回复:pos - network printer works

[和风赛跑]

Could you supply the more detail about the exception you got?
 
 
 
 ------------------ 原始邮件 ------------------
  发件人: "Branden Strickland"<[hidden email]>;
 发送时间: 2008年6月18日(星期三) 中午11:39
 收件人: "user"<[hidden email]>;
 
 主题: pos - network printer works

 
 I jus got my tm-t88IV working with the ofbis pos plugged into a Switch
in another room!  Theethernet add in card worked like a charm!  I get
one exception that is caught in the terminal but doesn't stop the pos
from koading.  The print method works fine with it.  The error was
somthing I'm assuming the serial port can provide and sais something
like the poweer supply is off.


Hope this helps some one

[Branden Strickland]

I aim to please.

I think this may be related to the fact that my pop-drawer is still
configured in pos-components.xml and you can't hook them up to the Ethernet
printers.

---- exception report
----------------------------------------------------------
Exception: jpos.JposException
Message: The power supply of the device is off.
---- stack trace
---------------------------------------------------------------
jpos.JposException: The power supply of the device is off.
jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
Source)
jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
Source)
jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
Source)
jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
Source)
jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
Source)
jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
Source)
jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
Source)
jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
Source)
jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
org.ofbiz.base.start.Start.startServer(Start.java:312)
org.ofbiz.base.start.Start.start(Start.java:316)
org.ofbiz.base.start.Start.main(Start.java:399)
--------------------------------------------------------------------------------


2008/6/17 和风赛跑 <[hidden email]>:

> Could you supply the more detail about the exception you got?
>
>
>
>  ------------------ 原始邮件 ------------------
>  发件人: "Branden Strickland"<[hidden email]>;
>  发送时间: 2008年6月18日(星期三) 中午11:39
>  收件人: "user"<[hidden email]>;
>
>  主题: pos - network printer works
>
>
>  I jus got my tm-t88IV working with the ofbis pos plugged into a Switch
> in another room!  Theethernet add in card worked like a charm!  I get
> one exception that is caught in the terminal but doesn't stop the pos
> from koading.  The print method works fine with it.  The error was
> somthing I'm assuming the serial port can provide and sais something
> like the poweer supply is off.
>
>
> Hope this helps some one
>

[Jacques Le Roux]

Why don' tyou use a simple pop-drawer connected to your printer with a rj11 cable ?

Jacques

From: "Branden Strickland" <[hidden email]>

>I aim to please.
>
> I think this may be related to the fact that my pop-drawer is still
> configured in pos-components.xml and you can't hook them up to the Ethernet
> printers.
>
> ---- exception report
> ----------------------------------------------------------
> Exception: jpos.JposException
> Message: The power supply of the device is off.
> ---- stack trace
> ---------------------------------------------------------------
> jpos.JposException: The power supply of the device is off.
> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
> Source)
> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
> Source)
> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
> Source)
> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
> Source)
> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
> Source)
> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
> Source)
> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
> Source)
> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
> Source)
> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
> org.ofbiz.base.start.Start.startServer(Start.java:312)
> org.ofbiz.base.start.Start.start(Start.java:316)
> org.ofbiz.base.start.Start.main(Start.java:399)
> --------------------------------------------------------------------------------
>
>
> 2008/6/17 和风赛跑 <[hidden email]>:
>
>> Could you supply the more detail about the exception you got?
>>
>>
>>
>>  ------------------ 原始邮件 ------------------
>>  发件人: "Branden Strickland"<[hidden email]>;
>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>  收件人: "user"<[hidden email]>;
>>
>>  主题: pos - network printer works
>>
>>
>>  I jus got my tm-t88IV working with the ofbis pos plugged into a Switch
>> in another room!  Theethernet add in card worked like a charm!  I get
>> one exception that is caught in the terminal but doesn't stop the pos
>> from koading.  The print method works fine with it.  The error was
>> somthing I'm assuming the serial port can provide and sais something
>> like the poweer supply is off.
>>
>>
>> Hope this helps some one
>>
>

[Branden Strickland]

Epson specifically tells you only to use the RJ11 cord with serial.  You're
not to use it with the Ethernet connection.  I'm not sure why, but they
insist that pass-through drawers and customer displays must not be used with
Ethernet Drawers.

Not a big deal..  I can modify the code to work.   I was just letting
everyone know that the ethernet version does indeed work with ofbiz.

2008/6/18 Jacques Le Roux <[hidden email]>:

> Why don' tyou use a simple pop-drawer connected to your printer with a rj11
> cable ?
>
> Jacques
>
> From: "Branden Strickland" <[hidden email]>
>
>  I aim to please.
>>
>> I think this may be related to the fact that my pop-drawer is still
>> configured in pos-components.xml and you can't hook them up to the
>> Ethernet
>> printers.
>>
>> ---- exception report
>> ----------------------------------------------------------
>> Exception: jpos.JposException
>> Message: The power supply of the device is off.
>> ---- stack trace
>> ---------------------------------------------------------------
>> jpos.JposException: The power supply of the device is off.
>>
>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>> Source)
>>
>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>> Source)
>>
>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>> Source)
>>
>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>> Source)
>>
>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>> Source)
>>
>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>> Source)
>>
>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>> Source)
>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>> Source)
>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>
>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>> org.ofbiz.base.start.Start.start(Start.java:316)
>> org.ofbiz.base.start.Start.main(Start.java:399)
>>
>> --------------------------------------------------------------------------------
>>
>>
>> 2008/6/17 和风赛跑 <[hidden email]>:
>>
>>  Could you supply the more detail about the exception you got?
>>>
>>>
>>>
>>>  ------------------ 原始邮件 ------------------
>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>  收件人: "user"<[hidden email]>;
>>>
>>>  主题: pos - network printer works
>>>
>>>
>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a Switch
>>> in another room!  Theethernet add in card worked like a charm!  I get
>>> one exception that is caught in the terminal but doesn't stop the pos
>>> from koading.  The print method works fine with it.  The error was
>>> somthing I'm assuming the serial port can provide and sais something
>>> like the poweer supply is off.
>>>
>>>
>>> Hope this helps some one
>>>
>>>
>>
>

[Jacques Le Roux]

Branden,

Would you mind contribute this effort to the community ? Now that you began to send a 1st patch it should not be a big deal for you
:o)

TIA

Jacques

From: "Branden Strickland" <[hidden email]>

> Epson specifically tells you only to use the RJ11 cord with serial.  You're
> not to use it with the Ethernet connection.  I'm not sure why, but they
> insist that pass-through drawers and customer displays must not be used with
> Ethernet Drawers.
>
> Not a big deal..  I can modify the code to work.   I was just letting
> everyone know that the ethernet version does indeed work with ofbiz.
>
> 2008/6/18 Jacques Le Roux <[hidden email]>:
>
>> Why don' tyou use a simple pop-drawer connected to your printer with a rj11
>> cable ?
>>
>> Jacques
>>
>> From: "Branden Strickland" <[hidden email]>
>>
>>  I aim to please.
>>>
>>> I think this may be related to the fact that my pop-drawer is still
>>> configured in pos-components.xml and you can't hook them up to the
>>> Ethernet
>>> printers.
>>>
>>> ---- exception report
>>> ----------------------------------------------------------
>>> Exception: jpos.JposException
>>> Message: The power supply of the device is off.
>>> ---- stack trace
>>> ---------------------------------------------------------------
>>> jpos.JposException: The power supply of the device is off.
>>>
>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>> Source)
>>>
>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>> Source)
>>>
>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>> Source)
>>>
>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>> Source)
>>>
>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>> Source)
>>>
>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>> Source)
>>>
>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>> Source)
>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>> Source)
>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>
>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>
>>> --------------------------------------------------------------------------------
>>>
>>>
>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>
>>>  Could you supply the more detail about the exception you got?
>>>>
>>>>
>>>>
>>>>  ------------------ 原始邮件 ------------------
>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>  收件人: "user"<[hidden email]>;
>>>>
>>>>  主题: pos - network printer works
>>>>
>>>>
>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a Switch
>>>> in another room!  Theethernet add in card worked like a charm!  I get
>>>> one exception that is caught in the terminal but doesn't stop the pos
>>>> from koading.  The print method works fine with it.  The error was
>>>> somthing I'm assuming the serial port can provide and sais something
>>>> like the poweer supply is off.
>>>>
>>>>
>>>> Hope this helps some one
>>>>
>>>>
>>>
>>
>

[Branden Strickland]

What exactly would you want?  Would you like a right up for the POS page for
hooking up the network printer?  Or would you like me to find out where that
small exception is found and try to fix?   It seems like it's being done
within the Epson ADK java files, but whatever you'd like from me, I'll give
a shot.

Thanks -

2008/6/18 Jacques Le Roux <[hidden email]>:

> Branden,
>
> Would you mind contribute this effort to the community ? Now that you began
> to send a 1st patch it should not be a big deal for you :o)
>
> TIA
>
>
> Jacques
>
> From: "Branden Strickland" <[hidden email]>
>
>
>  Epson specifically tells you only to use the RJ11 cord with serial.
>>  You're
>> not to use it with the Ethernet connection.  I'm not sure why, but they
>> insist that pass-through drawers and customer displays must not be used
>> with
>> Ethernet Drawers.
>>
>> Not a big deal..  I can modify the code to work.   I was just letting
>> everyone know that the ethernet version does indeed work with ofbiz.
>>
>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>
>>  Why don' tyou use a simple pop-drawer connected to your printer with a
>>> rj11
>>> cable ?
>>>
>>> Jacques
>>>
>>> From: "Branden Strickland" <[hidden email]>
>>>
>>>  I aim to please.
>>>
>>>>
>>>> I think this may be related to the fact that my pop-drawer is still
>>>> configured in pos-components.xml and you can't hook them up to the
>>>> Ethernet
>>>> printers.
>>>>
>>>> ---- exception report
>>>> ----------------------------------------------------------
>>>> Exception: jpos.JposException
>>>> Message: The power supply of the device is off.
>>>> ---- stack trace
>>>> ---------------------------------------------------------------
>>>> jpos.JposException: The power supply of the device is off.
>>>>
>>>>
>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>> Source)
>>>>
>>>>
>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>> Source)
>>>>
>>>>
>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>> Source)
>>>>
>>>>
>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>> Source)
>>>>
>>>>
>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>> Source)
>>>>
>>>>
>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>> Source)
>>>>
>>>>
>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>> Source)
>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>> Source)
>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>
>>>>
>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>
>>>>
>>>> --------------------------------------------------------------------------------
>>>>
>>>>
>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>
>>>>  Could you supply the more detail about the exception you got?
>>>>
>>>>>
>>>>>
>>>>>
>>>>>  ------------------ 原始邮件 ------------------
>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>  收件人: "user"<[hidden email]>;
>>>>>
>>>>>  主题: pos - network printer works
>>>>>
>>>>>
>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a Switch
>>>>> in another room!  Theethernet add in card worked like a charm!  I get
>>>>> one exception that is caught in the terminal but doesn't stop the pos
>>>>> from koading.  The print method works fine with it.  The error was
>>>>> somthing I'm assuming the serial port can provide and sais something
>>>>> like the poweer supply is off.
>>>>>
>>>>>
>>>>> Hope this helps some one
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>

[Jacques Le Roux]

I would suggest to do the simplest for you

Jacques

From: "Branden Strickland" <[hidden email]>

> What exactly would you want?  Would you like a right up for the POS page for
> hooking up the network printer?  Or would you like me to find out where that
> small exception is found and try to fix?   It seems like it's being done
> within the Epson ADK java files, but whatever you'd like from me, I'll give
> a shot.
>
> Thanks -
>
> 2008/6/18 Jacques Le Roux <[hidden email]>:
>
>> Branden,
>>
>> Would you mind contribute this effort to the community ? Now that you began
>> to send a 1st patch it should not be a big deal for you :o)
>>
>> TIA
>>
>>
>> Jacques
>>
>> From: "Branden Strickland" <[hidden email]>
>>
>>
>>  Epson specifically tells you only to use the RJ11 cord with serial.
>>>  You're
>>> not to use it with the Ethernet connection.  I'm not sure why, but they
>>> insist that pass-through drawers and customer displays must not be used
>>> with
>>> Ethernet Drawers.
>>>
>>> Not a big deal..  I can modify the code to work.   I was just letting
>>> everyone know that the ethernet version does indeed work with ofbiz.
>>>
>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>
>>>  Why don' tyou use a simple pop-drawer connected to your printer with a
>>>> rj11
>>>> cable ?
>>>>
>>>> Jacques
>>>>
>>>> From: "Branden Strickland" <[hidden email]>
>>>>
>>>>  I aim to please.
>>>>
>>>>>
>>>>> I think this may be related to the fact that my pop-drawer is still
>>>>> configured in pos-components.xml and you can't hook them up to the
>>>>> Ethernet
>>>>> printers.
>>>>>
>>>>> ---- exception report
>>>>> ----------------------------------------------------------
>>>>> Exception: jpos.JposException
>>>>> Message: The power supply of the device is off.
>>>>> ---- stack trace
>>>>> ---------------------------------------------------------------
>>>>> jpos.JposException: The power supply of the device is off.
>>>>>
>>>>>
>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>>> Source)
>>>>>
>>>>>
>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>> Source)
>>>>>
>>>>>
>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>> Source)
>>>>>
>>>>>
>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>>> Source)
>>>>>
>>>>>
>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>>> Source)
>>>>>
>>>>>
>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>>> Source)
>>>>>
>>>>>
>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>>> Source)
>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>>> Source)
>>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>>
>>>>>
>>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>>
>>>>>
>>>>> --------------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>>
>>>>>  Could you supply the more detail about the exception you got?
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>  ------------------ 原始邮件 ------------------
>>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>>  收件人: "user"<[hidden email]>;
>>>>>>
>>>>>>  主题: pos - network printer works
>>>>>>
>>>>>>
>>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a Switch
>>>>>> in another room!  Theethernet add in card worked like a charm!  I get
>>>>>> one exception that is caught in the terminal but doesn't stop the pos
>>>>>> from koading.  The print method works fine with it.  The error was
>>>>>> somthing I'm assuming the serial port can provide and sais something
>>>>>> like the poweer supply is off.
>>>>>>
>>>>>>
>>>>>> Hope this helps some one
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

[Branden Strickland]

would you like me to comment on the POS write up on the page that describes
the list of printers that work?  Or would you like me to comment on a
particular jira issue?  Or at that extent, possibly create a whole new jira
issue... which might be fun, since I haven't do that before!

2008/6/19 Jacques Le Roux <[hidden email]>:

> I would suggest to do the simplest for you
>
>
> Jacques
>
> From: "Branden Strickland" <[hidden email]>
>
>> What exactly would you want?  Would you like a right up for the POS page
>> for
>> hooking up the network printer?  Or would you like me to find out where
>> that
>> small exception is found and try to fix?   It seems like it's being done
>> within the Epson ADK java files, but whatever you'd like from me, I'll
>> give
>> a shot.
>>
>> Thanks -
>>
>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>
>>  Branden,
>>>
>>> Would you mind contribute this effort to the community ? Now that you
>>> began
>>> to send a 1st patch it should not be a big deal for you :o)
>>>
>>> TIA
>>>
>>>
>>> Jacques
>>>
>>> From: "Branden Strickland" <[hidden email]>
>>>
>>>
>>>  Epson specifically tells you only to use the RJ11 cord with serial.
>>>
>>>>  You're
>>>> not to use it with the Ethernet connection.  I'm not sure why, but they
>>>> insist that pass-through drawers and customer displays must not be used
>>>> with
>>>> Ethernet Drawers.
>>>>
>>>> Not a big deal..  I can modify the code to work.   I was just letting
>>>> everyone know that the ethernet version does indeed work with ofbiz.
>>>>
>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>
>>>>  Why don' tyou use a simple pop-drawer connected to your printer with a
>>>>
>>>>> rj11
>>>>> cable ?
>>>>>
>>>>> Jacques
>>>>>
>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>
>>>>>  I aim to please.
>>>>>
>>>>>
>>>>>> I think this may be related to the fact that my pop-drawer is still
>>>>>> configured in pos-components.xml and you can't hook them up to the
>>>>>> Ethernet
>>>>>> printers.
>>>>>>
>>>>>> ---- exception report
>>>>>> ----------------------------------------------------------
>>>>>> Exception: jpos.JposException
>>>>>> Message: The power supply of the device is off.
>>>>>> ---- stack trace
>>>>>> ---------------------------------------------------------------
>>>>>> jpos.JposException: The power supply of the device is off.
>>>>>>
>>>>>>
>>>>>>
>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>>>> Source)
>>>>>>
>>>>>>
>>>>>>
>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>> Source)
>>>>>>
>>>>>>
>>>>>>
>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>> Source)
>>>>>>
>>>>>>
>>>>>>
>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>>>> Source)
>>>>>>
>>>>>>
>>>>>>
>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>>>> Source)
>>>>>>
>>>>>>
>>>>>>
>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>>>> Source)
>>>>>>
>>>>>>
>>>>>>
>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>>>> Source)
>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>>>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>>>> Source)
>>>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>>>
>>>>>>
>>>>>>
>>>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>>>>
>>>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>>>
>>>>>>
>>>>>>
>>>>>> --------------------------------------------------------------------------------
>>>>>>
>>>>>>
>>>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>>>
>>>>>>  Could you supply the more detail about the exception you got?
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>  ------------------ 原始邮件 ------------------
>>>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>>>  收件人: "user"<[hidden email]>;
>>>>>>>
>>>>>>>  主题: pos - network printer works
>>>>>>>
>>>>>>>
>>>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a
>>>>>>> Switch
>>>>>>> in another room!  Theethernet add in card worked like a charm!  I get
>>>>>>> one exception that is caught in the terminal but doesn't stop the pos
>>>>>>> from koading.  The print method works fine with it.  The error was
>>>>>>> somthing I'm assuming the serial port can provide and sais something
>>>>>>> like the poweer supply is off.
>>>>>>>
>>>>>>>
>>>>>>> Hope this helps some one
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

[Jacques Le Roux]

Feel free to open a Jira issue, then we will see... There is clear informations in
http://docs.ofbiz.org/display/OFBADMIN/OFBiz+Contributors+Best+Practices please read them if not already done

Jacques

From: "Branden Strickland" <[hidden email]>

> would you like me to comment on the POS write up on the page that describes
> the list of printers that work?  Or would you like me to comment on a
> particular jira issue?  Or at that extent, possibly create a whole new jira
> issue... which might be fun, since I haven't do that before!
>
> 2008/6/19 Jacques Le Roux <[hidden email]>:
>
>> I would suggest to do the simplest for you
>>
>>
>> Jacques
>>
>> From: "Branden Strickland" <[hidden email]>
>>
>>> What exactly would you want?  Would you like a right up for the POS page
>>> for
>>> hooking up the network printer?  Or would you like me to find out where
>>> that
>>> small exception is found and try to fix?   It seems like it's being done
>>> within the Epson ADK java files, but whatever you'd like from me, I'll
>>> give
>>> a shot.
>>>
>>> Thanks -
>>>
>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>
>>>  Branden,
>>>>
>>>> Would you mind contribute this effort to the community ? Now that you
>>>> began
>>>> to send a 1st patch it should not be a big deal for you :o)
>>>>
>>>> TIA
>>>>
>>>>
>>>> Jacques
>>>>
>>>> From: "Branden Strickland" <[hidden email]>
>>>>
>>>>
>>>>  Epson specifically tells you only to use the RJ11 cord with serial.
>>>>
>>>>>  You're
>>>>> not to use it with the Ethernet connection.  I'm not sure why, but they
>>>>> insist that pass-through drawers and customer displays must not be used
>>>>> with
>>>>> Ethernet Drawers.
>>>>>
>>>>> Not a big deal..  I can modify the code to work.   I was just letting
>>>>> everyone know that the ethernet version does indeed work with ofbiz.
>>>>>
>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>
>>>>>  Why don' tyou use a simple pop-drawer connected to your printer with a
>>>>>
>>>>>> rj11
>>>>>> cable ?
>>>>>>
>>>>>> Jacques
>>>>>>
>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>
>>>>>>  I aim to please.
>>>>>>
>>>>>>
>>>>>>> I think this may be related to the fact that my pop-drawer is still
>>>>>>> configured in pos-components.xml and you can't hook them up to the
>>>>>>> Ethernet
>>>>>>> printers.
>>>>>>>
>>>>>>> ---- exception report
>>>>>>> ----------------------------------------------------------
>>>>>>> Exception: jpos.JposException
>>>>>>> Message: The power supply of the device is off.
>>>>>>> ---- stack trace
>>>>>>> ---------------------------------------------------------------
>>>>>>> jpos.JposException: The power supply of the device is off.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>>>>> Source)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>> Source)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>> Source)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>>>>> Source)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>>>>> Source)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>>>>> Source)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>>>>> Source)
>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>>>>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>>>>> Source)
>>>>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>>>>>
>>>>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --------------------------------------------------------------------------------
>>>>>>>
>>>>>>>
>>>>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>>>>
>>>>>>>  Could you supply the more detail about the exception you got?
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>  ------------------ 原始邮件 ------------------
>>>>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>>>>  收件人: "user"<[hidden email]>;
>>>>>>>>
>>>>>>>>  主题: pos - network printer works
>>>>>>>>
>>>>>>>>
>>>>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a
>>>>>>>> Switch
>>>>>>>> in another room!  Theethernet add in card worked like a charm!  I get
>>>>>>>> one exception that is caught in the terminal but doesn't stop the pos
>>>>>>>> from koading.  The print method works fine with it.  The error was
>>>>>>>> somthing I'm assuming the serial port can provide and sais something
>>>>>>>> like the poweer supply is off.
>>>>>>>>
>>>>>>>>
>>>>>>>> Hope this helps some one
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

[Branden Strickland]

https://issues.apache.org/jira/browse/OFBIZ-1853

That wasn't so bad! ;P

2008/6/19 Jacques Le Roux <[hidden email]>:

> Feel free to open a Jira issue, then we will see... There is clear
> informations in
> http://docs.ofbiz.org/display/OFBADMIN/OFBiz+Contributors+Best+Practicesplease read them if not already done
>
>
> Jacques
>
> From: "Branden Strickland" <[hidden email]>
>
>> would you like me to comment on the POS write up on the page that
>> describes
>> the list of printers that work?  Or would you like me to comment on a
>> particular jira issue?  Or at that extent, possibly create a whole new
>> jira
>> issue... which might be fun, since I haven't do that before!
>>
>> 2008/6/19 Jacques Le Roux <[hidden email]>:
>>
>>  I would suggest to do the simplest for you
>>>
>>>
>>> Jacques
>>>
>>> From: "Branden Strickland" <[hidden email]>
>>>
>>>  What exactly would you want?  Would you like a right up for the POS page
>>>> for
>>>> hooking up the network printer?  Or would you like me to find out where
>>>> that
>>>> small exception is found and try to fix?   It seems like it's being done
>>>> within the Epson ADK java files, but whatever you'd like from me, I'll
>>>> give
>>>> a shot.
>>>>
>>>> Thanks -
>>>>
>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>
>>>>  Branden,
>>>>
>>>>>
>>>>> Would you mind contribute this effort to the community ? Now that you
>>>>> began
>>>>> to send a 1st patch it should not be a big deal for you :o)
>>>>>
>>>>> TIA
>>>>>
>>>>>
>>>>> Jacques
>>>>>
>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>
>>>>>
>>>>>  Epson specifically tells you only to use the RJ11 cord with serial.
>>>>>
>>>>>   You're
>>>>>> not to use it with the Ethernet connection.  I'm not sure why, but
>>>>>> they
>>>>>> insist that pass-through drawers and customer displays must not be
>>>>>> used
>>>>>> with
>>>>>> Ethernet Drawers.
>>>>>>
>>>>>> Not a big deal..  I can modify the code to work.   I was just letting
>>>>>> everyone know that the ethernet version does indeed work with ofbiz.
>>>>>>
>>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>>
>>>>>>  Why don' tyou use a simple pop-drawer connected to your printer with
>>>>>> a
>>>>>>
>>>>>>  rj11
>>>>>>> cable ?
>>>>>>>
>>>>>>> Jacques
>>>>>>>
>>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>>
>>>>>>>  I aim to please.
>>>>>>>
>>>>>>>
>>>>>>>  I think this may be related to the fact that my pop-drawer is still
>>>>>>>> configured in pos-components.xml and you can't hook them up to the
>>>>>>>> Ethernet
>>>>>>>> printers.
>>>>>>>>
>>>>>>>> ---- exception report
>>>>>>>> ----------------------------------------------------------
>>>>>>>> Exception: jpos.JposException
>>>>>>>> Message: The power supply of the device is off.
>>>>>>>> ---- stack trace
>>>>>>>> ---------------------------------------------------------------
>>>>>>>> jpos.JposException: The power supply of the device is off.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>>>>>> Source)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>> Source)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>> Source)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>>>>>> Source)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>>>>>> Source)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>>>>>> Source)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>>>>>> Source)
>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>>>>>>>>
>>>>>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>>>>>> Source)
>>>>>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>>>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>>>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>>>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>>>>>>
>>>>>>>>
>>>>>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>>>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>>>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>>>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>>>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --------------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>>>>>
>>>>>>>>  Could you supply the more detail about the exception you got?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>>  ------------------ 原始邮件 ------------------
>>>>>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>>>>>  收件人: "user"<[hidden email]>;
>>>>>>>>>
>>>>>>>>>  主题: pos - network printer works
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a
>>>>>>>>> Switch
>>>>>>>>> in another room!  Theethernet add in card worked like a charm!  I
>>>>>>>>> get
>>>>>>>>> one exception that is caught in the terminal but doesn't stop the
>>>>>>>>> pos
>>>>>>>>> from koading.  The print method works fine with it.  The error was
>>>>>>>>> somthing I'm assuming the serial port can provide and sais
>>>>>>>>> something
>>>>>>>>> like the poweer supply is off.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Hope this helps some one
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

[Branden Strickland]

Jacques,

You can remove the stack trace (java exception) from the POS info page.  I
figured out what it was.

I still had my cash drawer setup in pos-components and it's setup to pass
through the printer.  It was actually the cash drawer thinking that the
receipt printer was turned off (becuase it wasn't connected) because as
stated before, Epson specifically tells you never to connected the cash
drawer to a network printer.

So there you have it, the implementation with no errors!

Thanks!

2008/6/26 Branden Strickland <[hidden email]>:

> https://issues.apache.org/jira/browse/OFBIZ-1853
>
> That wasn't so bad! ;P
>
>
> 2008/6/19 Jacques Le Roux <[hidden email]>:
>
>> Feel free to open a Jira issue, then we will see... There is clear
>> informations in
>> http://docs.ofbiz.org/display/OFBADMIN/OFBiz+Contributors+Best+Practicesplease read them if not already done
>>
>>
>> Jacques
>>
>> From: "Branden Strickland" <[hidden email]>
>>
>>> would you like me to comment on the POS write up on the page that
>>> describes
>>> the list of printers that work?  Or would you like me to comment on a
>>> particular jira issue?  Or at that extent, possibly create a whole new
>>> jira
>>> issue... which might be fun, since I haven't do that before!
>>>
>>> 2008/6/19 Jacques Le Roux <[hidden email]>:
>>>
>>>  I would suggest to do the simplest for you
>>>>
>>>>
>>>> Jacques
>>>>
>>>> From: "Branden Strickland" <[hidden email]>
>>>>
>>>>  What exactly would you want?  Would you like a right up for the POS
>>>>> page
>>>>> for
>>>>> hooking up the network printer?  Or would you like me to find out where
>>>>> that
>>>>> small exception is found and try to fix?   It seems like it's being
>>>>> done
>>>>> within the Epson ADK java files, but whatever you'd like from me, I'll
>>>>> give
>>>>> a shot.
>>>>>
>>>>> Thanks -
>>>>>
>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>
>>>>>  Branden,
>>>>>
>>>>>>
>>>>>> Would you mind contribute this effort to the community ? Now that you
>>>>>> began
>>>>>> to send a 1st patch it should not be a big deal for you :o)
>>>>>>
>>>>>> TIA
>>>>>>
>>>>>>
>>>>>> Jacques
>>>>>>
>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>
>>>>>>
>>>>>>  Epson specifically tells you only to use the RJ11 cord with serial.
>>>>>>
>>>>>>   You're
>>>>>>> not to use it with the Ethernet connection.  I'm not sure why, but
>>>>>>> they
>>>>>>> insist that pass-through drawers and customer displays must not be
>>>>>>> used
>>>>>>> with
>>>>>>> Ethernet Drawers.
>>>>>>>
>>>>>>> Not a big deal..  I can modify the code to work.   I was just letting
>>>>>>> everyone know that the ethernet version does indeed work with ofbiz.
>>>>>>>
>>>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>>>
>>>>>>>  Why don' tyou use a simple pop-drawer connected to your printer with
>>>>>>> a
>>>>>>>
>>>>>>>  rj11
>>>>>>>> cable ?
>>>>>>>>
>>>>>>>> Jacques
>>>>>>>>
>>>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>>>
>>>>>>>>  I aim to please.
>>>>>>>>
>>>>>>>>
>>>>>>>>  I think this may be related to the fact that my pop-drawer is still
>>>>>>>>> configured in pos-components.xml and you can't hook them up to the
>>>>>>>>> Ethernet
>>>>>>>>> printers.
>>>>>>>>>
>>>>>>>>> ---- exception report
>>>>>>>>> ----------------------------------------------------------
>>>>>>>>> Exception: jpos.JposException
>>>>>>>>> Message: The power supply of the device is off.
>>>>>>>>> ---- stack trace
>>>>>>>>> ---------------------------------------------------------------
>>>>>>>>> jpos.JposException: The power supply of the device is off.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>>>>>>> Source)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>>> Source)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>>> Source)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>>>>>>> Source)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>>>>>>> Source)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>>>>>>> Source)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>>>>>>> Source)
>>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown Source)
>>>>>>>>>
>>>>>>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>>>>>>> Source)
>>>>>>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>>>>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>>>>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>>>>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>>>>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>>>>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>>>>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>>>>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --------------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>>>>>>
>>>>>>>>>  Could you supply the more detail about the exception you got?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  ------------------ 原始邮件 ------------------
>>>>>>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>>>>>>  收件人: "user"<[hidden email]>;
>>>>>>>>>>
>>>>>>>>>>  主题: pos - network printer works
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a
>>>>>>>>>> Switch
>>>>>>>>>> in another room!  Theethernet add in card worked like a charm!  I
>>>>>>>>>> get
>>>>>>>>>> one exception that is caught in the terminal but doesn't stop the
>>>>>>>>>> pos
>>>>>>>>>> from koading.  The print method works fine with it.  The error was
>>>>>>>>>> somthing I'm assuming the serial port can provide and sais
>>>>>>>>>> something
>>>>>>>>>> like the poweer supply is off.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hope this helps some one
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

[Branden Strickland]

Never mind!  I took care of it!  Didn't realize I could edit that page when
logged in!

2008/7/7 Branden Strickland <[hidden email]>:

> Jacques,
>
> You can remove the stack trace (java exception) from the POS info page.  I
> figured out what it was.
>
> I still had my cash drawer setup in pos-components and it's setup to pass
> through the printer.  It was actually the cash drawer thinking that the
> receipt printer was turned off (becuase it wasn't connected) because as
> stated before, Epson specifically tells you never to connected the cash
> drawer to a network printer.
>
> So there you have it, the implementation with no errors!
>
> Thanks!
>
> 2008/6/26 Branden Strickland <[hidden email]>:
>
> https://issues.apache.org/jira/browse/OFBIZ-1853
>>
>> That wasn't so bad! ;P
>>
>>
>> 2008/6/19 Jacques Le Roux <[hidden email]>:
>>
>>> Feel free to open a Jira issue, then we will see... There is clear
>>> informations in
>>> http://docs.ofbiz.org/display/OFBADMIN/OFBiz+Contributors+Best+Practicesplease read them if not already done
>>>
>>>
>>> Jacques
>>>
>>> From: "Branden Strickland" <[hidden email]>
>>>
>>>> would you like me to comment on the POS write up on the page that
>>>> describes
>>>> the list of printers that work?  Or would you like me to comment on a
>>>> particular jira issue?  Or at that extent, possibly create a whole new
>>>> jira
>>>> issue... which might be fun, since I haven't do that before!
>>>>
>>>> 2008/6/19 Jacques Le Roux <[hidden email]>:
>>>>
>>>>  I would suggest to do the simplest for you
>>>>>
>>>>>
>>>>> Jacques
>>>>>
>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>
>>>>>  What exactly would you want?  Would you like a right up for the POS
>>>>>> page
>>>>>> for
>>>>>> hooking up the network printer?  Or would you like me to find out
>>>>>> where
>>>>>> that
>>>>>> small exception is found and try to fix?   It seems like it's being
>>>>>> done
>>>>>> within the Epson ADK java files, but whatever you'd like from me, I'll
>>>>>> give
>>>>>> a shot.
>>>>>>
>>>>>> Thanks -
>>>>>>
>>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>>
>>>>>>  Branden,
>>>>>>
>>>>>>>
>>>>>>> Would you mind contribute this effort to the community ? Now that you
>>>>>>> began
>>>>>>> to send a 1st patch it should not be a big deal for you :o)
>>>>>>>
>>>>>>> TIA
>>>>>>>
>>>>>>>
>>>>>>> Jacques
>>>>>>>
>>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>>
>>>>>>>
>>>>>>>  Epson specifically tells you only to use the RJ11 cord with serial.
>>>>>>>
>>>>>>>   You're
>>>>>>>> not to use it with the Ethernet connection.  I'm not sure why, but
>>>>>>>> they
>>>>>>>> insist that pass-through drawers and customer displays must not be
>>>>>>>> used
>>>>>>>> with
>>>>>>>> Ethernet Drawers.
>>>>>>>>
>>>>>>>> Not a big deal..  I can modify the code to work.   I was just
>>>>>>>> letting
>>>>>>>> everyone know that the ethernet version does indeed work with ofbiz.
>>>>>>>>
>>>>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>>>>
>>>>>>>>  Why don' tyou use a simple pop-drawer connected to your printer
>>>>>>>> with a
>>>>>>>>
>>>>>>>>  rj11
>>>>>>>>> cable ?
>>>>>>>>>
>>>>>>>>> Jacques
>>>>>>>>>
>>>>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>>>>
>>>>>>>>>  I aim to please.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  I think this may be related to the fact that my pop-drawer is
>>>>>>>>>> still
>>>>>>>>>> configured in pos-components.xml and you can't hook them up to the
>>>>>>>>>> Ethernet
>>>>>>>>>> printers.
>>>>>>>>>>
>>>>>>>>>> ---- exception report
>>>>>>>>>> ----------------------------------------------------------
>>>>>>>>>> Exception: jpos.JposException
>>>>>>>>>> Message: The power supply of the device is off.
>>>>>>>>>> ---- stack trace
>>>>>>>>>> ---------------------------------------------------------------
>>>>>>>>>> jpos.JposException: The power supply of the device is off.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>>>>>>>> Source)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>>>> Source)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>>>> Source)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>>>>>>>> Source)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>>>>>>>> Source)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>>>>>>>> Source)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>>>>>>>> Source)
>>>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown
>>>>>>>>>> Source)
>>>>>>>>>>
>>>>>>>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>>>>>>>> Source)
>>>>>>>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>>>>>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>>>>>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>>>>>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>>>>>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>>>>>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>>>>>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>>>>>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --------------------------------------------------------------------------------
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>>>>>>>
>>>>>>>>>>  Could you supply the more detail about the exception you got?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>  ------------------ 原始邮件 ------------------
>>>>>>>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>>>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>>>>>>>  收件人: "user"<[hidden email]>;
>>>>>>>>>>>
>>>>>>>>>>>  主题: pos - network printer works
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a
>>>>>>>>>>> Switch
>>>>>>>>>>> in another room!  Theethernet add in card worked like a charm!  I
>>>>>>>>>>> get
>>>>>>>>>>> one exception that is caught in the terminal but doesn't stop the
>>>>>>>>>>> pos
>>>>>>>>>>> from koading.  The print method works fine with it.  The error
>>>>>>>>>>> was
>>>>>>>>>>> somthing I'm assuming the serial port can provide and sais
>>>>>>>>>>> something
>>>>>>>>>>> like the poweer supply is off.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Hope this helps some one
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

[Jacques Le Roux]

Cool, thanks Branden !

Jacques

From: "Branden Strickland" <[hidden email]>

> Never mind!  I took care of it!  Didn't realize I could edit that page when
> logged in!
>
> 2008/7/7 Branden Strickland <[hidden email]>:
>
>> Jacques,
>>
>> You can remove the stack trace (java exception) from the POS info page.  I
>> figured out what it was.
>>
>> I still had my cash drawer setup in pos-components and it's setup to pass
>> through the printer.  It was actually the cash drawer thinking that the
>> receipt printer was turned off (becuase it wasn't connected) because as
>> stated before, Epson specifically tells you never to connected the cash
>> drawer to a network printer.
>>
>> So there you have it, the implementation with no errors!
>>
>> Thanks!
>>
>> 2008/6/26 Branden Strickland <[hidden email]>:
>>
>> https://issues.apache.org/jira/browse/OFBIZ-1853
>>>
>>> That wasn't so bad! ;P
>>>
>>>
>>> 2008/6/19 Jacques Le Roux <[hidden email]>:
>>>
>>>> Feel free to open a Jira issue, then we will see... There is clear
>>>> informations in
>>>> http://docs.ofbiz.org/display/OFBADMIN/OFBiz+Contributors+Best+Practicesplease read them if not already done
>>>>
>>>>
>>>> Jacques
>>>>
>>>> From: "Branden Strickland" <[hidden email]>
>>>>
>>>>> would you like me to comment on the POS write up on the page that
>>>>> describes
>>>>> the list of printers that work?  Or would you like me to comment on a
>>>>> particular jira issue?  Or at that extent, possibly create a whole new
>>>>> jira
>>>>> issue... which might be fun, since I haven't do that before!
>>>>>
>>>>> 2008/6/19 Jacques Le Roux <[hidden email]>:
>>>>>
>>>>>  I would suggest to do the simplest for you
>>>>>>
>>>>>>
>>>>>> Jacques
>>>>>>
>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>
>>>>>>  What exactly would you want?  Would you like a right up for the POS
>>>>>>> page
>>>>>>> for
>>>>>>> hooking up the network printer?  Or would you like me to find out
>>>>>>> where
>>>>>>> that
>>>>>>> small exception is found and try to fix?   It seems like it's being
>>>>>>> done
>>>>>>> within the Epson ADK java files, but whatever you'd like from me, I'll
>>>>>>> give
>>>>>>> a shot.
>>>>>>>
>>>>>>> Thanks -
>>>>>>>
>>>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>>>
>>>>>>>  Branden,
>>>>>>>
>>>>>>>>
>>>>>>>> Would you mind contribute this effort to the community ? Now that you
>>>>>>>> began
>>>>>>>> to send a 1st patch it should not be a big deal for you :o)
>>>>>>>>
>>>>>>>> TIA
>>>>>>>>
>>>>>>>>
>>>>>>>> Jacques
>>>>>>>>
>>>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>>>
>>>>>>>>
>>>>>>>>  Epson specifically tells you only to use the RJ11 cord with serial.
>>>>>>>>
>>>>>>>>   You're
>>>>>>>>> not to use it with the Ethernet connection.  I'm not sure why, but
>>>>>>>>> they
>>>>>>>>> insist that pass-through drawers and customer displays must not be
>>>>>>>>> used
>>>>>>>>> with
>>>>>>>>> Ethernet Drawers.
>>>>>>>>>
>>>>>>>>> Not a big deal..  I can modify the code to work.   I was just
>>>>>>>>> letting
>>>>>>>>> everyone know that the ethernet version does indeed work with ofbiz.
>>>>>>>>>
>>>>>>>>> 2008/6/18 Jacques Le Roux <[hidden email]>:
>>>>>>>>>
>>>>>>>>>  Why don' tyou use a simple pop-drawer connected to your printer
>>>>>>>>> with a
>>>>>>>>>
>>>>>>>>>  rj11
>>>>>>>>>> cable ?
>>>>>>>>>>
>>>>>>>>>> Jacques
>>>>>>>>>>
>>>>>>>>>> From: "Branden Strickland" <[hidden email]>
>>>>>>>>>>
>>>>>>>>>>  I aim to please.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>  I think this may be related to the fact that my pop-drawer is
>>>>>>>>>>> still
>>>>>>>>>>> configured in pos-components.xml and you can't hook them up to the
>>>>>>>>>>> Ethernet
>>>>>>>>>>> printers.
>>>>>>>>>>>
>>>>>>>>>>> ---- exception report
>>>>>>>>>>> ----------------------------------------------------------
>>>>>>>>>>> Exception: jpos.JposException
>>>>>>>>>>> Message: The power supply of the device is off.
>>>>>>>>>>> ---- stack trace
>>>>>>>>>>> ---------------------------------------------------------------
>>>>>>>>>>> jpos.JposException: The power supply of the device is off.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getRealtimeStatus(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.getPrinterStatus(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeCommon(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initialize(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.pntr.init.AbstractPrinterInitialization.initializeDevice(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.initializePrinterInstance(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>> jp.co.epson.upos.drw.CashDrawerPortControl.openPort(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>>
>>>>>>>>>>> jp.co.epson.upos.drw.CommonCashDrawerService.setDeviceEnabled(Unknown
>>>>>>>>>>> Source)
>>>>>>>>>>> jpos.BaseJposControl.setDeviceEnabled(Unknown Source)
>>>>>>>>>>> org.ofbiz.pos.device.GenericDevice.enable(GenericDevice.java:71)
>>>>>>>>>>> org.ofbiz.pos.device.GenericDevice.open(GenericDevice.java:46)
>>>>>>>>>>> org.ofbiz.pos.device.DeviceLoader.load(DeviceLoader.java:165)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> org.ofbiz.pos.container.JposDeviceContainer.start(JposDeviceContainer.java:50)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> org.ofbiz.base.container.ContainerLoader.start(ContainerLoader.java:101)
>>>>>>>>>>> org.ofbiz.base.start.Start.startStartLoaders(Start.java:263)
>>>>>>>>>>> org.ofbiz.base.start.Start.startServer(Start.java:312)
>>>>>>>>>>> org.ofbiz.base.start.Start.start(Start.java:316)
>>>>>>>>>>> org.ofbiz.base.start.Start.main(Start.java:399)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --------------------------------------------------------------------------------
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2008/6/17 和风赛跑 <[hidden email]>:
>>>>>>>>>>>
>>>>>>>>>>>  Could you supply the more detail about the exception you got?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  ------------------ 原始邮件 ------------------
>>>>>>>>>>>>  发件人: "Branden Strickland"<[hidden email]>;
>>>>>>>>>>>>  发送时间: 2008年6月18日(星期三) 中午11:39
>>>>>>>>>>>>  收件人: "user"<[hidden email]>;
>>>>>>>>>>>>
>>>>>>>>>>>>  主题: pos - network printer works
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>  I jus got my tm-t88IV working with the ofbis pos plugged into a
>>>>>>>>>>>> Switch
>>>>>>>>>>>> in another room!  Theethernet add in card worked like a charm!  I
>>>>>>>>>>>> get
>>>>>>>>>>>> one exception that is caught in the terminal but doesn't stop the
>>>>>>>>>>>> pos
>>>>>>>>>>>> from koading.  The print method works fine with it.  The error
>>>>>>>>>>>> was
>>>>>>>>>>>> somthing I'm assuming the serial port can provide and sais
>>>>>>>>>>>> something
>>>>>>>>>>>> like the poweer supply is off.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Hope this helps some one
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>