error when paging after ebay order import

[nrieger]

I tried the clean-all and run-install and got some errors when loading data.

Unfortunately I do not have the output, it was a series of conversion error
from or to BigDecimal followed by errors on commit.

Maybe I messed up my installation.

A new checkout, build and run-install and the partymgr an facilitymgr is
available.

-----Ursprüngliche Nachricht-----
Von: BJ Freeman [mailto:[hidden email]]
Gesendet: Freitag, 23. Juli 2010 18:56
An: [hidden email]
Betreff: Re: AW: no permission for /partymgr, user admin

I have not run into that situation.
the ant clean-all removed the database that may have a status set from
some other operation.
it is always recommend to do a clean-all
before doing another run-install

erp aql sent the following on 7/23/2010 9:35 AM:
> It seems that if you do a second ant run-install without an ant clean in
between there is this boolean converter error:
>
>         Could not convert field value for the field: [hasPermission] to
the [Boolean] type for the value [true]:
> org.ofbiz.base.util.GeneralException: Conversion from java.lang.String to
Boolean not currently supported
> Exception: org.ofbiz.base.util.GeneralException
> Message: Conversion from java.lang.String to Boolean not currently
supported
>
> Because of this, the permission can not be checked and the message is
displayed "You do not have permission to view this page. ("PARTYMGR_VIEW" or
"PARTYMGR_ADMIN" needed)" even that the permissions are correctly
configured.
>
> The problem may be related to a possible bug on the conversion code. So,
the workaround seems to be: do an ant clean-all every time before ant
run-install.

>
> Regards,
> Cristian
>
> On 23/07/2010, at 6:15 PM, BJ Freeman wrote:
>
>> it sounnds like the install did not happen properly
>> do
>> ant clean-all
>> then
>> ant run-install
>> if your using linux
>> then use ./ant
>>
>> \\
>> \\Norbert Rieger sent the following on 7/23/2010 7:14 AM:
>>> I did a run-install.
>>>
>>> If no party is generated, how will I do this if I can not log in (I'm

new to

>>> OFBiz maybe I do not yet understand the whole context) ?
>>>
>>> -----Ursprüngliche Nachricht-----
>>> Von: BJ Freeman [mailto:[hidden email]]
>>> Gesendet: Freitag, 23. Juli 2010 16:01
>>> An: [hidden email]
>>> Betreff: Re: no permission for /partymgr, user admin
>>>
>>> did you do a
>>> ant run-install so you would have demo data?
>>> ant run-install-ext does not install any parties or log ins
>>> do a
>>> ant -p
>>> on how to create an admin account.
>>> this is only a log in with admin security it does not created any party.
>>>
>>> Norbert Rieger sent the following on 7/23/2010 6:07 AM:
>>>> Hi,
>>>>
>>>> I tried to log into /partymgr or /humanres with user admin and got the
>>> error
>>>> message:
>>>>
>>>> "You do not have permission to view this page. ("PARTYMGR_VIEW" or
>>>> "PARTYMGR_ADMIN" needed)"
>>>>
>>>> Doesn't admin has this permissions on default or do I have to log in

with

>>> a
>>>> different user ?
>>>>
>>>> How can I add this permissions to admin (or another user) ?
>>>>
>>>> Thanks a lot for your help.
>>>>
>>>> Norbert
>>>>
>>>> I'm working with trunk revision 967053 (build + run-install).
>>>>
>>>>
>>>
>>>
>
>

[Matt Warnock]

I've had that same experience several times and discovered it was the
wrong ant version, usually because I forgot and used "ant run-install"
instead of "./ant run-install".  The correct version of ant is supplied
with the code, so use that.  Other versions seem to cause wierdness.
The other possibility that comes to mind is using OpenJDK instead of the
standard Sun JDK-- similar issues with not being able to find all the
right bits.
--
Matt Warnock <[hidden email]>
RidgeCrest Herbals, Inc.

On Sat, 2010-07-24 at 15:50 +0200, Norbert Rieger wrote:

> I tried the clean-all and run-install and got some errors when loading data.
>
> Unfortunately I do not have the output, it was a series of conversion error
> from or to BigDecimal followed by errors on commit.
>
> Maybe I messed up my installation.
>
> A new checkout, build and run-install and the partymgr an facilitymgr is
> available.
>
> -----Ursprüngliche Nachricht-----
> Von: BJ Freeman [mailto:[hidden email]]
> Gesendet: Freitag, 23. Juli 2010 18:56
> An: [hidden email]
> Betreff: Re: AW: no permission for /partymgr, user admin
>
> I have not run into that situation.
> the ant clean-all removed the database that may have a status set from
> some other operation.
> it is always recommend to do a clean-all
> before doing another run-install
>
> erp aql sent the following on 7/23/2010 9:35 AM:
> > It seems that if you do a second ant run-install without an ant clean in
> between there is this boolean converter error:
> >
> >         Could not convert field value for the field: [hasPermission] to
> the [Boolean] type for the value [true]:
> > org.ofbiz.base.util.GeneralException: Conversion from java.lang.String to
> Boolean not currently supported
> > Exception: org.ofbiz.base.util.GeneralException
> > Message: Conversion from java.lang.String to Boolean not currently
> supported
> >
> > Because of this, the permission can not be checked and the message is
> displayed "You do not have permission to view this page. ("PARTYMGR_VIEW" or
> "PARTYMGR_ADMIN" needed)" even that the permissions are correctly
> configured.
> >
> > The problem may be related to a possible bug on the conversion code. So,
> the workaround seems to be: do an ant clean-all every time before ant
> run-install.
> >
> > Regards,
> > Cristian
> >
> > On 23/07/2010, at 6:15 PM, BJ Freeman wrote:
> >
> >> it sounnds like the install did not happen properly
> >> do
> >> ant clean-all
> >> then
> >> ant run-install
> >> if your using linux
> >> then use ./ant
> >>
> >> \\
> >> \\Norbert Rieger sent the following on 7/23/2010 7:14 AM:
> >>> I did a run-install.
> >>>
> >>> If no party is generated, how will I do this if I can not log in (I'm
> new to
> >>> OFBiz maybe I do not yet understand the whole context) ?
> >>>
> >>> -----Ursprüngliche Nachricht-----
> >>> Von: BJ Freeman [mailto:[hidden email]]
> >>> Gesendet: Freitag, 23. Juli 2010 16:01
> >>> An: [hidden email]
> >>> Betreff: Re: no permission for /partymgr, user admin
> >>>
> >>> did you do a
> >>> ant run-install so you would have demo data?
> >>> ant run-install-ext does not install any parties or log ins
> >>> do a
> >>> ant -p
> >>> on how to create an admin account.
> >>> this is only a log in with admin security it does not created any party.
> >>>
> >>> Norbert Rieger sent the following on 7/23/2010 6:07 AM:
> >>>> Hi,
> >>>>
> >>>> I tried to log into /partymgr or /humanres with user admin and got the
> >>> error
> >>>> message:
> >>>>
> >>>> "You do not have permission to view this page. ("PARTYMGR_VIEW" or
> >>>> "PARTYMGR_ADMIN" needed)"
> >>>>
> >>>> Doesn't admin has this permissions on default or do I have to log in
> with
> >>> a
> >>>> different user ?
> >>>>
> >>>> How can I add this permissions to admin (or another user) ?
> >>>>
> >>>> Thanks a lot for your help.
> >>>>
> >>>> Norbert
> >>>>
> >>>> I'm working with trunk revision 967053 (build + run-install).
> >>>>
> >>>>
> >>>
> >>>
> >
> >

[Jacques Le Roux]

See Adam's answer about it in dev ML: Re: Rev 935381 (was: no permission for /partymgr, user admin)
ant1.7.0 is faulty, ant 1.7.1 fixes it

Jacques

From: "Matt Warnock" <[hidden email]>

> I've had that same experience several times and discovered it was the
> wrong ant version, usually because I forgot and used "ant run-install"
> instead of "./ant run-install".  The correct version of ant is supplied
> with the code, so use that.  Other versions seem to cause wierdness.
> The other possibility that comes to mind is using OpenJDK instead of the
> standard Sun JDK-- similar issues with not being able to find all the
> right bits.
> --
> Matt Warnock <[hidden email]>
> RidgeCrest Herbals, Inc.
>
> On Sat, 2010-07-24 at 15:50 +0200, Norbert Rieger wrote:
>> I tried the clean-all and run-install and got some errors when loading data.
>>
>> Unfortunately I do not have the output, it was a series of conversion error
>> from or to BigDecimal followed by errors on commit.
>>
>> Maybe I messed up my installation.
>>
>> A new checkout, build and run-install and the partymgr an facilitymgr is
>> available.
>>
>> -----Ursprüngliche Nachricht-----
>> Von: BJ Freeman [mailto:[hidden email]]
>> Gesendet: Freitag, 23. Juli 2010 18:56
>> An: [hidden email]
>> Betreff: Re: AW: no permission for /partymgr, user admin
>>
>> I have not run into that situation.
>> the ant clean-all removed the database that may have a status set from
>> some other operation.
>> it is always recommend to do a clean-all
>> before doing another run-install
>>
>> erp aql sent the following on 7/23/2010 9:35 AM:
>> > It seems that if you do a second ant run-install without an ant clean in
>> between there is this boolean converter error:
>> >
>> >         Could not convert field value for the field: [hasPermission] to
>> the [Boolean] type for the value [true]:
>> > org.ofbiz.base.util.GeneralException: Conversion from java.lang.String to
>> Boolean not currently supported
>> > Exception: org.ofbiz.base.util.GeneralException
>> > Message: Conversion from java.lang.String to Boolean not currently
>> supported
>> >
>> > Because of this, the permission can not be checked and the message is
>> displayed "You do not have permission to view this page. ("PARTYMGR_VIEW" or
>> "PARTYMGR_ADMIN" needed)" even that the permissions are correctly
>> configured.
>> >
>> > The problem may be related to a possible bug on the conversion code. So,
>> the workaround seems to be: do an ant clean-all every time before ant
>> run-install.
>> >
>> > Regards,
>> > Cristian
>> >
>> > On 23/07/2010, at 6:15 PM, BJ Freeman wrote:
>> >
>> >> it sounnds like the install did not happen properly
>> >> do
>> >> ant clean-all
>> >> then
>> >> ant run-install
>> >> if your using linux
>> >> then use ./ant
>> >>
>> >> \\
>> >> \\Norbert Rieger sent the following on 7/23/2010 7:14 AM:
>> >>> I did a run-install.
>> >>>
>> >>> If no party is generated, how will I do this if I can not log in (I'm
>> new to
>> >>> OFBiz maybe I do not yet understand the whole context) ?
>> >>>
>> >>> -----Ursprüngliche Nachricht-----
>> >>> Von: BJ Freeman [mailto:[hidden email]]
>> >>> Gesendet: Freitag, 23. Juli 2010 16:01
>> >>> An: [hidden email]
>> >>> Betreff: Re: no permission for /partymgr, user admin
>> >>>
>> >>> did you do a
>> >>> ant run-install so you would have demo data?
>> >>> ant run-install-ext does not install any parties or log ins
>> >>> do a
>> >>> ant -p
>> >>> on how to create an admin account.
>> >>> this is only a log in with admin security it does not created any party.
>> >>>
>> >>> Norbert Rieger sent the following on 7/23/2010 6:07 AM:
>> >>>> Hi,
>> >>>>
>> >>>> I tried to log into /partymgr or /humanres with user admin and got the
>> >>> error
>> >>>> message:
>> >>>>
>> >>>> "You do not have permission to view this page. ("PARTYMGR_VIEW" or
>> >>>> "PARTYMGR_ADMIN" needed)"
>> >>>>
>> >>>> Doesn't admin has this permissions on default or do I have to log in
>> with
>> >>> a
>> >>>> different user ?
>> >>>>
>> >>>> How can I add this permissions to admin (or another user) ?
>> >>>>
>> >>>> Thanks a lot for your help.
>> >>>>
>> >>>> Norbert
>> >>>>
>> >>>> I'm working with trunk revision 967053 (build + run-install).
>> >>>>
>> >>>>
>> >>>
>> >>>
>> >
>> >
>

[Jacques Le Roux]

BTW this has been "fixed" by Adam at r978957

Jacques

From: "Jacques Le Roux" <[hidden email]>

> See Adam's answer about it in dev ML: Re: Rev 935381 (was: no permission for /partymgr, user admin)
> ant1.7.0 is faulty, ant 1.7.1 fixes it
>
> Jacques
>
> From: "Matt Warnock" <[hidden email]>
>> I've had that same experience several times and discovered it was the
>> wrong ant version, usually because I forgot and used "ant run-install"
>> instead of "./ant run-install".  The correct version of ant is supplied
>> with the code, so use that.  Other versions seem to cause wierdness.
>> The other possibility that comes to mind is using OpenJDK instead of the
>> standard Sun JDK-- similar issues with not being able to find all the
>> right bits.
>> --
>> Matt Warnock <[hidden email]>
>> RidgeCrest Herbals, Inc.
>>
>> On Sat, 2010-07-24 at 15:50 +0200, Norbert Rieger wrote:
>>> I tried the clean-all and run-install and got some errors when loading data.
>>>
>>> Unfortunately I do not have the output, it was a series of conversion error
>>> from or to BigDecimal followed by errors on commit.
>>>
>>> Maybe I messed up my installation.
>>>
>>> A new checkout, build and run-install and the partymgr an facilitymgr is
>>> available.
>>>
>>> -----Ursprüngliche Nachricht-----
>>> Von: BJ Freeman [mailto:[hidden email]]
>>> Gesendet: Freitag, 23. Juli 2010 18:56
>>> An: [hidden email]
>>> Betreff: Re: AW: no permission for /partymgr, user admin
>>>
>>> I have not run into that situation.
>>> the ant clean-all removed the database that may have a status set from
>>> some other operation.
>>> it is always recommend to do a clean-all
>>> before doing another run-install
>>>
>>> erp aql sent the following on 7/23/2010 9:35 AM:
>>> > It seems that if you do a second ant run-install without an ant clean in
>>> between there is this boolean converter error:
>>> >
>>> >         Could not convert field value for the field: [hasPermission] to
>>> the [Boolean] type for the value [true]:
>>> > org.ofbiz.base.util.GeneralException: Conversion from java.lang.String to
>>> Boolean not currently supported
>>> > Exception: org.ofbiz.base.util.GeneralException
>>> > Message: Conversion from java.lang.String to Boolean not currently
>>> supported
>>> >
>>> > Because of this, the permission can not be checked and the message is
>>> displayed "You do not have permission to view this page. ("PARTYMGR_VIEW" or
>>> "PARTYMGR_ADMIN" needed)" even that the permissions are correctly
>>> configured.
>>> >
>>> > The problem may be related to a possible bug on the conversion code. So,
>>> the workaround seems to be: do an ant clean-all every time before ant
>>> run-install.
>>> >
>>> > Regards,
>>> > Cristian
>>> >
>>> > On 23/07/2010, at 6:15 PM, BJ Freeman wrote:
>>> >
>>> >> it sounnds like the install did not happen properly
>>> >> do
>>> >> ant clean-all
>>> >> then
>>> >> ant run-install
>>> >> if your using linux
>>> >> then use ./ant
>>> >>
>>> >> \\
>>> >> \\Norbert Rieger sent the following on 7/23/2010 7:14 AM:
>>> >>> I did a run-install.
>>> >>>
>>> >>> If no party is generated, how will I do this if I can not log in (I'm
>>> new to
>>> >>> OFBiz maybe I do not yet understand the whole context) ?
>>> >>>
>>> >>> -----Ursprüngliche Nachricht-----
>>> >>> Von: BJ Freeman [mailto:[hidden email]]
>>> >>> Gesendet: Freitag, 23. Juli 2010 16:01
>>> >>> An: [hidden email]
>>> >>> Betreff: Re: no permission for /partymgr, user admin
>>> >>>
>>> >>> did you do a
>>> >>> ant run-install so you would have demo data?
>>> >>> ant run-install-ext does not install any parties or log ins
>>> >>> do a
>>> >>> ant -p
>>> >>> on how to create an admin account.
>>> >>> this is only a log in with admin security it does not created any party.
>>> >>>
>>> >>> Norbert Rieger sent the following on 7/23/2010 6:07 AM:
>>> >>>> Hi,
>>> >>>>
>>> >>>> I tried to log into /partymgr or /humanres with user admin and got the
>>> >>> error
>>> >>>> message:
>>> >>>>
>>> >>>> "You do not have permission to view this page. ("PARTYMGR_VIEW" or
>>> >>>> "PARTYMGR_ADMIN" needed)"
>>> >>>>
>>> >>>> Doesn't admin has this permissions on default or do I have to log in
>>> with
>>> >>> a
>>> >>>> different user ?
>>> >>>>
>>> >>>> How can I add this permissions to admin (or another user) ?
>>> >>>>
>>> >>>> Thanks a lot for your help.
>>> >>>>
>>> >>>> Norbert
>>> >>>>
>>> >>>> I'm working with trunk revision 967053 (build + run-install).
>>> >>>>
>>> >>>>
>>> >>>
>>> >>>
>>> >
>>> >
>>
>
>