Ofbizsetup

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Ofbizsetup

mjcampbell
Hello All,
I am trying to use the ofbizsetup utility but when I go to https://localhost:8443/ofbizsetup I get a 400 error.  I have followed the instructions listed below.

Any help or direction that you can provide would be greatly appretiated!

1. Open a new terminal.
2. Go to your ofbiz directory.
3. Clean out all built classes with : ./ant clean-all
4. Load the seed data with : ant run-install-extseed
5. Create the admin user with : ./ant create-admin-user-login , then enter a user login id that will be created for you (the initial temporary password is "ofbiz")
6. Start ofbiz with : ./startofbiz.sh
7. Connect to the OFBiz Setup application with your browser at https://localhost:8443/ofbizsetup.

Thanks
Matt
Reply | Threaded
Open this post in threaded view
|

Re: Ofbizsetup

Jacques Le Roux
Administrator
I was curious, you don't need to run "ant run-install-extseed" with OOTB data
ant run-install-seed is enough as any ext data exist OOTB
It was more to reassure myself (I thought I had missed something on a recent installation, ouf), but I think it's important to
notice

Jacques

From: "mjcampbell" <[hidden email]>

> Hello All,
> I am trying to use the ofbizsetup utility but when I go to
> https://localhost:8443/ofbizsetup I get a 400 error.  I have followed the
> instructions listed below.
>
> Any help or direction that you can provide would be greatly appretiated!
>
> 1. Open a new terminal.
> 2. Go to your ofbiz directory.
> 3. Clean out all built classes with : ./ant clean-all
> 4. Load the seed data with : ant run-install-extseed
> 5. Create the admin user with : ./ant create-admin-user-login , then enter a
> user login id that will be created for you (the initial temporary password
> is "ofbiz")
> 6. Start ofbiz with : ./startofbiz.sh
> 7. Connect to the OFBiz Setup application with your browser at
> https://localhost:8443/ofbizsetup.
>
> Thanks
> Matt
> --
> View this message in context: http://n4.nabble.com/Ofbizsetup-tp584981p584981.html
> Sent from the OFBiz - User mailing list archive at Nabble.com.
>


Reply | Threaded
Open this post in threaded view
|

Re: Ofbizsetup

hans_bakker
In reply to this post by mjcampbell
This is a pretty difficult one, because it is working fine here.

It does not matter what kind of data is loaded
https://demo.ofbiz.org/ofbizsetup should always work and should show the
login screen as on the demo site.

did you do any modifications, is it a standard system?

Regards,
Hans

On Mon, 2009-11-09 at 08:08 -0800, mjcampbell wrote:

> Hello All,
> I am trying to use the ofbizsetup utility but when I go to
> https://localhost:8443/ofbizsetup I get a 400 error.  I have followed the
> instructions listed below.
>
> Any help or direction that you can provide would be greatly appretiated!
>
> 1. Open a new terminal.
> 2. Go to your ofbiz directory.
> 3. Clean out all built classes with : ./ant clean-all
> 4. Load the seed data with : ant run-install-extseed
> 5. Create the admin user with : ./ant create-admin-user-login , then enter a
> user login id that will be created for you (the initial temporary password
> is "ofbiz")
> 6. Start ofbiz with : ./startofbiz.sh
> 7. Connect to the OFBiz Setup application with your browser at
> https://localhost:8443/ofbizsetup.
>
> Thanks
> Matt
--
Antwebsystems.com: Quality OFBiz services for competitive rates

Reply | Threaded
Open this post in threaded view
|

Re: Ofbizsetup

JDKHead
I've also just gone thru these same steps, however when I visit localhost.../ofbizsetup, I see a white screen (view source also blank).  Not receiving a 404, and no lines scroll by in the application output

have tried:
https://127.0.0.1:8443/ofbizsetup
http://127.0.0.1:8080/ofbizsetup

Just for the heck of it I tried:
http://127.0.0.1:8080/ofbizsetuppp
https://127.0.0.1:8443/ofbizsetuppp

Behavior is identical, like it's not finding an app no matter what path it's looking for.

My setup is near-default using ofbiz-rel9.04-current.zip downloaded evening of 11/19/2009
The only change is to use "localpostnew" as the datasource.  One thing that was unclear for me from the various docs is whether the <group-map group-name="org.ofbiz.olap" ...> also should change to localpostnew.   I've tried leaving it as derby and changing it to localpostnew.  Neither end up with anything at /ofbizsetup, but the various apps do come up.  There are no entries in the party table, and no parties when searching for party ID "Company"




Hans Bakker-2 wrote
This is a pretty difficult one, because it is working fine here.

It does not matter what kind of data is loaded
https://demo.ofbiz.org/ofbizsetup should always work and should show the
login screen as on the demo site.

did you do any modifications, is it a standard system?

Regards,
Hans

On Mon, 2009-11-09 at 08:08 -0800, mjcampbell wrote:
> Hello All,
> I am trying to use the ofbizsetup utility but when I go to
> https://localhost:8443/ofbizsetup I get a 400 error.  I have followed the
> instructions listed below.
>
> Any help or direction that you can provide would be greatly appretiated!
>
> 1. Open a new terminal.
> 2. Go to your ofbiz directory.
> 3. Clean out all built classes with : ./ant clean-all
> 4. Load the seed data with : ant run-install-extseed
> 5. Create the admin user with : ./ant create-admin-user-login , then enter a
> user login id that will be created for you (the initial temporary password
> is "ofbiz")
> 6. Start ofbiz with : ./startofbiz.sh
> 7. Connect to the OFBiz Setup application with your browser at
> https://localhost:8443/ofbizsetup.
>
> Thanks
> Matt
--
Antwebsystems.com: Quality OFBiz services for competitive rates
Reply | Threaded
Open this post in threaded view
|

Re: Ofbizsetup

BJ Freeman
In reply to this post by hans_bakker
you are correct it is not in the 9.04
it is only in the trunk.


JDKHead sent the following on 11/20/2009 10:53 AM:

> I've also just gone thru these same steps, however when I visit
> localhost.../ofbizsetup, I see a white screen (view source also blank).  Not
> receiving a 404, and no lines scroll by in the application output
>
> have tried:
> https://127.0.0.1:8443/ofbizsetup
> http://127.0.0.1:8080/ofbizsetup
>
> Just for the heck of it I tried:
> http://127.0.0.1:8080/ofbizsetuppp
> https://127.0.0.1:8443/ofbizsetuppp
>
> Behavior is identical, like it's not finding an app no matter what path it's
> looking for.
>
> My setup is near-default using ofbiz-rel9.04-current.zip downloaded evening
> of 11/19/2009
> The only change is to use "localpostnew" as the datasource.  One thing that
> was unclear for me from the various docs is whether the <group-map
> group-name="org.ofbiz.olap" ...> also should change to localpostnew.   I've
> tried leaving it as derby and changing it to localpostnew.  Neither end up
> with anything at /ofbizsetup, but the various apps do come up.  There are no
> entries in the party table, and no parties when searching for party ID
> "Company"
>
>
>
>
>
> Hans Bakker-2 wrote:
>> This is a pretty difficult one, because it is working fine here.
>>
>> It does not matter what kind of data is loaded
>> https://demo.ofbiz.org/ofbizsetup should always work and should show the
>> login screen as on the demo site.
>>
>> did you do any modifications, is it a standard system?
>>
>> Regards,
>> Hans
>>
>> On Mon, 2009-11-09 at 08:08 -0800, mjcampbell wrote:
>>> Hello All,
>>> I am trying to use the ofbizsetup utility but when I go to
>>> https://localhost:8443/ofbizsetup I get a 400 error.  I have followed the
>>> instructions listed below.
>>>
>>> Any help or direction that you can provide would be greatly appretiated!
>>>
>>> 1. Open a new terminal.
>>> 2. Go to your ofbiz directory.
>>> 3. Clean out all built classes with : ./ant clean-all
>>> 4. Load the seed data with : ant run-install-extseed
>>> 5. Create the admin user with : ./ant create-admin-user-login , then
>>> enter a
>>> user login id that will be created for you (the initial temporary
>>> password
>>> is "ofbiz")
>>> 6. Start ofbiz with : ./startofbiz.sh
>>> 7. Connect to the OFBiz Setup application with your browser at
>>> https://localhost:8443/ofbizsetup.
>>>
>>> Thanks
>>> Matt
>> --
>> Antwebsystems.com: Quality OFBiz services for competitive rates
>>
>>
>>
>

--
BJ Freeman
http://www.businessesnetwork.com/automation
http://bjfreeman.elance.com
http://www.linkedin.com/profile?viewProfile=&key=1237480&locale=en_US&trk=tab_pro
Systems Integrator.

Reply | Threaded
Open this post in threaded view
|

Re: Ofbizsetup

Prashant
In reply to this post by mjcampbell

Have you been able to resolve this problem. I installed the latest stable build 9.04 and am getting the same problem.