjob that checks the > >> system > >>>>>>>> periodically and if the demo process stopped, restart it (or maybe > >>>>>>> rebuild > >>>>>>>> and restart). To go with your suggestion we need to perhaps first > >>>>>>>> understand it. > >>>>>>>> > >>>>>>> GV: There is nothing wrong with creating a CRON job, per se. The > >>>> only > >>>>>>> reason why I introduced MBeans in the mix was to be able to sort of > >>>> having > >>>>>>> OFBiz monitor itself within it's realm, hence use of MBeans. I > >> believe > >>>> a > >>>>>>> CRON will be able to do it as well. I probably did not get that we > >>>> probably > >>>>>>> want something that take some action after the JVM has crashed and > >> not > >>>>>>> having something that monitors the process and alerts concerned > >> parties > >>>>>>> that the process is occupying more than say 2 GB or it's CPU usage > >> has > >>>>>>> spiked above 80%. > >>>>>>> > >>>>>>> All in all, I feel we should choose the solution based on what we > >> want > >>>> to > >>>>>>> do and whether we want to take it further as well. I do not know what > >>>> the > >>>>>>> tool does now or whether it can build the system again and restart it > >>>>>>> automatically. I also do not know what measures we take in such an > >>>> event. I > >>>>>>> agree CRON will be simplest of them all, but if the tool provides all > >>>> of > >>>>>>> these (be able to take corrective measures) and not just send > >>>>>>> notifications, then it can also be worth it's salt. Yes, CRON will be > >>>> more > >>>>>>> technical way of achieving :) > >>>>>>> > >>>>>>> Thanks and Best regards, > >>>>>>> Girish Vasmatkar > >>>>>>> HotWax Systems > >>>>>>> > >>>>>>>>> Best regards, > >>>>>>>>> Girish Vasmatkar > >>>>>>>>> HotWax Systems > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> On Thu, Aug 23, 2018 at 8:48 PM Jacques Le Roux < > >>>>>>>>> [hidden email]> wrote: > >>>>>>>>> > >>>>>>>>>> Le 23/08/2018 à 14:04, Taher Alkhateeb a écrit : > >>>>>>>>>>> I'm not sure why you're hanging this on me, > >>>>>>>>>> Because you answered to the bait ;) > >>>>>>>>>> > >>>>>>>>>>> but sure I'm willing to > >>>>>>>>>>> help. > >>>>>>>>>> Thanks, much appreciated! > >>>>>>>>>> > >>>>>>>>>>> Can I get some information on how the crashes are happening and > >>>>>>>>>>> how you're getting notified, and I will take it from there. > >>>>>>>>>> I think after a crash it's mostly to use dumps there (we have > >>>> several > >>>>>>>>> from > >>>>>>>>>> the recent pas) but I'm not sure they will help, and it takes time > >>>> to > >>>>>>>>>> analyse. > >>>>>>>>>> > >>>>>>>>>> In the past I took the time to analyse some of them and it was > >>>>>>>>>> interesting. For instance in 2010 I found a bug in a Java version > >> we > >>>>>>>> were > >>>>>>>>>> using and it > >>>>>>>>>> helped me in a custom project I was also doing then: > >>>>>>>>>> https://markmail.org/message/byu2ivjn7wckayzz > >>>>>>>>>> > >>>>>>>>>> Lastly it was mostly lack of memory, despite having 8GB now. I > >>>>>>> created > >>>>>>>>>> https://issues.apache.org/jira/browse/INFRA-16780 for that, but > >> not > >>>>>>>> sure > >>>>>>>>>> it was > >>>>>>>>>> the reason. At least we have less issues since. > >>>>>>>>>> > >>>>>>>>>> Before (months ago) the Infra was monitoring our demos and > >> alerting > >>>>>>> us > >>>>>>>> by > >>>>>>>>>> mail (you just had to subscribe). Unfortunately we are on our own > >>>> for > >>>>>>>>> that > >>>>>>>>>> now, too much projects in the ASF... > >>>>>>>>>> As as I said initially in this thread I'm currently using > >>>>>>>> montastic.com > >>>>>>>>>> for the email alerts. > >>>>>>>>>> My idea when I started this thread was that it all depends on me, > >>>> and > >>>>>>>>>> that's bad. So I wanted people to be aware, you are much welcome. > >>>>>>>>>> > >>>>>>>>>> Jacques > >>>>>>>>>>> On Thu, Aug 23, 2018 at 2:29 PM Jacques Le Roux > >>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>> Yes we can, will you? > >>>>>>>>>>>> > >>>>>>>>>>>> Jacques > >>>>>>>>>>>> > >>>>>>>>>>>> > >>>>>>>>>>>> Le 22/08/2018 à 19:29, Taher Alkhateeb a écrit : > >>>>>>>>>>>>> Well, we can ask Infra for help, we can check available > >>>>>>> solutions, > >>>>>>>> we > >>>>>>>>>>>>> can create a CRON script that checks things periodically, there > >>>>>>> are > >>>>>>>>>>>>> multiple ways to go about this. > >>>>>>>>>>>>> > >>>>>>>>>>>>> My personal preference is for a simple CRON script that takes > >>>>>>> care > >>>>>>>> of > >>>>>>>>>> this. > >>>>>>>>>>>>> On Wed, Aug 22, 2018 at 8:25 PM Jacques Le Roux > >>>>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>>>> So you prefer that I'm the only one to take care of the demos > >>>>>>> and > >>>>>>>>> act > >>>>>>>>>> on alerts? > >>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Le 22/08/2018 à 18:53, Taher Alkhateeb a écrit : > >>>>>>>>>>>>>>> I prefer not to include any tools without proper analysis and > >>>>>>>>>>>>>>> discussion first. Less is more. > >>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 5:31 PM Jacques Le Roux > >>>>>>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>>>>>> Hi, > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Should I consider no answers as a lazy consensus and should > >> I > >>>>>>>> send > >>>>>>>>>> (rare) alerts to this ML? > >>>>>>>>>>>>>>>> Without any answers I'll consider it a lazy consensus in 2 > >>>>>>> days. > >>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Le 17/08/2018 à 12:22, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>>> Le 13/08/2018 à 18:21, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>>>> Le 12/08/2018 à 11:26, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>>>>> Hi, > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> This morning I noticed the old demo was down and > >> restarted > >>>>>>> it > >>>>>>>>>> after cleaning things. > >>>>>>>>>>>>>>>>>>> Previously (still some weeks ago) Daniel Gruno's (from > >>>>>>> Infra > >>>>>>>>>> team) company was kindly providing us a mean to monitor our demos > >>>> but > >>>>>>>> it > >>>>>>>>>> seems that > >>>>>>>>>>>>>>>>>>> this mean is no longer available > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> I have asked about it and will let you know about it... > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Have a good weekend > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Jadques > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> Daniel confirmed it's terminated. I turned to UpTimeRobot > >>>>>>>> which > >>>>>>>>>> is free and seems as well good :) > >>>>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> This thread started on user ML but I don't want to bother > >>>>>>>>> everyone > >>>>>>>>>> with technical details. > >>>>>>>>>>>>>>>>> I used my own @a.o email to create the monitoring. > >>>>>>> UpTimeRobot > >>>>>>>> is > >>>>>>>>>> certainly the best free monitoring tool, with some possibilities > >>>>>>> others > >>>>>>>>>> don't give. > >>>>>>>>>>>>>>>>> But the free version has an inconvenient. You can only > >> check > >>>>>>>>> every > >>>>>>>>>> 5 mins and when the instances restart it takes more than 5 mins > >>>> each. > >>>>>>>>>>>>>>>>> So everyday I get a down an up alerts for each. I have > >>>>>>> switched > >>>>>>>>> to > >>>>>>>>>> montastic.com. > >>>>>>>>>>>>>>>>> I was wondering if we don't want to share that here. > >>>>>>>>>>>>>>>>> We could then have these alerts here and any committer, > >> using > >>>>>>>> the > >>>>>>>>>> info inhttps://svn.apache.org/repos/asf/ofbiz/tools/demo-backup > >>>>>>> could > >>>>>>>>>> handle issues. > >>>>>>>>>>>>>>>>> It seems better, isn'it? > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>> > >> > |
|
Administrator
|
Thanks Taher,
Why did you not consider VisualVM and JMX (apart that it would be more work)? Do we need a complex tool to do this task (report alerts, allow simple post-mortem)? Have you something else in mind? Also, as I said at https://markmail.org/message/byu2ivjn7wckayzz After using Eclipse Mat, I have used https://www.yourkit.com/ in the past after reading http://people.apache.org/~markt/presentations/2010-11-04-Memory-Leaks-60mins.pdf from Mark Thomas https://whimsy4.apache.org/roster/committer/markt It's really the most complete tool I used then, I guess it's still. I checked committers can still ask for a free license: https://www.yourkit.com/purchase/#os_license So that's how I worked so far: I waited for an alert (sometimes none in months, sometimes several in a week) and then got to the VM to analyse the dump with the YourKit Java Profiler. As you certainly understood I'm especially asking for help doing something similar. Not much because I don't want to do it, or I'm too busy, but because we need to share, not the burden, but the role. Jacques Le 25/08/2018 à 13:46, Taher Alkhateeb a écrit : > I did a little bit of research and although there are many solutions > out there, the top two I shortlisted to based on many criteria > (community, plugins, eco-system, features) are zabbix and nagios, and > I list below the pros and cons from my perspective. > > Given that our needs are not too complex, I find my self leaning > slightly towards zabbix. > > # nagios pros > - mature and battle tested > - massive plugin collection > - highly customizable > - Configuration can be stored in a revision system (config files) > - No database, simpler > > # nagios cons > - steep learning curve (everything is a config file) > - The web interface is limited > - because of the huge eco-system some plugins are abandoned or not > well maintained > - community is a bit fragmented with many forks out there (e.g. icinga, etc ...) > > # zabbix pros > - Powerful web interface > - Excellent template system that makes complex flows > - Easy to deploy and configure > - Easy to learn and use > - More functionality OOTB > > # zabbix cons > - More complex architecture with a database backend > - Less customizable > - Smaller community and eco-system, plugins not as numerous > > On Sat, Aug 25, 2018 at 12:30 PM Jacques Le Roux > <[hidden email]> wrote: >> Mind you, I already asked when the infra stopped providing it. Then Daniel (Gruno) told me I could use the free tool his company provided. I used that >> for months, but it's now discontinued. So I had to find the one which suited me best and I explained that at the start of this thread. >> >> The problem for me is how to share the burden and especially have more brains around it. It's years I handle the demos alone... >> >> Jacques >> >> Le 25/08/2018 à 11:07, Pierre Smits a écrit : >>> Since we're talking about our demo instances on the infrastructure of the >>> ASF I suggest getting in touch with INFRA and work out a solution with them >>> that favours both parties. They surely will have monitoring solutions in >>> place and can advice on what is achievable. >>> >>> >>> >>> Best regards, >>> >>> Pierre Smits >>> >>> Apache Trafodion <https://trafodion.apache.org>, Vice President >>> Apache Directory <https://directory.apache.org>, PMC Member >>> Apache Incubator <https://incubator.apache.org>, committer >>> *Apache OFBiz <https://ofbiz.apache.org>, contributor (without privileges) >>> since 2008* >>> Apache Steve <https://steve.apache.org>, committer >>> >>> >>> On Fri, Aug 24, 2018 at 4:36 PM Jacques Le Roux < >>> [hidden email]> wrote: >>> >>>> Agreed, I have used VisualVMin the past, it's a simple and efficient tool >>>> >>>> I have planned to make a VOTE about options if needed. Let's see if it >>>> will be necessary (consensus being preferred) >>>> >>>> Jacques >>>> >>>> >>>> Le 24/08/2018 à 16:06, Girish Vasmatkar a écrit : >>>>> Speaking of monitoring tools and if we don't want to go for third party >>>>> tools, we can also use VisualVM that comes bundled with Oracle JDK. It >>>> can >>>>> connect to the remote VM (OFBiz process) and start displaying various >>>>> information. >>>>> >>>>> Very minimal configuration is needed in the form of VM argument to allow >>>>> for remote monitoring. Also, to enable further analysis of what went >>>> wrong, >>>>> why JVM crashed etc, we should also dump heap as the JVM shuts down. >>>>> >>>>> Too many ways and too many options. Probably need to reach a unanimous >>>>> decision, IMO. >>>>> >>>>> Thanks and Best regards, >>>>> Girish Vasmatkar >>>>> >>>>> On Fri, Aug 24, 2018 at 4:56 PM Jacques Le Roux < >>>>> [hidden email]> wrote: >>>>> >>>>>> Thanks Michael, >>>>>> >>>>>> Best idea so far! >>>>>> >>>>>> Jacques >>>>>> >>>>>> >>>>>> Le 24/08/2018 à 11:08, Michael Brohl a écrit : >>>>>>> We are monitoring our OFBiz instances with JMX and self hosted Zabbix >>>>>> [1]. >>>>>>> Zabbix gives you a nice overview about the system health and metrics >>>>>> like memory consumption etc. It also sends out warnings (Email, SMS or >>>>>> else) >>>>>>> if metrics are exceeded (like CPU load or memory consumption) as well >>>> as >>>>>> the system is not accessible. >>>>>>> Looks like this: [2] >>>>>>> >>>>>>> There is no programming needed, just some configuration for JMX and >>>>>> Zabbix. >>>>>>> [1] https://www.zabbix.com/ >>>>>>> [2] >>>>>> https://www.ecomify.de/wp-content/uploads/2018/08/Zabbix_Monitoring.png >>>>>>> If we want to see why the demos crash, it might be useful. If we only >>>>>> want to monitor if the system is up, a simple cron job which sends a >>>>>>> might be enough... >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Michael Brohl >>>>>>> ecomify GmbH >>>>>>> www.ecomify.de >>>>>>> >>>>>>> >>>>>>> Am 24.08.18 um 10:07 schrieb Taher Alkhateeb: >>>>>>>> Okay all neat ideas, I'm not sure if the energy you will put into >>>>>> something >>>>>>>> like this is equal to the value produced but if you want to make this >>>>>>>> happen I would be happy to assist. >>>>>>>> >>>>>>>> How much time will it take to make something like this happen? I ask >>>>>>>> because it seems Jacques ia getting annoyed with these crashes and >>>> we'd >>>>>>>> like to help him out. >>>>>>>> >>>>>>>> On Fri, Aug 24, 2018, 10:59 AM Girish Vasmatkar < >>>>>>>> [hidden email]> wrote: >>>>>>>> >>>>>>>>> Hi Taher >>>>>>>>> >>>>>>>>> Please see my reply below in-line. >>>>>>>>> >>>>>>>>> On Fri, Aug 24, 2018 at 12:22 PM Taher Alkhateeb < >>>>>>>>> [hidden email]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> Hi Girish, inline... >>>>>>>>>> >>>>>>>>>> On Thu, Aug 23, 2018, 7:25 PM Girish Vasmatkar < >>>>>>>>>> [hidden email]> wrote: >>>>>>>>>> >>>>>>>>>>> I had earlier replied to this thread but looks like the email did >>>> not >>>>>>>>> go >>>>>>>>>>> through. I had leaned towards using the tool (only just) instead of >>>>>> may >>>>>>>>>> be >>>>>>>>>>> having a CRON job or an alternative. >>>>>>>>>>> >>>>>>>>>>> What I feel now is that may be we can use JMX here and try to use >>>>>>>>> various >>>>>>>>>>> in build MBeans that provide CPU usage for the system and also for >>>>>> the >>>>>>>>>> JVM >>>>>>>>>>> process we are concerned about that is OFBiz instance. We should >>>> also >>>>>>>>> be >>>>>>>>>>> able to get the memory usage of the JVM and if reaches a particular >>>>>>>>>>> threshold we can be notified. >>>>>>>>>>> >>>>>>>>>> Do you have a PoC for all of this? >>>>>>>>>> >>>>>>>>> GV : I can have one ready; and there is going to be much doing >>>>>> involved. >>>>>>>>>>> In addition, I think we already add a shutdown hook to the JVM >>>>>>>>>> process... I >>>>>>>>>>> am not sure and have not used it much but may be we can use it to >>>>>> send >>>>>>>>>> some >>>>>>>>>>> notifications? Of course, it is applicable for graceful exits of >>>> JVM >>>>>>>>> only >>>>>>>>>>> and if you just happen to kill the process it won't be of much >>>> help. >>>>>>>>>> The shutdown hook is used for shutting down. I'm not sure what is >>>> the >>>>>>>>>> purpose of mentioning it here? >>>>>>>>>> >>>>>>>>> GV : The reason I mentioned shutdown hook was it can be used to >>>>>> send >>>>>>>>> notification (may be email) or anything per our needs indicating that >>>>>> the >>>>>>>>> demo process was shut down. Per my understanding, shutdown hook >>>>>> gets >>>>>>>>> called whenever JVM shuts down gracefully. Graceful word is very >>>>>> important >>>>>>>>> here because we won't be able to do much if someone just kills the >>>>>> process. >>>>>>>>> The only thing a shutdown hook will add to this is that we will be >>>>>> notified >>>>>>>>> then and there. >>>>>>>>> >>>>>>>>>>> Hope it makes sense and correct me if I am wrong. >>>>>>>>>> Well I'm struggling a bit. I didn't understand exactly what needs to >>>>>> be >>>>>>>>>> done? I see mixed topics about JMX, Mbeans, Memory monitors and >>>>>> shutdown >>>>>>>>>> hooks. First this seems to be more like coding than a tool, and >>>>>> second I >>>>>>>>>> have no idea how you want to implement this? >>>>>>>>>> >>>>>>>>> GV: Yes, it would mostly be coding rather than being a >>>> substitute >>>>>> for >>>>>>>>> the tool. My idea was that to have a timer service run within the JVM >>>>>> and >>>>>>>>> it access various MBeans for the CPU usage and Memory usages just for >>>>>> our >>>>>>>>> monitoring purpose and raise an alert if it reaches a threshold. It >>>> was >>>>>>>>> just to have a glance over how JVM is performing. The disadvantage? >>>> The >>>>>>>>> service will run in OFBiz JVM and there will be considerable amount >>>> of >>>>>>>>> coding involved. >>>>>>>>> >>>>>>>>>> My idea for example is simple: create a cronjob that checks the >>>> system >>>>>>>>>> periodically and if the demo process stopped, restart it (or maybe >>>>>>>>> rebuild >>>>>>>>>> and restart). To go with your suggestion we need to perhaps first >>>>>>>>>> understand it. >>>>>>>>>> >>>>>>>>> GV: There is nothing wrong with creating a CRON job, per se. The >>>>>> only >>>>>>>>> reason why I introduced MBeans in the mix was to be able to sort of >>>>>> having >>>>>>>>> OFBiz monitor itself within it's realm, hence use of MBeans. I >>>> believe >>>>>> a >>>>>>>>> CRON will be able to do it as well. I probably did not get that we >>>>>> probably >>>>>>>>> want something that take some action after the JVM has crashed and >>>> not >>>>>>>>> having something that monitors the process and alerts concerned >>>> parties >>>>>>>>> that the process is occupying more than say 2 GB or it's CPU usage >>>> has >>>>>>>>> spiked above 80%. >>>>>>>>> >>>>>>>>> All in all, I feel we should choose the solution based on what we >>>> want >>>>>> to >>>>>>>>> do and whether we want to take it further as well. I do not know what >>>>>> the >>>>>>>>> tool does now or whether it can build the system again and restart it >>>>>>>>> automatically. I also do not know what measures we take in such an >>>>>> event. I >>>>>>>>> agree CRON will be simplest of them all, but if the tool provides all >>>>>> of >>>>>>>>> these (be able to take corrective measures) and not just send >>>>>>>>> notifications, then it can also be worth it's salt. Yes, CRON will be >>>>>> more >>>>>>>>> technical way of achieving :) >>>>>>>>> >>>>>>>>> Thanks and Best regards, >>>>>>>>> Girish Vasmatkar >>>>>>>>> HotWax Systems >>>>>>>>> >>>>>>>>>>> Best regards, >>>>>>>>>>> Girish Vasmatkar >>>>>>>>>>> HotWax Systems >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Thu, Aug 23, 2018 at 8:48 PM Jacques Le Roux < >>>>>>>>>>> [hidden email]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Le 23/08/2018 à 14:04, Taher Alkhateeb a écrit : >>>>>>>>>>>>> I'm not sure why you're hanging this on me, >>>>>>>>>>>> Because you answered to the bait ;) >>>>>>>>>>>> >>>>>>>>>>>>> but sure I'm willing to >>>>>>>>>>>>> help. >>>>>>>>>>>> Thanks, much appreciated! >>>>>>>>>>>> >>>>>>>>>>>>> Can I get some information on how the crashes are happening and >>>>>>>>>>>>> how you're getting notified, and I will take it from there. >>>>>>>>>>>> I think after a crash it's mostly to use dumps there (we have >>>>>> several >>>>>>>>>>> from >>>>>>>>>>>> the recent pas) but I'm not sure they will help, and it takes time >>>>>> to >>>>>>>>>>>> analyse. >>>>>>>>>>>> >>>>>>>>>>>> In the past I took the time to analyse some of them and it was >>>>>>>>>>>> interesting. For instance in 2010 I found a bug in a Java version >>>> we >>>>>>>>>> were >>>>>>>>>>>> using and it >>>>>>>>>>>> helped me in a custom project I was also doing then: >>>>>>>>>>>> https://markmail.org/message/byu2ivjn7wckayzz >>>>>>>>>>>> >>>>>>>>>>>> Lastly it was mostly lack of memory, despite having 8GB now. I >>>>>>>>> created >>>>>>>>>>>> https://issues.apache.org/jira/browse/INFRA-16780 for that, but >>>> not >>>>>>>>>> sure >>>>>>>>>>>> it was >>>>>>>>>>>> the reason. At least we have less issues since. >>>>>>>>>>>> >>>>>>>>>>>> Before (months ago) the Infra was monitoring our demos and >>>> alerting >>>>>>>>> us >>>>>>>>>> by >>>>>>>>>>>> mail (you just had to subscribe). Unfortunately we are on our own >>>>>> for >>>>>>>>>>> that >>>>>>>>>>>> now, too much projects in the ASF... >>>>>>>>>>>> As as I said initially in this thread I'm currently using >>>>>>>>>> montastic.com >>>>>>>>>>>> for the email alerts. >>>>>>>>>>>> My idea when I started this thread was that it all depends on me, >>>>>> and >>>>>>>>>>>> that's bad. So I wanted people to be aware, you are much welcome. >>>>>>>>>>>> >>>>>>>>>>>> Jacques >>>>>>>>>>>>> On Thu, Aug 23, 2018 at 2:29 PM Jacques Le Roux >>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>> Yes we can, will you? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le 22/08/2018 à 19:29, Taher Alkhateeb a écrit : >>>>>>>>>>>>>>> Well, we can ask Infra for help, we can check available >>>>>>>>> solutions, >>>>>>>>>> we >>>>>>>>>>>>>>> can create a CRON script that checks things periodically, there >>>>>>>>> are >>>>>>>>>>>>>>> multiple ways to go about this. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> My personal preference is for a simple CRON script that takes >>>>>>>>> care >>>>>>>>>> of >>>>>>>>>>>> this. >>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 8:25 PM Jacques Le Roux >>>>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>>>> So you prefer that I'm the only one to take care of the demos >>>>>>>>> and >>>>>>>>>>> act >>>>>>>>>>>> on alerts? >>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Le 22/08/2018 à 18:53, Taher Alkhateeb a écrit : >>>>>>>>>>>>>>>>> I prefer not to include any tools without proper analysis and >>>>>>>>>>>>>>>>> discussion first. Less is more. >>>>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 5:31 PM Jacques Le Roux >>>>>>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Should I consider no answers as a lazy consensus and should >>>> I >>>>>>>>>> send >>>>>>>>>>>> (rare) alerts to this ML? >>>>>>>>>>>>>>>>>> Without any answers I'll consider it a lazy consensus in 2 >>>>>>>>> days. >>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Le 17/08/2018 à 12:22, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>>> Le 13/08/2018 à 18:21, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>>>> Le 12/08/2018 à 11:26, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> This morning I noticed the old demo was down and >>>> restarted >>>>>>>>> it >>>>>>>>>>>> after cleaning things. >>>>>>>>>>>>>>>>>>>>> Previously (still some weeks ago) Daniel Gruno's (from >>>>>>>>> Infra >>>>>>>>>>>> team) company was kindly providing us a mean to monitor our demos >>>>>> but >>>>>>>>>> it >>>>>>>>>>>> seems that >>>>>>>>>>>>>>>>>>>>> this mean is no longer available >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I have asked about it and will let you know about it... >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Have a good weekend >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Jadques >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Daniel confirmed it's terminated. I turned to UpTimeRobot >>>>>>>>>> which >>>>>>>>>>>> is free and seems as well good :) >>>>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> This thread started on user ML but I don't want to bother >>>>>>>>>>> everyone >>>>>>>>>>>> with technical details. >>>>>>>>>>>>>>>>>>> I used my own @a.o email to create the monitoring. >>>>>>>>> UpTimeRobot >>>>>>>>>> is >>>>>>>>>>>> certainly the best free monitoring tool, with some possibilities >>>>>>>>> others >>>>>>>>>>>> don't give. >>>>>>>>>>>>>>>>>>> But the free version has an inconvenient. You can only >>>> check >>>>>>>>>>> every >>>>>>>>>>>> 5 mins and when the instances restart it takes more than 5 mins >>>>>> each. >>>>>>>>>>>>>>>>>>> So everyday I get a down an up alerts for each. I have >>>>>>>>> switched >>>>>>>>>>> to >>>>>>>>>>>> montastic.com. >>>>>>>>>>>>>>>>>>> I was wondering if we don't want to share that here. >>>>>>>>>>>>>>>>>>> We could then have these alerts here and any committer, >>>> using >>>>>>>>>> the >>>>>>>>>>>> info inhttps://svn.apache.org/repos/asf/ofbiz/tools/demo-backup >>>>>>>>> could >>>>>>>>>>>> handle issues. >>>>>>>>>>>>>>>>>>> It seems better, isn'it? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> |
|
|
VisualVM is a desktop application, JMX is a specification and set of
libraries / specs. So I think both are not suitable. I'm not going to read through your email with all these links as that's confusing and boring. You asked for my help, and now you're again participating in this thread (the most!) and pushing your own opinion. Why did you ask me to take on this task when you cut through with all these suggestions. If you already have the time as you mentioned then I recommend not to drag me into initiatives and waste my time. On Sun, Aug 26, 2018 at 12:56 PM Jacques Le Roux <[hidden email]> wrote: > > Thanks Taher, > > Why did you not consider VisualVM and JMX (apart that it would be more work)? > > Do we need a complex tool to do this task (report alerts, allow simple post-mortem)? Have you something else in mind? > > Also, as I said at https://markmail.org/message/byu2ivjn7wckayzz > > After using Eclipse Mat, I have used https://www.yourkit.com/ in the past after reading > http://people.apache.org/~markt/presentations/2010-11-04-Memory-Leaks-60mins.pdf from Mark Thomas https://whimsy4.apache.org/roster/committer/markt > > It's really the most complete tool I used then, I guess it's still. I checked committers can still ask for a free license: > https://www.yourkit.com/purchase/#os_license > > So that's how I worked so far: I waited for an alert (sometimes none in months, sometimes several in a week) and then got to the VM to analyse the > dump with the YourKit Java Profiler. > > As you certainly understood I'm especially asking for help doing something similar. Not much because I don't want to do it, or I'm too busy, but > because we need to share, not the burden, but the role. > > Jacques > > Le 25/08/2018 à 13:46, Taher Alkhateeb a écrit : > > I did a little bit of research and although there are many solutions > > out there, the top two I shortlisted to based on many criteria > > (community, plugins, eco-system, features) are zabbix and nagios, and > > I list below the pros and cons from my perspective. > > > > Given that our needs are not too complex, I find my self leaning > > slightly towards zabbix. > > > > # nagios pros > > - mature and battle tested > > - massive plugin collection > > - highly customizable > > - Configuration can be stored in a revision system (config files) > > - No database, simpler > > > > # nagios cons > > - steep learning curve (everything is a config file) > > - The web interface is limited > > - because of the huge eco-system some plugins are abandoned or not > > well maintained > > - community is a bit fragmented with many forks out there (e.g. icinga, etc ...) > > > > # zabbix pros > > - Powerful web interface > > - Excellent template system that makes complex flows > > - Easy to deploy and configure > > - Easy to learn and use > > - More functionality OOTB > > > > # zabbix cons > > - More complex architecture with a database backend > > - Less customizable > > - Smaller community and eco-system, plugins not as numerous > > > > On Sat, Aug 25, 2018 at 12:30 PM Jacques Le Roux > > <[hidden email]> wrote: > >> Mind you, I already asked when the infra stopped providing it. Then Daniel (Gruno) told me I could use the free tool his company provided. I used that > >> for months, but it's now discontinued. So I had to find the one which suited me best and I explained that at the start of this thread. > >> > >> The problem for me is how to share the burden and especially have more brains around it. It's years I handle the demos alone... > >> > >> Jacques > >> > >> Le 25/08/2018 à 11:07, Pierre Smits a écrit : > >>> Since we're talking about our demo instances on the infrastructure of the > >>> ASF I suggest getting in touch with INFRA and work out a solution with them > >>> that favours both parties. They surely will have monitoring solutions in > >>> place and can advice on what is achievable. > >>> > >>> > >>> > >>> Best regards, > >>> > >>> Pierre Smits > >>> > >>> Apache Trafodion <https://trafodion.apache.org>, Vice President > >>> Apache Directory <https://directory.apache.org>, PMC Member > >>> Apache Incubator <https://incubator.apache.org>, committer > >>> *Apache OFBiz <https://ofbiz.apache.org>, contributor (without privileges) > >>> since 2008* > >>> Apache Steve <https://steve.apache.org>, committer > >>> > >>> > >>> On Fri, Aug 24, 2018 at 4:36 PM Jacques Le Roux < > >>> [hidden email]> wrote: > >>> > >>>> Agreed, I have used VisualVMin the past, it's a simple and efficient tool > >>>> > >>>> I have planned to make a VOTE about options if needed. Let's see if it > >>>> will be necessary (consensus being preferred) > >>>> > >>>> Jacques > >>>> > >>>> > >>>> Le 24/08/2018 à 16:06, Girish Vasmatkar a écrit : > >>>>> Speaking of monitoring tools and if we don't want to go for third party > >>>>> tools, we can also use VisualVM that comes bundled with Oracle JDK. It > >>>> can > >>>>> connect to the remote VM (OFBiz process) and start displaying various > >>>>> information. > >>>>> > >>>>> Very minimal configuration is needed in the form of VM argument to allow > >>>>> for remote monitoring. Also, to enable further analysis of what went > >>>> wrong, > >>>>> why JVM crashed etc, we should also dump heap as the JVM shuts down. > >>>>> > >>>>> Too many ways and too many options. Probably need to reach a unanimous > >>>>> decision, IMO. > >>>>> > >>>>> Thanks and Best regards, > >>>>> Girish Vasmatkar > >>>>> > >>>>> On Fri, Aug 24, 2018 at 4:56 PM Jacques Le Roux < > >>>>> [hidden email]> wrote: > >>>>> > >>>>>> Thanks Michael, > >>>>>> > >>>>>> Best idea so far! > >>>>>> > >>>>>> Jacques > >>>>>> > >>>>>> > >>>>>> Le 24/08/2018 à 11:08, Michael Brohl a écrit : > >>>>>>> We are monitoring our OFBiz instances with JMX and self hosted Zabbix > >>>>>> [1]. > >>>>>>> Zabbix gives you a nice overview about the system health and metrics > >>>>>> like memory consumption etc. It also sends out warnings (Email, SMS or > >>>>>> else) > >>>>>>> if metrics are exceeded (like CPU load or memory consumption) as well > >>>> as > >>>>>> the system is not accessible. > >>>>>>> Looks like this: [2] > >>>>>>> > >>>>>>> There is no programming needed, just some configuration for JMX and > >>>>>> Zabbix. > >>>>>>> [1] https://www.zabbix.com/ > >>>>>>> [2] > >>>>>> https://www.ecomify.de/wp-content/uploads/2018/08/Zabbix_Monitoring.png > >>>>>>> If we want to see why the demos crash, it might be useful. If we only > >>>>>> want to monitor if the system is up, a simple cron job which sends a > >>>>>>> might be enough... > >>>>>>> > >>>>>>> Regards, > >>>>>>> > >>>>>>> Michael Brohl > >>>>>>> ecomify GmbH > >>>>>>> www.ecomify.de > >>>>>>> > >>>>>>> > >>>>>>> Am 24.08.18 um 10:07 schrieb Taher Alkhateeb: > >>>>>>>> Okay all neat ideas, I'm not sure if the energy you will put into > >>>>>> something > >>>>>>>> like this is equal to the value produced but if you want to make this > >>>>>>>> happen I would be happy to assist. > >>>>>>>> > >>>>>>>> How much time will it take to make something like this happen? I ask > >>>>>>>> because it seems Jacques ia getting annoyed with these crashes and > >>>> we'd > >>>>>>>> like to help him out. > >>>>>>>> > >>>>>>>> On Fri, Aug 24, 2018, 10:59 AM Girish Vasmatkar < > >>>>>>>> [hidden email]> wrote: > >>>>>>>> > >>>>>>>>> Hi Taher > >>>>>>>>> > >>>>>>>>> Please see my reply below in-line. > >>>>>>>>> > >>>>>>>>> On Fri, Aug 24, 2018 at 12:22 PM Taher Alkhateeb < > >>>>>>>>> [hidden email]> > >>>>>>>>> wrote: > >>>>>>>>> > >>>>>>>>>> Hi Girish, inline... > >>>>>>>>>> > >>>>>>>>>> On Thu, Aug 23, 2018, 7:25 PM Girish Vasmatkar < > >>>>>>>>>> [hidden email]> wrote: > >>>>>>>>>> > >>>>>>>>>>> I had earlier replied to this thread but looks like the email did > >>>> not > >>>>>>>>> go > >>>>>>>>>>> through. I had leaned towards using the tool (only just) instead of > >>>>>> may > >>>>>>>>>> be > >>>>>>>>>>> having a CRON job or an alternative. > >>>>>>>>>>> > >>>>>>>>>>> What I feel now is that may be we can use JMX here and try to use > >>>>>>>>> various > >>>>>>>>>>> in build MBeans that provide CPU usage for the system and also for > >>>>>> the > >>>>>>>>>> JVM > >>>>>>>>>>> process we are concerned about that is OFBiz instance. We should > >>>> also > >>>>>>>>> be > >>>>>>>>>>> able to get the memory usage of the JVM and if reaches a particular > >>>>>>>>>>> threshold we can be notified. > >>>>>>>>>>> > >>>>>>>>>> Do you have a PoC for all of this? > >>>>>>>>>> > >>>>>>>>> GV : I can have one ready; and there is going to be much doing > >>>>>> involved. > >>>>>>>>>>> In addition, I think we already add a shutdown hook to the JVM > >>>>>>>>>> process... I > >>>>>>>>>>> am not sure and have not used it much but may be we can use it to > >>>>>> send > >>>>>>>>>> some > >>>>>>>>>>> notifications? Of course, it is applicable for graceful exits of > >>>> JVM > >>>>>>>>> only > >>>>>>>>>>> and if you just happen to kill the process it won't be of much > >>>> help. > >>>>>>>>>> The shutdown hook is used for shutting down. I'm not sure what is > >>>> the > >>>>>>>>>> purpose of mentioning it here? > >>>>>>>>>> > >>>>>>>>> GV : The reason I mentioned shutdown hook was it can be used to > >>>>>> send > >>>>>>>>> notification (may be email) or anything per our needs indicating that > >>>>>> the > >>>>>>>>> demo process was shut down. Per my understanding, shutdown hook > >>>>>> gets > >>>>>>>>> called whenever JVM shuts down gracefully. Graceful word is very > >>>>>> important > >>>>>>>>> here because we won't be able to do much if someone just kills the > >>>>>> process. > >>>>>>>>> The only thing a shutdown hook will add to this is that we will be > >>>>>> notified > >>>>>>>>> then and there. > >>>>>>>>> > >>>>>>>>>>> Hope it makes sense and correct me if I am wrong. > >>>>>>>>>> Well I'm struggling a bit. I didn't understand exactly what needs to > >>>>>> be > >>>>>>>>>> done? I see mixed topics about JMX, Mbeans, Memory monitors and > >>>>>> shutdown > >>>>>>>>>> hooks. First this seems to be more like coding than a tool, and > >>>>>> second I > >>>>>>>>>> have no idea how you want to implement this? > >>>>>>>>>> > >>>>>>>>> GV: Yes, it would mostly be coding rather than being a > >>>> substitute > >>>>>> for > >>>>>>>>> the tool. My idea was that to have a timer service run within the JVM > >>>>>> and > >>>>>>>>> it access various MBeans for the CPU usage and Memory usages just for > >>>>>> our > >>>>>>>>> monitoring purpose and raise an alert if it reaches a threshold. It > >>>> was > >>>>>>>>> just to have a glance over how JVM is performing. The disadvantage? > >>>> The > >>>>>>>>> service will run in OFBiz JVM and there will be considerable amount > >>>> of > >>>>>>>>> coding involved. > >>>>>>>>> > >>>>>>>>>> My idea for example is simple: create a cronjob that checks the > >>>> system > >>>>>>>>>> periodically and if the demo process stopped, restart it (or maybe > >>>>>>>>> rebuild > >>>>>>>>>> and restart). To go with your suggestion we need to perhaps first > >>>>>>>>>> understand it. > >>>>>>>>>> > >>>>>>>>> GV: There is nothing wrong with creating a CRON job, per se. The > >>>>>> only > >>>>>>>>> reason why I introduced MBeans in the mix was to be able to sort of > >>>>>> having > >>>>>>>>> OFBiz monitor itself within it's realm, hence use of MBeans. I > >>>> believe > >>>>>> a > >>>>>>>>> CRON will be able to do it as well. I probably did not get that we > >>>>>> probably > >>>>>>>>> want something that take some action after the JVM has crashed and > >>>> not > >>>>>>>>> having something that monitors the process and alerts concerned > >>>> parties > >>>>>>>>> that the process is occupying more than say 2 GB or it's CPU usage > >>>> has > >>>>>>>>> spiked above 80%. > >>>>>>>>> > >>>>>>>>> All in all, I feel we should choose the solution based on what we > >>>> want > >>>>>> to > >>>>>>>>> do and whether we want to take it further as well. I do not know what > >>>>>> the > >>>>>>>>> tool does now or whether it can build the system again and restart it > >>>>>>>>> automatically. I also do not know what measures we take in such an > >>>>>> event. I > >>>>>>>>> agree CRON will be simplest of them all, but if the tool provides all > >>>>>> of > >>>>>>>>> these (be able to take corrective measures) and not just send > >>>>>>>>> notifications, then it can also be worth it's salt. Yes, CRON will be > >>>>>> more > >>>>>>>>> technical way of achieving :) > >>>>>>>>> > >>>>>>>>> Thanks and Best regards, > >>>>>>>>> Girish Vasmatkar > >>>>>>>>> HotWax Systems > >>>>>>>>> > >>>>>>>>>>> Best regards, > >>>>>>>>>>> Girish Vasmatkar > >>>>>>>>>>> HotWax Systems > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> On Thu, Aug 23, 2018 at 8:48 PM Jacques Le Roux < > >>>>>>>>>>> [hidden email]> wrote: > >>>>>>>>>>> > >>>>>>>>>>>> Le 23/08/2018 à 14:04, Taher Alkhateeb a écrit : > >>>>>>>>>>>>> I'm not sure why you're hanging this on me, > >>>>>>>>>>>> Because you answered to the bait ;) > >>>>>>>>>>>> > >>>>>>>>>>>>> but sure I'm willing to > >>>>>>>>>>>>> help. > >>>>>>>>>>>> Thanks, much appreciated! > >>>>>>>>>>>> > >>>>>>>>>>>>> Can I get some information on how the crashes are happening and > >>>>>>>>>>>>> how you're getting notified, and I will take it from there. > >>>>>>>>>>>> I think after a crash it's mostly to use dumps there (we have > >>>>>> several > >>>>>>>>>>> from > >>>>>>>>>>>> the recent pas) but I'm not sure they will help, and it takes time > >>>>>> to > >>>>>>>>>>>> analyse. > >>>>>>>>>>>> > >>>>>>>>>>>> In the past I took the time to analyse some of them and it was > >>>>>>>>>>>> interesting. For instance in 2010 I found a bug in a Java version > >>>> we > >>>>>>>>>> were > >>>>>>>>>>>> using and it > >>>>>>>>>>>> helped me in a custom project I was also doing then: > >>>>>>>>>>>> https://markmail.org/message/byu2ivjn7wckayzz > >>>>>>>>>>>> > >>>>>>>>>>>> Lastly it was mostly lack of memory, despite having 8GB now. I > >>>>>>>>> created > >>>>>>>>>>>> https://issues.apache.org/jira/browse/INFRA-16780 for that, but > >>>> not > >>>>>>>>>> sure > >>>>>>>>>>>> it was > >>>>>>>>>>>> the reason. At least we have less issues since. > >>>>>>>>>>>> > >>>>>>>>>>>> Before (months ago) the Infra was monitoring our demos and > >>>> alerting > >>>>>>>>> us > >>>>>>>>>> by > >>>>>>>>>>>> mail (you just had to subscribe). Unfortunately we are on our own > >>>>>> for > >>>>>>>>>>> that > >>>>>>>>>>>> now, too much projects in the ASF... > >>>>>>>>>>>> As as I said initially in this thread I'm currently using > >>>>>>>>>> montastic.com > >>>>>>>>>>>> for the email alerts. > >>>>>>>>>>>> My idea when I started this thread was that it all depends on me, > >>>>>> and > >>>>>>>>>>>> that's bad. So I wanted people to be aware, you are much welcome. > >>>>>>>>>>>> > >>>>>>>>>>>> Jacques > >>>>>>>>>>>>> On Thu, Aug 23, 2018 at 2:29 PM Jacques Le Roux > >>>>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>>>> Yes we can, will you? > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> Le 22/08/2018 à 19:29, Taher Alkhateeb a écrit : > >>>>>>>>>>>>>>> Well, we can ask Infra for help, we can check available > >>>>>>>>> solutions, > >>>>>>>>>> we > >>>>>>>>>>>>>>> can create a CRON script that checks things periodically, there > >>>>>>>>> are > >>>>>>>>>>>>>>> multiple ways to go about this. > >>>>>>>>>>>>>>> > >>>>>>>>>>>>>>> My personal preference is for a simple CRON script that takes > >>>>>>>>> care > >>>>>>>>>> of > >>>>>>>>>>>> this. > >>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 8:25 PM Jacques Le Roux > >>>>>>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>>>>>> So you prefer that I'm the only one to take care of the demos > >>>>>>>>> and > >>>>>>>>>>> act > >>>>>>>>>>>> on alerts? > >>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>> Le 22/08/2018 à 18:53, Taher Alkhateeb a écrit : > >>>>>>>>>>>>>>>>> I prefer not to include any tools without proper analysis and > >>>>>>>>>>>>>>>>> discussion first. Less is more. > >>>>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 5:31 PM Jacques Le Roux > >>>>>>>>>>>>>>>>> <[hidden email]> wrote: > >>>>>>>>>>>>>>>>>> Hi, > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> Should I consider no answers as a lazy consensus and should > >>>> I > >>>>>>>>>> send > >>>>>>>>>>>> (rare) alerts to this ML? > >>>>>>>>>>>>>>>>>> Without any answers I'll consider it a lazy consensus in 2 > >>>>>>>>> days. > >>>>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>> Le 17/08/2018 à 12:22, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>>>>> Le 13/08/2018 à 18:21, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>>>>>> Le 12/08/2018 à 11:26, Jacques Le Roux a écrit : > >>>>>>>>>>>>>>>>>>>>> Hi, > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> This morning I noticed the old demo was down and > >>>> restarted > >>>>>>>>> it > >>>>>>>>>>>> after cleaning things. > >>>>>>>>>>>>>>>>>>>>> Previously (still some weeks ago) Daniel Gruno's (from > >>>>>>>>> Infra > >>>>>>>>>>>> team) company was kindly providing us a mean to monitor our demos > >>>>>> but > >>>>>>>>>> it > >>>>>>>>>>>> seems that > >>>>>>>>>>>>>>>>>>>>> this mean is no longer available > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> I have asked about it and will let you know about it... > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> Have a good weekend > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> Jadques > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>> Daniel confirmed it's terminated. I turned to UpTimeRobot > >>>>>>>>>> which > >>>>>>>>>>>> is free and seems as well good :) > >>>>>>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> This thread started on user ML but I don't want to bother > >>>>>>>>>>> everyone > >>>>>>>>>>>> with technical details. > >>>>>>>>>>>>>>>>>>> I used my own @a.o email to create the monitoring. > >>>>>>>>> UpTimeRobot > >>>>>>>>>> is > >>>>>>>>>>>> certainly the best free monitoring tool, with some possibilities > >>>>>>>>> others > >>>>>>>>>>>> don't give. > >>>>>>>>>>>>>>>>>>> But the free version has an inconvenient. You can only > >>>> check > >>>>>>>>>>> every > >>>>>>>>>>>> 5 mins and when the instances restart it takes more than 5 mins > >>>>>> each. > >>>>>>>>>>>>>>>>>>> So everyday I get a down an up alerts for each. I have > >>>>>>>>> switched > >>>>>>>>>>> to > >>>>>>>>>>>> montastic.com. > >>>>>>>>>>>>>>>>>>> I was wondering if we don't want to share that here. > >>>>>>>>>>>>>>>>>>> We could then have these alerts here and any committer, > >>>> using > >>>>>>>>>> the > >>>>>>>>>>>> info inhttps://svn.apache.org/repos/asf/ofbiz/tools/demo-backup > >>>>>>>>> could > >>>>>>>>>>>> handle issues. > >>>>>>>>>>>>>>>>>>> It seems better, isn'it? > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> Jacques > >>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>> > |
|
Administrator
|
Le 26/08/2018 à 12:52, Taher Alkhateeb a écrit :
> VisualVM is a desktop application, So is YourKit, as long as they are accessible and free and to any committer I don't see the problem. Can't you install that on your machine to help? > JMX is a specification and set of > libraries / specs. So I think both are not suitable. VisualVM and JMXwas suggestted by Girish Vasmatkar, we can use a desktop app, why not? > I'm not going to > read through your email with all these links as that's confusing and > boring. It's just references, to better explain/sustain my opinion. You can ignore it, but it's not going in the right direction. Are we not here to participate, exchange, and build a consensus? > You asked for my help, I did rather ask the community for it helps. You don't see my point, I should not be the sole to maintain the demos. Not because I'm tired of it, but because it belongs to the community. > and now you're again participating in this > thread (the most!) and pushing your own opinion. We all do that everytime, that's how we build a consensus. > Why did you ask me to > take on this task when you cut through with all these suggestions. Actually I thanked you for your analysis on the 2 web monitoring tools you did. It's a good start to build a consensus. But you were not alone to answer... > If > you already have the time as you mentioned then I recommend not to > drag me into initiatives and waste my time. No comment Jacques > On Sun, Aug 26, 2018 at 12:56 PM Jacques Le Roux > <[hidden email]> wrote: >> Thanks Taher, >> >> Why did you not consider VisualVM and JMX (apart that it would be more work)? >> >> Do we need a complex tool to do this task (report alerts, allow simple post-mortem)? Have you something else in mind? >> >> Also, as I said at https://markmail.org/message/byu2ivjn7wckayzz >> >> After using Eclipse Mat, I have used https://www.yourkit.com/ in the past after reading >> http://people.apache.org/~markt/presentations/2010-11-04-Memory-Leaks-60mins.pdf from Mark Thomas https://whimsy4.apache.org/roster/committer/markt >> >> It's really the most complete tool I used then, I guess it's still. I checked committers can still ask for a free license: >> https://www.yourkit.com/purchase/#os_license >> >> So that's how I worked so far: I waited for an alert (sometimes none in months, sometimes several in a week) and then got to the VM to analyse the >> dump with the YourKit Java Profiler. >> >> As you certainly understood I'm especially asking for help doing something similar. Not much because I don't want to do it, or I'm too busy, but >> because we need to share, not the burden, but the role. >> >> Jacques >> >> Le 25/08/2018 à 13:46, Taher Alkhateeb a écrit : >>> I did a little bit of research and although there are many solutions >>> out there, the top two I shortlisted to based on many criteria >>> (community, plugins, eco-system, features) are zabbix and nagios, and >>> I list below the pros and cons from my perspective. >>> >>> Given that our needs are not too complex, I find my self leaning >>> slightly towards zabbix. >>> >>> # nagios pros >>> - mature and battle tested >>> - massive plugin collection >>> - highly customizable >>> - Configuration can be stored in a revision system (config files) >>> - No database, simpler >>> >>> # nagios cons >>> - steep learning curve (everything is a config file) >>> - The web interface is limited >>> - because of the huge eco-system some plugins are abandoned or not >>> well maintained >>> - community is a bit fragmented with many forks out there (e.g. icinga, etc ...) >>> >>> # zabbix pros >>> - Powerful web interface >>> - Excellent template system that makes complex flows >>> - Easy to deploy and configure >>> - Easy to learn and use >>> - More functionality OOTB >>> >>> # zabbix cons >>> - More complex architecture with a database backend >>> - Less customizable >>> - Smaller community and eco-system, plugins not as numerous >>> >>> On Sat, Aug 25, 2018 at 12:30 PM Jacques Le Roux >>> <[hidden email]> wrote: >>>> Mind you, I already asked when the infra stopped providing it. Then Daniel (Gruno) told me I could use the free tool his company provided. I used that >>>> for months, but it's now discontinued. So I had to find the one which suited me best and I explained that at the start of this thread. >>>> >>>> The problem for me is how to share the burden and especially have more brains around it. It's years I handle the demos alone... >>>> >>>> Jacques >>>> >>>> Le 25/08/2018 à 11:07, Pierre Smits a écrit : >>>>> Since we're talking about our demo instances on the infrastructure of the >>>>> ASF I suggest getting in touch with INFRA and work out a solution with them >>>>> that favours both parties. They surely will have monitoring solutions in >>>>> place and can advice on what is achievable. >>>>> >>>>> >>>>> >>>>> Best regards, >>>>> >>>>> Pierre Smits >>>>> >>>>> Apache Trafodion <https://trafodion.apache.org>, Vice President >>>>> Apache Directory <https://directory.apache.org>, PMC Member >>>>> Apache Incubator <https://incubator.apache.org>, committer >>>>> *Apache OFBiz <https://ofbiz.apache.org>, contributor (without privileges) >>>>> since 2008* >>>>> Apache Steve <https://steve.apache.org>, committer >>>>> >>>>> >>>>> On Fri, Aug 24, 2018 at 4:36 PM Jacques Le Roux < >>>>> [hidden email]> wrote: >>>>> >>>>>> Agreed, I have used VisualVMin the past, it's a simple and efficient tool >>>>>> >>>>>> I have planned to make a VOTE about options if needed. Let's see if it >>>>>> will be necessary (consensus being preferred) >>>>>> >>>>>> Jacques >>>>>> >>>>>> >>>>>> Le 24/08/2018 à 16:06, Girish Vasmatkar a écrit : >>>>>>> Speaking of monitoring tools and if we don't want to go for third party >>>>>>> tools, we can also use VisualVM that comes bundled with Oracle JDK. It >>>>>> can >>>>>>> connect to the remote VM (OFBiz process) and start displaying various >>>>>>> information. >>>>>>> >>>>>>> Very minimal configuration is needed in the form of VM argument to allow >>>>>>> for remote monitoring. Also, to enable further analysis of what went >>>>>> wrong, >>>>>>> why JVM crashed etc, we should also dump heap as the JVM shuts down. >>>>>>> >>>>>>> Too many ways and too many options. Probably need to reach a unanimous >>>>>>> decision, IMO. >>>>>>> >>>>>>> Thanks and Best regards, >>>>>>> Girish Vasmatkar >>>>>>> >>>>>>> On Fri, Aug 24, 2018 at 4:56 PM Jacques Le Roux < >>>>>>> [hidden email]> wrote: >>>>>>> >>>>>>>> Thanks Michael, >>>>>>>> >>>>>>>> Best idea so far! >>>>>>>> >>>>>>>> Jacques >>>>>>>> >>>>>>>> >>>>>>>> Le 24/08/2018 à 11:08, Michael Brohl a écrit : >>>>>>>>> We are monitoring our OFBiz instances with JMX and self hosted Zabbix >>>>>>>> [1]. >>>>>>>>> Zabbix gives you a nice overview about the system health and metrics >>>>>>>> like memory consumption etc. It also sends out warnings (Email, SMS or >>>>>>>> else) >>>>>>>>> if metrics are exceeded (like CPU load or memory consumption) as well >>>>>> as >>>>>>>> the system is not accessible. >>>>>>>>> Looks like this: [2] >>>>>>>>> >>>>>>>>> There is no programming needed, just some configuration for JMX and >>>>>>>> Zabbix. >>>>>>>>> [1] https://www.zabbix.com/ >>>>>>>>> [2] >>>>>>>> https://www.ecomify.de/wp-content/uploads/2018/08/Zabbix_Monitoring.png >>>>>>>>> If we want to see why the demos crash, it might be useful. If we only >>>>>>>> want to monitor if the system is up, a simple cron job which sends a >>>>>>>>> might be enough... >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> >>>>>>>>> Michael Brohl >>>>>>>>> ecomify GmbH >>>>>>>>> www.ecomify.de >>>>>>>>> >>>>>>>>> >>>>>>>>> Am 24.08.18 um 10:07 schrieb Taher Alkhateeb: >>>>>>>>>> Okay all neat ideas, I'm not sure if the energy you will put into >>>>>>>> something >>>>>>>>>> like this is equal to the value produced but if you want to make this >>>>>>>>>> happen I would be happy to assist. >>>>>>>>>> >>>>>>>>>> How much time will it take to make something like this happen? I ask >>>>>>>>>> because it seems Jacques ia getting annoyed with these crashes and >>>>>> we'd >>>>>>>>>> like to help him out. >>>>>>>>>> >>>>>>>>>> On Fri, Aug 24, 2018, 10:59 AM Girish Vasmatkar < >>>>>>>>>> [hidden email]> wrote: >>>>>>>>>> >>>>>>>>>>> Hi Taher >>>>>>>>>>> >>>>>>>>>>> Please see my reply below in-line. >>>>>>>>>>> >>>>>>>>>>> On Fri, Aug 24, 2018 at 12:22 PM Taher Alkhateeb < >>>>>>>>>>> [hidden email]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi Girish, inline... >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Aug 23, 2018, 7:25 PM Girish Vasmatkar < >>>>>>>>>>>> [hidden email]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> I had earlier replied to this thread but looks like the email did >>>>>> not >>>>>>>>>>> go >>>>>>>>>>>>> through. I had leaned towards using the tool (only just) instead of >>>>>>>> may >>>>>>>>>>>> be >>>>>>>>>>>>> having a CRON job or an alternative. >>>>>>>>>>>>> >>>>>>>>>>>>> What I feel now is that may be we can use JMX here and try to use >>>>>>>>>>> various >>>>>>>>>>>>> in build MBeans that provide CPU usage for the system and also for >>>>>>>> the >>>>>>>>>>>> JVM >>>>>>>>>>>>> process we are concerned about that is OFBiz instance. We should >>>>>> also >>>>>>>>>>> be >>>>>>>>>>>>> able to get the memory usage of the JVM and if reaches a particular >>>>>>>>>>>>> threshold we can be notified. >>>>>>>>>>>>> >>>>>>>>>>>> Do you have a PoC for all of this? >>>>>>>>>>>> >>>>>>>>>>> GV : I can have one ready; and there is going to be much doing >>>>>>>> involved. >>>>>>>>>>>>> In addition, I think we already add a shutdown hook to the JVM >>>>>>>>>>>> process... I >>>>>>>>>>>>> am not sure and have not used it much but may be we can use it to >>>>>>>> send >>>>>>>>>>>> some >>>>>>>>>>>>> notifications? Of course, it is applicable for graceful exits of >>>>>> JVM >>>>>>>>>>> only >>>>>>>>>>>>> and if you just happen to kill the process it won't be of much >>>>>> help. >>>>>>>>>>>> The shutdown hook is used for shutting down. I'm not sure what is >>>>>> the >>>>>>>>>>>> purpose of mentioning it here? >>>>>>>>>>>> >>>>>>>>>>> GV : The reason I mentioned shutdown hook was it can be used to >>>>>>>> send >>>>>>>>>>> notification (may be email) or anything per our needs indicating that >>>>>>>> the >>>>>>>>>>> demo process was shut down. Per my understanding, shutdown hook >>>>>>>> gets >>>>>>>>>>> called whenever JVM shuts down gracefully. Graceful word is very >>>>>>>> important >>>>>>>>>>> here because we won't be able to do much if someone just kills the >>>>>>>> process. >>>>>>>>>>> The only thing a shutdown hook will add to this is that we will be >>>>>>>> notified >>>>>>>>>>> then and there. >>>>>>>>>>> >>>>>>>>>>>>> Hope it makes sense and correct me if I am wrong. >>>>>>>>>>>> Well I'm struggling a bit. I didn't understand exactly what needs to >>>>>>>> be >>>>>>>>>>>> done? I see mixed topics about JMX, Mbeans, Memory monitors and >>>>>>>> shutdown >>>>>>>>>>>> hooks. First this seems to be more like coding than a tool, and >>>>>>>> second I >>>>>>>>>>>> have no idea how you want to implement this? >>>>>>>>>>>> >>>>>>>>>>> GV: Yes, it would mostly be coding rather than being a >>>>>> substitute >>>>>>>> for >>>>>>>>>>> the tool. My idea was that to have a timer service run within the JVM >>>>>>>> and >>>>>>>>>>> it access various MBeans for the CPU usage and Memory usages just for >>>>>>>> our >>>>>>>>>>> monitoring purpose and raise an alert if it reaches a threshold. It >>>>>> was >>>>>>>>>>> just to have a glance over how JVM is performing. The disadvantage? >>>>>> The >>>>>>>>>>> service will run in OFBiz JVM and there will be considerable amount >>>>>> of >>>>>>>>>>> coding involved. >>>>>>>>>>> >>>>>>>>>>>> My idea for example is simple: create a cronjob that checks the >>>>>> system >>>>>>>>>>>> periodically and if the demo process stopped, restart it (or maybe >>>>>>>>>>> rebuild >>>>>>>>>>>> and restart). To go with your suggestion we need to perhaps first >>>>>>>>>>>> understand it. >>>>>>>>>>>> >>>>>>>>>>> GV: There is nothing wrong with creating a CRON job, per se. The >>>>>>>> only >>>>>>>>>>> reason why I introduced MBeans in the mix was to be able to sort of >>>>>>>> having >>>>>>>>>>> OFBiz monitor itself within it's realm, hence use of MBeans. I >>>>>> believe >>>>>>>> a >>>>>>>>>>> CRON will be able to do it as well. I probably did not get that we >>>>>>>> probably >>>>>>>>>>> want something that take some action after the JVM has crashed and >>>>>> not >>>>>>>>>>> having something that monitors the process and alerts concerned >>>>>> parties >>>>>>>>>>> that the process is occupying more than say 2 GB or it's CPU usage >>>>>> has >>>>>>>>>>> spiked above 80%. >>>>>>>>>>> >>>>>>>>>>> All in all, I feel we should choose the solution based on what we >>>>>> want >>>>>>>> to >>>>>>>>>>> do and whether we want to take it further as well. I do not know what >>>>>>>> the >>>>>>>>>>> tool does now or whether it can build the system again and restart it >>>>>>>>>>> automatically. I also do not know what measures we take in such an >>>>>>>> event. I >>>>>>>>>>> agree CRON will be simplest of them all, but if the tool provides all >>>>>>>> of >>>>>>>>>>> these (be able to take corrective measures) and not just send >>>>>>>>>>> notifications, then it can also be worth it's salt. Yes, CRON will be >>>>>>>> more >>>>>>>>>>> technical way of achieving :) >>>>>>>>>>> >>>>>>>>>>> Thanks and Best regards, >>>>>>>>>>> Girish Vasmatkar >>>>>>>>>>> HotWax Systems >>>>>>>>>>> >>>>>>>>>>>>> Best regards, >>>>>>>>>>>>> Girish Vasmatkar >>>>>>>>>>>>> HotWax Systems >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, Aug 23, 2018 at 8:48 PM Jacques Le Roux < >>>>>>>>>>>>> [hidden email]> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Le 23/08/2018 à 14:04, Taher Alkhateeb a écrit : >>>>>>>>>>>>>>> I'm not sure why you're hanging this on me, >>>>>>>>>>>>>> Because you answered to the bait ;) >>>>>>>>>>>>>> >>>>>>>>>>>>>>> but sure I'm willing to >>>>>>>>>>>>>>> help. >>>>>>>>>>>>>> Thanks, much appreciated! >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Can I get some information on how the crashes are happening and >>>>>>>>>>>>>>> how you're getting notified, and I will take it from there. >>>>>>>>>>>>>> I think after a crash it's mostly to use dumps there (we have >>>>>>>> several >>>>>>>>>>>>> from >>>>>>>>>>>>>> the recent pas) but I'm not sure they will help, and it takes time >>>>>>>> to >>>>>>>>>>>>>> analyse. >>>>>>>>>>>>>> >>>>>>>>>>>>>> In the past I took the time to analyse some of them and it was >>>>>>>>>>>>>> interesting. For instance in 2010 I found a bug in a Java version >>>>>> we >>>>>>>>>>>> were >>>>>>>>>>>>>> using and it >>>>>>>>>>>>>> helped me in a custom project I was also doing then: >>>>>>>>>>>>>> https://markmail.org/message/byu2ivjn7wckayzz >>>>>>>>>>>>>> >>>>>>>>>>>>>> Lastly it was mostly lack of memory, despite having 8GB now. I >>>>>>>>>>> created >>>>>>>>>>>>>> https://issues.apache.org/jira/browse/INFRA-16780 for that, but >>>>>> not >>>>>>>>>>>> sure >>>>>>>>>>>>>> it was >>>>>>>>>>>>>> the reason. At least we have less issues since. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Before (months ago) the Infra was monitoring our demos and >>>>>> alerting >>>>>>>>>>> us >>>>>>>>>>>> by >>>>>>>>>>>>>> mail (you just had to subscribe). Unfortunately we are on our own >>>>>>>> for >>>>>>>>>>>>> that >>>>>>>>>>>>>> now, too much projects in the ASF... >>>>>>>>>>>>>> As as I said initially in this thread I'm currently using >>>>>>>>>>>> montastic.com >>>>>>>>>>>>>> for the email alerts. >>>>>>>>>>>>>> My idea when I started this thread was that it all depends on me, >>>>>>>> and >>>>>>>>>>>>>> that's bad. So I wanted people to be aware, you are much welcome. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>> On Thu, Aug 23, 2018 at 2:29 PM Jacques Le Roux >>>>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>>>> Yes we can, will you? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Le 22/08/2018 à 19:29, Taher Alkhateeb a écrit : >>>>>>>>>>>>>>>>> Well, we can ask Infra for help, we can check available >>>>>>>>>>> solutions, >>>>>>>>>>>> we >>>>>>>>>>>>>>>>> can create a CRON script that checks things periodically, there >>>>>>>>>>> are >>>>>>>>>>>>>>>>> multiple ways to go about this. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> My personal preference is for a simple CRON script that takes >>>>>>>>>>> care >>>>>>>>>>>> of >>>>>>>>>>>>>> this. >>>>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 8:25 PM Jacques Le Roux >>>>>>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>>>>>> So you prefer that I'm the only one to take care of the demos >>>>>>>>>>> and >>>>>>>>>>>>> act >>>>>>>>>>>>>> on alerts? >>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Le 22/08/2018 à 18:53, Taher Alkhateeb a écrit : >>>>>>>>>>>>>>>>>>> I prefer not to include any tools without proper analysis and >>>>>>>>>>>>>>>>>>> discussion first. Less is more. >>>>>>>>>>>>>>>>>>> On Wed, Aug 22, 2018 at 5:31 PM Jacques Le Roux >>>>>>>>>>>>>>>>>>> <[hidden email]> wrote: >>>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Should I consider no answers as a lazy consensus and should >>>>>> I >>>>>>>>>>>> send >>>>>>>>>>>>>> (rare) alerts to this ML? >>>>>>>>>>>>>>>>>>>> Without any answers I'll consider it a lazy consensus in 2 >>>>>>>>>>> days. >>>>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Le 17/08/2018 à 12:22, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>>>>> Le 13/08/2018 à 18:21, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>>>>>> Le 12/08/2018 à 11:26, Jacques Le Roux a écrit : >>>>>>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> This morning I noticed the old demo was down and >>>>>> restarted >>>>>>>>>>> it >>>>>>>>>>>>>> after cleaning things. >>>>>>>>>>>>>>>>>>>>>>> Previously (still some weeks ago) Daniel Gruno's (from >>>>>>>>>>> Infra >>>>>>>>>>>>>> team) company was kindly providing us a mean to monitor our demos >>>>>>>> but >>>>>>>>>>>> it >>>>>>>>>>>>>> seems that >>>>>>>>>>>>>>>>>>>>>>> this mean is no longer available >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I have asked about it and will let you know about it... >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Have a good weekend >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Jadques >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Daniel confirmed it's terminated. I turned to UpTimeRobot >>>>>>>>>>>> which >>>>>>>>>>>>>> is free and seems as well good :) >>>>>>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> This thread started on user ML but I don't want to bother >>>>>>>>>>>>> everyone >>>>>>>>>>>>>> with technical details. >>>>>>>>>>>>>>>>>>>>> I used my own @a.o email to create the monitoring. >>>>>>>>>>> UpTimeRobot >>>>>>>>>>>> is >>>>>>>>>>>>>> certainly the best free monitoring tool, with some possibilities >>>>>>>>>>> others >>>>>>>>>>>>>> don't give. >>>>>>>>>>>>>>>>>>>>> But the free version has an inconvenient. You can only >>>>>> check >>>>>>>>>>>>> every >>>>>>>>>>>>>> 5 mins and when the instances restart it takes more than 5 mins >>>>>>>> each. >>>>>>>>>>>>>>>>>>>>> So everyday I get a down an up alerts for each. I have >>>>>>>>>>> switched >>>>>>>>>>>>> to >>>>>>>>>>>>>> montastic.com. >>>>>>>>>>>>>>>>>>>>> I was wondering if we don't want to share that here. >>>>>>>>>>>>>>>>>>>>> We could then have these alerts here and any committer, >>>>>> using >>>>>>>>>>>> the >>>>>>>>>>>>>> info inhttps://svn.apache.org/repos/asf/ofbiz/tools/demo-backup >>>>>>>>>>> could >>>>>>>>>>>>>> handle issues. >>>>>>>>>>>>>>>>>>>>> It seems better, isn'it? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Jacques >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> |
«
Return to OFBiz - Dev
|
1 view|%1 views
| Free forum by Nabble | Edit this page |